I just had a logic board replacement and upgrade to 10.9.2, now adobe master suite will not work

logic board  replacement on mac book pro, and upgrade to 10.9.2; and my adobe master's suite will not work;the CS4 remains on my applications of hard drive ;computer tells me to contact Adobe??

These are user forums.  You need to contact Adobe support directly, by phone or web chat.

Similar Messages

  • I just had my logic board replaced. now im having trouble using the interent even with a strong connection and the internet is working on other devices!! please help me :(

    I just had my logic board replaced. i am now having trouble with using the interent even with a strong connection. all other devices are having no problem with the internet. please help

    Test while started in Recovery : if the problem persists, then it likely is a hardware issue.
    Resetting the System Management Controller (SMC) probably won't change anything, but you can readily do it before contacting the repairers.

  • We just had our logic board replaced on our G4 2005 model is this common?

    I have done some looking and seems the older G3 and G4s had this problem so maybe ours was a rarity. Also in my research seems apple came up with a separate coverage so do we need this in addition to the applecare extended warrantee?

    I have done some looking and seems the older G3 and
    G4s had this problem so maybe ours was a rarity.
    Also in my research seems apple came up with a
    separate coverage so do we need this in addition to
    the applecare extended warrantee?
    Wow! Didn't know I would be bashed for being consise. It is a G4 ibook we bought it Oct. 2005, (this is b/c I noticed in other posts that the G4 ibook date back to 2002). Not sure how else to put it as it was in my post earlier, "we just had our logic board replaced on our G4 ibook (which is stated in the original at the bottom corner as the brilliant apple people have designed to keep these consise) 2005 model is this common," then in the message it goes on to say that I have found other posts and other sites that have people typing about having to have their logic boards replace/repaired 2-3 times, ie this example below.
    RE: logic board
    Posted: Nov 7, 2005 11:40 PM in response to: Douglas Oconnor by Ronda Wilson
    Douglas,
    Apple didn't knowingly sell faulty goods. Once the problem was identified, Apple stepped up to the plate with the iBook Logic Board Repair Extension Program (which is not a recall — they are being fixed when and if they fail, but have not been recalled), and your iBook still falls under the three-year plan.
    If that is not satisfactory to you, please take the measures I outlined in my previous post to you.
    Sorry to not be more specific in the first post, I figured since my search brought this issue up immediately someone out there would know about this.
    And to the second response, no I don't have a clue the difference is, that is why I bought an apple, suppose to be easier for those of us who are computer challenged.

  • I just had my Ipod touch replaced and I wanted to sync my content back on but its not recognizing my new device. How do I sync my stuff back on?

    I Just had my Ipod touch replaced and wantedto sync my content onto my new one but itunes isnt recognizing my new device. What do i do for it to be recognized so I can get my things back on it?

    Try here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Make sure yo have iTunes version 10.7

  • Just had my logic board replaced, dim screen with no brightness control

    My MacBook Pro 17 inch was just in for repair due to the nvidia 8600 issue (no video, Mac won't boot, etc.). I have it back as of this afternoon but when I turned it on the screen is unbelievably dim -- almost as if I have the brightness at the second-to-lowest level.
    Here's the catch: when I attempt to use the brightness control, either via F1/F2 keys or in System Preferences the brightness will not change. The icon overlay shows up on the screen as if it is working but the screen brightness just doesn't work.
    When I bring the brightness indicator all the way down, to the point where the screen would normally shut off, the screen stays on...but it's just the same dim screen.
    Any ideas?

    Test while started in Recovery : if the problem persists, then it likely is a hardware issue.
    Resetting the System Management Controller (SMC) probably won't change anything, but you can readily do it before contacting the repairers.

  • Performing a system restore on iBook that has had its logic board replaced

    I want ot do a system restore on my iBook G3. I had to send it in for a logic board replacement and received new install discs when it was returned to me. My problem is that I would like to have my iPhoto software and iMovie software that was installed on my computer when I purchased it. I have to do a clean install with the Mac OS X 10.3 disks that were shipped with the replacement of the logic board I will lose this. I want to use the system restore disks that came with my iBook when I originally purchased it. Is this possible since I have had my logic board replaced?

