I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

Hallo  Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards  - Alan

Similar Messages

  • Upgraded to Yosemite and now my Time Capsule says it does not have enough space to complete backup, yet it has 500 GB free space?

    I have just upgraded to Yosemite and now my Time Capsule says it does not have enough space to complete backup, yet it has 500 GB free space?
    I am using the latest mac book pro and hacvent added anything aside from the upgraded iOS so not sure why the Time Capsule is saying that there is not enough space.
    How can i fix this problem?

    Time Machine has to completely index all of the old backups that are already on the Time Capsule before you can run a new backup successfully.
    That process is going to take a long time......probably 6-10 hours or more if your Mac is connected to the Time Capsule using a wired Ethernet connection.
    If the Mac connects using wireless, it may take a day or two for the process to complete depending on the speed of your connection and the amount of data that you already have on the Time Capsule.
    Wait a day or two for the indexing process to complete and then try to run a new backup again.

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Hello, Trying to run Bootcamp on my 15" Macbook Pro (Maverick).60 gig available on my computer's hard drive and 250 gig on a separate hard drive that I have attached which is single partitioned. Keeps saying "The startup disk does not have enough space"

    Hello,
    I'm trying to run Bootcamp on my 15" Macbook Pro (Maverick). I have 60 gig available on my computer's hard drive and have 250 gig on a separate hard drive that I have attached, which is single partitioned (MS-DOS FAT). It keeps saying "The startup disk does not have enough space, you must have 28 gig of free space available" Does anyone know what I'm doing wrong? Any help would be much appreciated.

    Thanks for the advice Bob The Fisherman. I'm just reading what turbostar has kindly written and it appears that perhaps, if I take advice from you both, I need to free more space up on the computer's hard drive?
    With the external hard drive; would it be advisable to defragment? Know of any defrag freeware for Mac OSX?
    Many thanks to you both.

  • I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

    Here's the story...
    I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
    I decided to reinstall windows.
    I deleted the windows partition using BootCamp.
    Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned  You must have at least 10 GB of free space available"
    After reading several posts on this forum I decided to defrag the hard drive and try again. 
    The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
    Any suggestions?
    Also, I tried repair disk and repair permissions
    Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)"  Could the 32-bit requirement be an issue? Is lion 64-bit?

    Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

  • The startup disk does not have enough space to be partitioned

    I have a custom upgraded Mac Mini (from 1.6 Core Duo to 2.33 Core 2 Duo & 64GB SSD - a fast little machine!) Under Leopard 10.6.6 & could create a BootCamp partition. Now after a reformat & upgrade to 10.6.7, BootCamp reports, "The startup disk does not have enough space to be partitioned". BootCamp says it needs 10 GB free space. The Finder says there is 23.4 GB available.
    Has anyone else run across this?

    Backup. Format. Restore.
    Windows 7 needs 40GB+
    HFS needs 20GB/20% free space to function.
    64GB is fine -- but just one OS, not two. 
    you might squeeze OS X into 30GB if you move and trim a lot.
    Windows 7 SP1 32-bit - the updates take 9GB of space (temp) on top of 20-25GB plus you'll need to disable page, hibernation, not install programs, and leaves little for TRIM and Garbage Collection.
    When Windows gets too low, you can be blocked from login or runnng.

  • "The startup disk does not have enough space to be partitioned?" WHY!??

    I"m trying to intall windows 7 on my Macbook air  OS X 10.6. When i enter bootCam i get this error "The startup disk does not have enough space to be partitioned" . It says I need 10GBs of free space, even though I have 500GBs of free space on my drive external hardriver.
    I did my research, and a lot of people are saying to use idefrag and defrag the hardrive, which i did. I also verifed disk permissions and repaired disk permission and all the other stuff.
    What should i do? Apple hass the shittiest service. I spend $1100 bucks for something and i don't even get support without paying? to me, that's BS. so if anyone could help i would greatly appreciate it.

    Thanks Bob.
    And now to close this thrilling episode we will sing the "Dragnet Theme Song". All together now.....
    “Dum De Dum Dum…”
    “Dum De Dum Dum Dum”

  • I'm trying to download itunes onto an external harddrive, but it keeps defaulting to my computers drive which does not have the room. How do I sort this please?

    I'm trying to download itunes onto an external harddrive (named as D) which has loads of space, but it keeps defaulting to my computers (C) drive which does not have the required space. How do I sort this please?
    I've tried selecting the D drive but, it still defaults to my computers drive and wont let me change it.
    Heeeeellllllllpppppp!

    I think you've misunderstood.
    iTunes ONLY works on the C drive.  There is no moving it.  End of discussion.
    The MEDIA can be house on any other drive (internal or external).
    Install iTunes correctly using the default options.
    Once it is installed and working correctly with everything on the C drive, close iTunes.
    Follow the instructions here: http://support.apple.com/kb/HT1364 to move the iTunes media folder.

