I just installed a new WRT54G2 v1. It worked fine when I...

I just installed a new WRT54G2 v1. It worked fine when I installed it two days ago. However now it seems to be searching for ip address, and in a loop. I can correct it by stopping and restarting DHCP services, then repairing the wireless wireless connection. However, this is a real pain since there are two desktops and one laptop using it. Does anyone have suggestions. I have the wireless adapters set to obtain IP address and DNS automatically. Is this the problem? Should I assign static addresses to each? Just searching for a solution so I don't have to go through the repair each time the pc's start up. Appreciate any help. Thanks

I found at least part of my problem. On one desktop I found TCPIP V6, which, from what I have researched, is not needed - in fact, it causes problems on some networks. I unstalled it and the pc booted back up with active wireless Internet connection. I don't know if that was the only problem, but it at least temporarily solved that one.

Similar Messages

  • I have just installed my new final cut express 4 and when I try to import a photo it quits unexpectedly? Why is this?

    What should I do about this and does it need to be reinstalled?? Please Help??!!

    As you give no info about formats, sequence settings etc. and how you are actually trying to import it is impossible to guess.
    Please give  as much information as possible as there are countless configurations and permutations of settings you may be using.
    You could try trashing the preferences with this free app for a start  http://www.digitalrebellion.com/prefman/

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Just installed a new Airport Exteme.  Set up was no problem however we have  3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

    Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

    Well, this is interesting,
    Let me tell you coulpe of things I noticed:
    - Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
    - in some AP configurations (AP1 for example) I can see that:
    wlccp authentication-server client any method_Users
    This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
    aaa authentication login method_Users group Users
    This shows us that the method method_Users uses the server group named Users.
    let us see what is configured withe the group Users:
    aaa group server radius Users
    NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
    so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
    Check and let me know if that works.
    Regards,
    Amjad

  • Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit  battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...

    Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit  battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?

    Have a look at this help document for suggestions that you haven't tried yet:
    http://support.apple.com/kb/TS2570

  • I just installed the new mountain lion software on my iMac.  I was currently running Snow Leopard.  My problem is with my mouse.  Now when I scroll down the page it moves in the opposite direction. I checked system S.P. - Natural for scroll feature.

    I just installed the new mountain lion software on my iMac.  I was currently running Snow Leopard.  My problem is with my mouse.  Now when I scroll down the page it moves in the opposite direction. In system preferences I tried checking and unchecking Natural for scroll feature. Movement from side to side works fine.  Has anyone experienced this problem?

    I think this new scrolling behaviour was introduced with Lion. You do get used to it pretty quickly (well I did). Are you sure that deselecting Natural Scrolling in Mouse Prefs doesn't re-instate the previous behaviour, it does here.

  • I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Question
    I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.

  • I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes. Can anybody advise?

    I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
    I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
    Any advice would be helpful

    Hello Davedamoclese,
    Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
    http://support.apple.com/kb/HT1923
    Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
    http://support.apple.com/kb/ht1391
    You can download the latest version of iTunes from the below link :
    http://www.apple.com/itunes/download/

  • Hi i have just installed the new ver of i tunes and it says it cant read whats on my i phone and to restore it to factory settings..please help

    hi as above ive just installed the new itunes and it wont read the data on my phone

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Device Not Recognised 
    For PC  >  http://support.apple.com/kb/TS1538
    For Mac  >  http://support.apple.com/kb/ts1591

  • Just installed the new version of lightroom. It starts to launch and crashes

    Just installed the new version of lightroom. It starts to launch and crashes. Need help

    Could you please try to sign-out and in via the CC-app (preferences section) and afterwards restart Lr Desktop. A restart of CC-app alone would not solve your issue. Hope that helps. Guido

  • Just installed a new logicboard and OSX 10.4 Chokes on 10.4.10 update

    Just installed a new logic board on a 15" aluminum Powerbook g4. Followed all the steps on ifixit.com on how to do it and it went without a snag. It booted up and hurray! at least i thought so. Updated from 10.3.9 to 10.4 and installed and when i ran updates, the first one was 10.4 to 10.4.10....it decides to crash with that tinted screen saying I need to restart in 4 different languages. Go to do that and all i get now is the apple logo and it hangs...is it the logic board?
    Or, should i just reinstall? Bad HD?
    Thanks
    Message was edited by: italidesgin
    Message was edited by: italidesgin

    sorry i ment 15'' aluminium i some ow placed it in titanium topic.

  • I have just installed the new OSX Lion.  When opening Safari, there is now a very ugly sound.  What is it?

    I have just installed the new OSX Lion.  What is the ugly sound that I hear when I open Safari?

    See:
    *Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • When I update my Elements 2 to Elements 11, can I just install the new version?

    When I update my Elements 2 to Elements 11, can I just install the new version, or do I need to uninstall the old version first?
    Also, can I bring version 2 files into version 11?

    you don't need to uninstall your older version.
    you can migrate your catalog:  http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Maybe you are looking for