I just installed OS X Snow Leopard. I am now getting a prompt that the Flash Player (Safari Internet Plug-In) has failed. How do I correct this?

Go to Adobe's site and download the current Flash plug-in: Adobe Flash Player 11.6.602.155

Similar Messages

Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

I am IRATE that the flash player update just loaded several BS programs that I don't want. FAIL

Just got a mac air and started using it. after getting it set up i migrated files from my old pc. i did not realize that the files migrated to a different user account. how do i delete this user account and not lose the migrated files which i need

I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account. how do i delete this user account but not lose the migrated files?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

Just installed OS X Snow Leopard, and now Photobooth says I can't use the old version (2.0.3). How do I get the new version?

I just downloaded OS X Snow Leopard onto my early 2008 Macbook. I would like to be able to use Photobooth but it says I can not use this (2.0.3) version. How am I able to get an updated version??

For now just reinstall the combo updater. If this does not install Photobooth, then you will have to reinstall Snow Leopard or:
How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in
       the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go
       to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
          20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6.          Click “close”. Go to step 7.
Extract or Install........
7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9.          In the next dialog, click “Extract”.
10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11.          Type in your password, click “OK”
Pacifist will begin to extract files.
12.          In steps 8/10ß.... you also have the choice to “cancel”
Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
• Stop
• Leave original alone
• Update .....
• Default selection
• Replace .... (Replace option should only be used on full install packages)

I've installed the flash player update, but I don't know how to make it run.

How do you launch the new update on safari? I can't view any web videos.

Gmeanie wrote:
http://get.adobe.com/flashplayer/
Attention Mac OS X 10.7 Lion Users:
We are working closely with Apple to address a few known issues related to Mac OS X 10.7 and Flash Player 10.3. For a list of known issues, please see the following Knowledge base Article:
Flash Player
Flash Player may cause higher CPU activity when playing a YouTube video. This issue isossibly related to disabled hardware acceleration.
UPDATE: The final release of Mac OS X 10.7 provides the same support for Flash hardware video acceleration as Mac OS X Snow Leopard (10.6). The previous known Issue suggesting that video hardware acceleration was disabled in Lion was incorrect and based on tests with a pre-release version of Mac OS 10.7 that related to only one particular Mac GPU configuration. Adobe continues to work closely with Apple to provide Flash Player users with a high quality experience on Mac computers.
The Flash Player Settings dialog box doesn't respond to mouse clicks. As a workaround, press the Tab key to move to the Close button and press the spacebar to close the dialog box. While not all settings are available, you can also use the Flash Player native control panel in System Preferences.
Custom native mouse cursors don't animate properly on Mac OS 10.7.
G,
Thanks for posting that. It sounds like there was an issue, it only involved one type of setup, and they list a work around for it. I'm running the latest version of Flash without issue on 10.6.8.

Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported." I just installed Mac OSX Snow Leopard. What do I need to do?

I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

I just installed mac osx snow leopard in my iMac. windows freeze and unfreezes.

Help needed again. I just installed mac os x snow leopard on my imac. sometimes when I open a window it freezes and then suddenly unfreezes until the next time. the tool bar does not identify what program is opened when frozen. It says finder instead
Thanks for everyones help. It has made a huge difference. I hope this is the end of my issues with this new OS.

Have you run Software Update several times to ensure you've picked up all available updates after upgrading to Snow Leopard?

HT1926 just installed latest itunes to my pc, but now getting this message' the file itunes Library.itl cannot be read because it was created by a newer version of itunes. and now i cannot open itunes?

just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

I have installed Firefox 4 twice, and each time I get a message that the file is corrupt and can't be opened.

I ordered a download of PagePlus X5 from Serif in the UK. The program is 706 MB. Several times, only 300+ MBs downloaded. The program had .exe but the partial download had .msi. The message that came up was "Setup was unable to find the msi package or patch . . ." Serif suggested I install Firefox as a web browser to see if the program would download. That is what I tried to do, and that is when I got the message that the file was corrupt. Serif is sending me a disk. Is there a disk for Firefox?

How large is your iPhone's storage? 16GB, 32GB, or 64GB? You can go to Settings > General > Usage, and that will tell you how much storage you have used and how much you have left. If the storage is truly almost full, then you would need to either delete files from your iPhone, or sync less files from iTunes to your iPhone.
Hope this helps!