  • Asking the Bridge Team:  Bridge "working color space" setting when one does not have the Suite?

    Common sense tells me there is really no such thing as a
    "working color space" in Bridge, because
    Bridge is not an image editor, just a browser
    Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
    Is there a way to set the Bridge
    "color settings" when one does not have the suite?
    The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
    (not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
    It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
    But what if I wanted Bridge to assume my
    Photoshop color working space for untagged images
    so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
    My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
    there is really no such thing as a
    "working color space" in Bridge, because Bridge is not an image editor, just a browser.
    Thanks in advance.

    Hi Ramón,
    Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
    It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
    I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
    My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
    How do I report this to the Colour Police at Adobe?!?

  • Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not  have the proper security settings. Help!?!?

    Hello:
    I keep getting this message upon startup. Can't figure out how to address it. Here it is.
    "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
    Any suggestions?

    There's an invisible one name "Icon" according to the error message.
    Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder.  At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    killall Finder
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    killall Finder
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

  • Solaris: The System does not have the required swap space

    I'm trying to install Oracle onto Solaris 9. The installation check fails with the error
    The System does not have the required swap space.
    I've read the install Guide I get the following when I do the memory checks
    bash-2.05# /usr/sbin/prtconf | grep "Memory size"
    Memory size: 1024 Megabytes
    bash-2.05# /usr/sbin/swap -s
    total: 767688k bytes allocated + 117080k reserved = 884768k used, 379040k available
    The install guide doesn't say how to increase the Swap Space. I would like to increase the Swap Space just for the duration of the installation. From the install guide I'll need a Swap Space of 1.5 times the Ram on the machine so I'll need 1.5GB Swap Space. Can someone help me out with the required syntax to increase the Swap File Size?

    Found something on the web that did the trick. Create a few files and then add to your swap.. In case it's of interest to anyone else here's what I had to do
    swap -l (lists files in swap)
    mkdir /tmp/swap/ (create dir for file to add to swap)
    mkfile tmp/swap/swap11 (create file for swap)
    swap -a tmp/swap/swap11 (add file to swap)
    swap -l (check files in swap)

  • Hard Drive does not have enough space/error message

    Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
    I only have a 1 GB machine. What am I doing wrong?
    When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
    The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
    In addition, it turns itself off often, for no apparent reason. Any ideas?
    Thanks!
    J.Renee

    The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
    To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
    You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
    If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I'm trying to install iOS 5.0 but getting message that my computer does not have sufficient space to backup my iPad; continuing will result in loss of all media on iPad. I was going to install iCloud but it seems that you have to have iOS 5.0, help?

    i'm trying to install iOS 5.0 but getting message that my computer does not have enough space to backup my iPad and continuing will result in loss of all media on iPad.  an option seemed to be backing up on iCloud, but i think you have to have iOS 5.0 to install iCloud.
    how do i install iOS 5.0 without losing anything on my iPad?

    If you really do not have enough space on your HDD for a backup of your iPad, you do not have enough space at all. Free up at least 15% of your HDD, in any case more than 0.8GB for the iPad update.
    Make backups on an external disk.
    After freeing up enough space, try again.

  • I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition????

    I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?

    The problem is, reformatting the partition may require you erase the hard drive.   Normally Intel Macs are preformatted GUID.    The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice.   Regardless, you should backup your data before you upgrade.  GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s.    So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.  

Maybe you are looking for

  • Single-Sign-On (SSO) configuration on JAVA Stack through HTTP Header method

    Hello SDN community, in the context of a Proof of Concept, we are testing the integration of Microsoft Sharepoint Portal with SAP Backend (addin) systems. As the architecture impose use an external scenario (access from the internet), we couldn't use

  • HP Color LaserJet CP1518ni & Windows 7 via network

    I have a HP Color LaserJet CP1518ni connected to the network, not via a USB cable. How to I setup this printer so I can print to it from my WIndows 7 machine? Will HP be coming out with anything other than the Universal Print Drivers for this printer

  • EMail + spool printing

    Hi Experts.. I have a requirement where i am using exit & BTE for mail sending thru Dunning, f.27 & APP.. Though the mail is goin perfectly but I need to generate spools alongside mail generation too.. But prob is tht at a time C_FINAA-NACHA can have

  • App Update Error

    Hi, we´ve got a newsstand app v24. Yesterday I tried to update the app with the DPSAppBuilder DPSAppBuilder-2.5.0.36.69922. But I can´t complete the procedure, in the window where I schould enter the certificate, a pop up with no error mesaage appear

  • Loading XML problem with spry

    I have a php page that creates a recordset from mySQL and the exports it as XML so I can load it into dreamweaver to use with spry this particular recordset filters the results according to a session variable, so the results are relevant to the logge