    The simplest way to reinstall iPhoto and iMovie is to download Pacifist and then extract the relevant applications from the Software Restore Discs.
    Pacifist comes with instructions; this is not a difficult operation and there is no need for erase & install to recover the applications.
    Pacifist is Shareware, but you need not pay the fee in order to use it. Every time that you open Pacifist you will be prompted to purchase a licence. If you feel that Pacifist is worth the money (and I think that it is), you can purchase a licence at any stage.
    If you're a plonker like me, then purchasing a licence will provide justification for third party developers like CharlesSoft to save the day for the rest of us.
    Good luck!

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • I just had my hard drive replaced, and now when I am online get a black screen when trying to open a pdf. Any help would be appricated

    I'm getting a black/blank screen when trying to open a Pdf. off the internet. Can some one please tell me what to do to fix this? I just had my hard drive replaced and never had this problem before. Thank you

    try downloading adobe acrobat reader and installing it......

  • Hi i just had my imac hdd replaced and since then ive had nothing but problems...i cant find imovie iphoto or anything and i followed the steps mentioned on here go in app store and buy but my account wont be charged...but it did...can someone pls advise.

    Hi i just had my imac hdd replaced and since then ive had nothing but problems...i cant find imovie iphoto or anything and i followed the steps mentioned on here go in app store and buy but my account wont be charged...but it did...can someone pls advise.

    Hi i've done everything that i was advised on...and also another problem i tried to restore my mac and it keeps sayin disk erase failed couldnt unmount disk!...i'm so angry i swear....someone somewhere dont know what they doing....

  • After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

    After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

    Hard drive sensor or logic board failure.
    Try a SMC Reset, only thing I can help.
    http://support.apple.com/kb/ht3964
    Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
    http://support.apple.com/kb/ht1547
    Take it back. three times a charm

  • I recently had my logic board changed on my Mac Book pro. Now I have more than 5 computers authorized fo iTunes. How do I de-authorize a computer I do not have access too?

    I recently had my logic board changed on my Mac Book pro. Now I have more than 5 computers authorized to iTunes. How do I de-authorize a computer I do not have access too?

    If you have reached the limit of 5, then deauthorize all and authorize the active computers:
    About iTunes Store authorization and deauthorization

  • I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    Back to Snow Leopard from Lion install method
    Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
    Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
    If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
    Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
    Here we go!
    Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
    Look at the Utilities Menu for Disk Utility.
    On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
    This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
    When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
    When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
    Update OS X to 10.6.8 using the Combo Update for best results.
    http://support.apple.com/kb/DL1399
    (Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
    Final step optional but highly receommended.
    A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version..  (in addition to TimeMachine drive for more immediate backups.)
    It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

    Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

    Ask your less than helpful provider for the server settings and setup the new account up manually.
    You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
    You need the same info for the SMTP server for outbound mail.

  • I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

    I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

    As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
    Official statement from Apple:
    http://support.apple.com/kb/ht3152

Maybe you are looking for

  • Availablity check at storage location level in STO

    Hi,   There is an unique requirement from my client with respect to the Availability check at storage location level in STO Process:   Based  on the inputs from APO we are creating STR for moving the material from one plant to another plant. These ST

  • Problems with document flowing after placing a movie inline

    I'm trying to place a movie inline and have the contents surrounding it reflow, instead when the movie is placed it overlaps all of the contents above it. I'm placing a movie using the following code: paragraph.insertionPoints[-1].place(File("c:\\use

  • Apple Mail 2.1.3 imap issue

    I have three Gmail accounts, one of which is a university account. I have them all imap enabled through my Apple Mail. I am unable to access my university account because I am getting a Connection Failed message that says: There may be a problem with

  • How do add a new line in the JavaScript Editor?

    I have a script like this: var n = this.getField("score").value; if (n >= 0 && n < 5) {     event.value = "The WP 100% Bond\nThe WP 10% Stock / 90% Bond\nThe WP 20% Stock / 80% Bond"; I want to output that line like... The WP 100% Bond The WP 10% Sto

  • Verizon in Puerto Rico

    does extended coverage mean that it is charged as part of my plan with no additional fee?