I just have questions about the AirPort Express and how it works.

My household Wi-Fi is not the strongest in  my room and I found out about the AirPort Express and I read the overvie, but I still have some questions on how it works, how its setup and other questions as well.

The AirPort Express will not wirelessly extend the signal from another router unless that router is also an Apple product.
Not sure what other questions you might have, but we'll try to answer if you want to ask.

Similar Messages

  • Want to know about the AirPort Express and AirTunes

    I have been contemplating purchasing an AirPort Express to stream music from my bedroom into the entertainment room in a 4 bedroom apartment. I have a wireless G D-link router which could be better but its not going to get better any time soon. As far as AirTunes goes, i have been researching it but still have questions on how it works exactly. Also, is it possible to play music through the speakers that are currently hooked up to my computer and through the stero in my living room simulaneously with this device.

    So i have the airport express and i want to use internet at the same time as streaming my music to my stereo. I also have a router that i normally use for internet. My problem is, how do i use them at the same time because the airport run's or the router runs not both. I tried running a ethernet cord from the router to the airport express, and i can now recieve internet and stream music, but i want to be able to use my router instead of the express. also if i can't and have to go through the express, can i password protect the internet connection because i have no idea how to use settings for this device?

  • I saw the commercial for upgrading to the iphone6 and also chatted with a rep. She explained about the trade in and how it works. The one thing she didnt tell me nor does the commercial is that you have to be eligible for an upgrade. So another wasted tri

    I saw the commercial about upgrading to the iphone6 and also chatted with a rep about it. She explained how the trade in works. Neither she not the commercial says anything about being eligible for an upgrade. So another wasted trip to Verizon. I will be eligible for upgrade in Feb 2015. I have the 5s in excellent condition. If I am willing to extend my contract for another 2 yrs I don't see why it should matter about an upgrade. I think I should be able to trade in and get reduced price. Just another ripoff but at least they could tell you upfront what is expected before a trip is made..

    You don't need to be eligible for an upgrade to take advantage of the trade-in. You can still get the $200 off on the trade in, however I think that offer may have already expired. The $200 off would simply be on the full retail price which starts at $650.
    You have to be eligible for an upgrade to get a discounted phone, but that has ALWAYS been the case. The commercial says NOTHING about waiving that requirement of the contract you had already signed. The trip was wasted ONLY because you were hoping to get out of your contract when NO indication you would be able to do so was given.
    Verizon doesn't "extend" contracts as you would like because Verizon would have people with 10 year contracts and an ETF of over $1000 if they chose to leave. Of course, people would then complain about that.
    Example:
    Sign a 2 yr contract and have a $350 ETF.
    After a year, you want a new phone and extend the contract 2 years(3 years total now) with another $350 ETF, bringing the ETF up to $350 + $350 - $120 = $580
    After a year, you want a new phone and extend the contract 2 years(4 years total now) with another $350 ETF, bringing the ETF up to $350 + $580 - $120 = $810
    After a year you want a new phone and extend the contract 2 years(5 years total now) with another $350 ETF, bringing the ETF up to $350 + $810 - $120 = $1040.
    ONLY 3 years after signing your original contract someone could easily be locked in with a 5 year contract and a $1040 ETF for a single line. Verizon would be CRAZY to allow people to do this.

  • I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

    I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
    Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
    Thank you a lot in advance.

    I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes:  Latest software versions of everything.  No iPad, iPhone or Touch.  Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this.  The MacBook streaming iTunes is usually 12 feet from AX.  I've used this setup for years of trouble-free AirTunes / Airplay until today.  Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped:  Turned off IPV6.  Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX).  Turned off 'Ask to Join new (WiFi) Networks'.  Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it).  Here's my discoveries:  Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.)  iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts.  So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing).  Lo and behold, the dropouts stopped altogether.  No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED.  That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan.  Works for me, written using Chrome.  The other reliable fix is to hardwire MacBook to the Switch.  This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet.  Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

  • I play music on my hi fi via an airport express attached to my iMac. Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before. I have reset the airport express and reconfigure my wireless settings.

    I play music on my hi fi via an airport express attached to my iMac.
    Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
    I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
    I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
    Has anyone else been having the same types of problem, and better still has anyone got the answer?

    When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.

  • I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

    I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

    If you are talking about features of the MBP itself, as long as you are not looking at  the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade.  Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
    If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
    The Hi Res screen is good if you do a lot of graphics work.
    Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
    If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
    Just some thoughts.

  • I have the airport express and trying to connect to the internet on my Vizio and can't find a code to put in to connect..

    I have the airport express and trying to set up internet service on my TV (Vizio) but having no luck.... I need a code to enter in order to connect! Can you help?