Can't install the Flash Player for Internet Explorer

Hi.
Today, I started noticing my videos were stuttering a lot (something that doesn't usually happen on my computer) and I thought my Flash Player was glitching out, so I uninstalled it and deleted the registry keys for it via Iobit Uninstaller. I restarted and then re-downloaded the player.
The Firefox/Chrome/Opera etc. version installed smoothly and now works perfectly fine. In the case of the Internet Explorer installer, however, it says that a newer version of the player is already installed.
I'm using Windows 8 (64-bit) and IE10; from what I've been reading, IE10 comes with a pre-installed Flash Player. The problem is I don't seem to have it anymore. It doesn't show up in my IE Add-on list (http://i.imgur.com/mkm4JQf.png) and whenever I try to watch a video or something that requires Adobe Flash Player, it says I need the player.
Things I have tried so far:
downloaded the Adobe Uninstaller to uninstall the Player and then reinstall it;
checked if ActiveX Filtering was enabled (it was not);
reset IE settings to default;
installed Adobe Flash Player beta (it wouldn't let me; it said my Windows came with the latest version of the player);
ran the 32-bit version of the browser;
checked for possible Windows updates (it's up-to-date);
tried to downgrade the browser, without success (the IE10 update doesn't show up in my Control Panel's updates uninstallation screen);
tried to run System Restore (it failed; it said my antivirus had to be disabled, and I did, but it still wouldn't restore).
Normally, I wouldn't really mind it, since I don't even use the browser directly; software I'm using, however, requires IE (and its Flash Player) to run.
Thanks in advance.

http://forums.adobe.com/thread/1195540

I have installed my lexmark x1100 printer to macpro but it keeps telling me that the ink pots are wrong and they are not how can over ride this issue please help

I have installed my lexmark x1100 printer to my macpro lion but though it registers its there it keeps telling me that the inkjet pots are not in position or wrongly inserted, how can I overcome this problem which is driving me crackers!!!!!

Thanks for the additional info. If the printer works using your Dell Laptop, then the printer is working fine. The problem is with the driver. The Lexmark X1100 is only compatible up to Mac OS 9.2.2. If you have the Mac OS X, unfortunately, it's not compatible with that OS.
You might want to consider purchasing a new printer - preferably a network printer since you have multiple computers. We do have printers that are currently on sale online. You can check it out here: http://bit.ly/KQBDe0
Those printers are compatible with the newest Operating Systems both for Windows and Mac. It also has drivers for Linux.

Not responding whenever computer is restarted. I have to uninstall and re-instal Adobe Flash Player every day and it works. How do I fix this?

It works until I restart the computer. I have tried every suggested fix I can find including:
Updated - latest version installed
Re-installed Adblock +
Drivers up to date
Acceleration is on
Reset Firefox
Malware Bites Pro runs continuous
Safe Mode
How do I send the crash reports?

Basically, the script wrapper solution is: Firefox launcher gets changed to run a script, which in turn starts Firefox and also jumps through whatever hoops you need to fix the problem. Not a pretty way to do things, but if the problem is indeed in zombie processes and/or junk data in local cache, this will do the job. So, instead of running '''''YourAppPath''/firefox.exe''' it would run '''''YourBatchPath''/firefox.bat''' that contains something like this:
* ''YourAppPath''/firefox.exe
* [http://technet.microsoft.com/en-us/sysinternals/bb896683 pskill] -t ''YourFlashPlugin''.exe
* del ''YourFlashCachePath''/*.*
Of course, you'll need to do this manually first - take a look with Process Explorer at what processes FF launches and which of them fails to terminate and locate the cache (where Process Explorer / Process Monitor also helps), mop them up and see whether it helps.
If you're not used to this sort of things, show this message to someone who is, it will take a few minutes to either have it done or disprove my hypothesis about your bug (not likely, as it's rather typical, and FF sometimes manages to half-zombify itself even in Linux).

I have an old version of Logic Pro 8 installed on an MAC air. I now need to migrate to my new iMac but I lost my CDs. How can I accomplish this task

I have purchased a new iMac and I have an Logic Pro version 8 installed on my Mac air. Can someone tell me how to migrate it to the iMac since I misplaced my CDs.

You should be able to hook the two up and run the migration assistant app to transfer all apps to the new machine.
Mike,
I do agree with you... that you *could* do that but the issue is the large number of reported problems, here and elsewhere, by people trying to use MA with Logic.... resulting in them having to re-install Logic and it's content, from scratch anyhow.. negating the use of MA to achieve this..
I also believe, though I have no proof of course, that based on previous similar situations on the App Store, there will be no discount for recent purchaser of Logic 9 when the next major version of Logic is released... but then again, the current price of Logic 9 is the same price as the Logic 8 to Logic 9 upgrade price was anyhow.. so in reality, for me at least, it would be reasonable to pay that same price for the Logic 9 to Logic <whatever> anyhow!
Cheers..

I just installed OS X Snow Leopard. I am now getting a prompt that the Flash Player (Safari Internet Plug-In) has failed. How do I correct this?

Similar Messages

Maybe you are looking for