I just had a new hard drive installed on my iMac
i just had a new hard drive installed on my iMac (due to the Seagate replacement program) i was able to migrate my back up(i think) but its now acting like a new computer and i can't get past the registration screen. I filled everything out but the "continue" button won't highlight and let me cxontinue.
Ah the mac wants to play games..
Ok, You should be able to click on continue twice so to skip it.
What version is the OS you restored? Or did you just perform Migration Assistant on it?
Similar Messages
-
I cannot seem to migrate the full time machine backup from an external hard drive back to the new hard drive. Finder sees the drive and files. When I use Migration managers, it only sees the computer hard drive after I select the time machine option to restore the files.
Welcome to the Apple Support Communities
With what OS X version did you make the backup? If it was the same as the version you are using now, you don't have to use Migration Assistant to restore the backup. Instead, there's a safer and better method, but you will lose all the changes you have made since the last time you made the backup.
Just hold Command and R keys while your Mac is starting to start into OS X Recovery. Then, select the option to restore a Time Machine backup, and follow its steps. Also, you will be able to select the backup you want to restore -
i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?
Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2. -
My HP Photosmart c309a will not work. I just had a new hard drive installed on my computer
My HP Photosmart c309a will not work. I just had a new hard drive installed on my computer
Please download the driver from the HP website (that matches your operating system).
-
I had a new hard drive installed on my IMac. Now I am trying to reload everything back on. I do have time machine. How do I find all my pictures on TIme Machine to load back on IPhoto. I hope I haven't lost all my family photos. Help! Thanks a bunch!
Hi, I never use TM, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
Had a new hard drive installed on iMac. No back up. How do I transfer my music, audio books on my iPhone to the Mac
Do you have the original hard drive?
If you purchased the music and books from the Apple iTunes store you can redownload (most of) them again. -
My hard drive died on my MacBook Pro. So the Apple store installed a new hard drive for me yesterday. Now I can't find Pages or Numbers at all. Do I have to purchase these? Thanks for the feedback!
Did you purchase them or did they come with your Mac?
-
What do I need to purchase to update my IMac with the OS X 10.5.8 operating system?
All Intel iMac's can run 10.6 Snow Leopard.
To get it, go to > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
If you want Mountain Lion, you wiil need to check and see if it meets the requirements.
see > Upgrade your Mac to OS X Mountain Lion. -
I just had a new hard drive installed at the Apple Store. When I looked at it, the hard drive was named snow08
Is that odd? Do I have someone else's hard drive?I think apple named your drive snow08. I really don't think they would replace your drive without the new one completly erased, that would be pretty sloppy of them. I guess they could have, i just do not think they would have!
-
I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?
You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions. -
Just had a new hard drive for my iMac and reloaded all my stuff via time capsule, all works fine apart from Safari which won't connect to internet. Airport is connected but each time Safari comes back saying there is no connection....any help gratefully recieved.
So you have the apple rotuer called a time capsule and you have complete the frist time machine back up? but there is not internet access ?
If so.
Opem airport utiltiy on your Comptuer :
What is the IP ? > if its 169.254.xx.xx > its a self assigned
Try power cycling the Internet source for up to 1 mintue and make sure all the lights turn off.
In Airport Utility Version 5.5.3 / 5.6.1
Gi > Intenret > conncetiong sharing > Is it off bridge mode change it to share a public Ip address
In airport Utility version 6.0/6.1
Edit > network > rotuer mode : Should be DHCP and NAT unless you use PPPoE to conecnt to the internet then this is automatically invoked. -
Had a new hard drive installed and want to move book marks to new drive
I had a new hard drive installed and want to move my book marks from the old HD to the new HD
Not sure how to access the FireFox book marks on the old HD and how to install them in the FireFox on the new driveSee [[recovering important data from an old profile]] in particular the section "Copying files between profile folders" and the one below it that describes the files in the profile folder.
The article shows how to find your current profile folder, you will need to find the equivalent folder on the old drive, the path to the current profile folder should show you where to look on the old HD for the old profile folder. The actual folder name for the profile folder will be different, but the path to it should be the same. -
had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete". can this be repaired without going to the repair shop?
What installed iPhoto there in the first place? Was it the same version of iPhoto that came with the Mac? Was iLife added at a later time from a Mac Box Set? You can selectively install iPhoto, and then apply the appropriate iLife update without taking it to the shop, after removing the application, or recover it from your backup.
-
I have a powerbook G4 running OS X 10.5.8. I had a new hard drive installed and now cannot access my itunes. I do I get my itunes that I purchased?
Hi,
Read this. http://support.apple.com/kb/HT2519
Jim -
Help, just got a new hard drive installed and now my videos in iPhoto say, "a necessary data reference could not be found"
Not sure what happened but I was able to click on the movie, go to File then Reveal in Finder, then drag it to my desktop and then drag it back into iPhoto and it worked.
Maybe you are looking for
-
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Net
-
CRM_SURVEY_LEAD already exists
Hi all, In the lead transaction when we fill a questionnaire and submit the answers and save the lead transaction we get an error pop up message saying application CRM_SURVEY_LEAD already exists. Im on CRM 4.0 pack level 7 any help will be appreciate
-
INVALID REGION(S) CHANGED!!!!!!!!Help
Since two weeks....sometime when I open some sessions a window say "invalid region(s)changed".....result: some audio tracks lost! (definitively lost also in the audio window!!)...or some tracks move or change position. I can find a solution....it did
-
Migration LC8.0.1 to LC 8.2 xfa form issue
Hi, I migrated from LC 8.0.1 SP3 to LC 8.2. My process work fine but when I use the workbench, I can see the xfaform variables in the XPath Builder in red with the message : Error: java.lang.reflect.Invokation.TargetException). I can use them in proc
-
Cant use converion Exit in DBConnect Datasource
Hi, all! When I create DBConnect Datasource and try to set conversion routine, BW shows warning message: Message no. RSDS041 Conversion exit is not being executed When I set [E]xternal or [C]heck field format BW shows error message: Message no. RSDS_