    Hi - you might be getting full bars but a slow connection - games can be very sensitive to this - have you tried connecting via ethernet to see if it is better? - however if your wireless speed is good too then it could be a ps3 issue and a call to their support might help - otherwise there could be interference issues, radio channel conflicts, etc. - without knowing the specific aspects of your entire network environment it is hard to make any more suggestions.

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

    Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
    I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
    Thanks.
    laci

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • HT4437 can i have more than one apple tv at different locations by ethernet on the same router  thinking of dumping the airport express and hard wiring an apple tv if this is possible

    can two apple tv's be used on the same network and router they would be in different locations one inside the house and one for an outside system?  may dump the airport express and go to ethernet wired direct to each apple tv from same router..   

    Welcome to the Apple Community da dad.
    Yes you can connect multiple Apple TV's by ethernet.
    What do you mean by outside.

  • Music through the Airport Express and Wireless Headphones

    I have the Airport Express and have an audio cable connected to my stereo so I can play music wirelessly.  But now I have a complicated question.  Is there any wireless headones that will work with this so that the music is not played through the stereo speakers but through this wireless headphones? 
    --Gilbert

    I finally figured it out!  I needed to extend my my network using my Verizon Wireless network but then under the Music icon on the Airport Utility, I selected Enable Airplay and selected an iTunes speaker name that is the same as the name chosen for my Airport Express name.  This way, I can connect to my wireless network which the Airport Express is extending, but select my Airport Express as the speaker.  Woohoo!

  • I have a second generation airport express and i cant manage to extend my wifi

    I have a second generation airport express and i cant manage to extend my wifi

    So im going to need another airport express to extend my wifi wireless
    That is correct. 
    One AirPort will connect to your router with a short Ethernet cable and be configured to "create" a wireless network. 
    The second AirPort will be configured to "extend" a wireless network.

  • Airport Express and Airtunes not working

    Hi all. I have a Digital Audio G4. I've been able to use my G4 with iTunes and my Airport Express for quite a while. All of sudden iTunes no longer sees it. The Airport Admin Utility doesn't see it either. But I can still connect to the internet with it. What makes this even weirder is, I also have a MacBook Pro. The MacBook Pro has no problem seeing the Airport Express in the Airport Admin Utility and in iTunes.
    Any Help you can give is much appreciated.

    I can't offer any help. I am having the same problem except I have an Airport Extreme with the Airport Express acting as an extender. The only thing that works for me is unplugging the Airport Express and plugging it back in. Sometimes it is fine the entire day. Other times I have to do this multiple times throughout the day. I don't think this is a good, long-term solution. Any help anyone?

  • Will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard 753S Mobile Hotspot)??

    will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??

    Yes. There are 2 ways you could use these devices:
    Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
    Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible.

  • I have a 5 year old Dell PC and purchased the Airport Express last year.  After one of the iphone 4s updates I lost the contact and cannot reestablish.  I have even tried to hard wire from my router to the airport express and I cannot connect.

    I have a 5 year old Dell PC and purchased Airport Express last year.  I used my iphone 4s to connect and it has been working until recently I lost connection after one of the iphone updates.  I cannot make contact with the unit.  I have even used an ethernet cable that I hooked to my router and still won't work.  I cantinually get this message from Airport Utility.  An error has occurred and I can not do anything else.

    If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
    AirPort Utility - Manual Setup
    Click the Internet icon
    Connection Sharing = Share a public IP address
    Update
    You will probably get a message about a Double NAT error. Click to "ignore"
    This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
    Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

Maybe you are looking for

  • Using spool in a procedure

    Hi, I've a package with 6 procedures. In one procedure I need to load the data into a flat file. The procedure contains only one select statement. example: procedure pro_test as select * from emp; end pro_test; Shell script is being used to call one

  • Updating action type field in infotype 0000.

    Hi experts, I have to update the action type(MASSN)field and reason for action(MASSG)field in infotype 0000 for the existing record. I am trying to use function module HR_INFOTYPE_OPERATION to update it,but i am not able to update the action type fie

  • Duplex Printing in Crystal Reports

    Post Author: Razzle00 CA Forum: General Where can I get some information or sample code on how to duplex print with crystal reports?  Thanks, Razzle

  • Normal multiplication and division symbols in formulas?

    I want to use the normal * and / symbols instead of the × and ÷ symbols in formulas. I haven't used those symbols since I was in middle school. I have been using * and / for 30 years now. I have to conciously translate everything and it's annoying. 1

  • Regarding information about XI

    HI Gurus, at present one of my friend working in abap. At the same time he want to learn advanced topics. like XI or BIW. Plz give me some good suggestions for his better future. Thanks and Regards, Vamshi