I just installed PSE12 and it opens for 1 second and then closes.  Is there a fix?

I run Windows 7 64 bit.    I have tried some of the solutions on the forum but nothing works including running as administrator.

It's me again. The problem seems to be mainly with the Microsoft Web App that I use to access my office email through Safari. (Although it seems many programs now run slower with Yosemite.) Safari is the only browser I use--would IE or Firefox be more stable? If I can't solve this problem, can I un-install Yosemite? None of the new features are of any use to me, and this persistent problem is really annoying.
JayBdc

Similar Messages

  • HT201407 iTunes on my phone will come up and then close, how do I fix it?

    iTunes on my phone will come up and then close, how do I fix it?

    Hello Bull Powell,
    Thank you for using Apple Support Communities.
    It sounds like your iPhone appears in iTunes for a split second, and then disappears.
    I would suggest the troubleshooting outlined in this Troubleshooting Assistant named:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    I suggest restarting the iPad with step 2 and work your way down from there.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Regards,
    Sterling

  • Everytime i try to open an app it stays open for a few secs then closes. this happens to every app

    Everytime I open an app is stays open for a fews seconds then closes. this happens to every app and eveytime i try to open one

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Next try downloading/installing a free app.  Others have said that works.

  • Every time I try to open an app it opens and then closes. how do i fix this?

    how do I fix my ipad that closes the apps  right after opening ?

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

  • Hey gang, since upgrading to iOS 6 my unlock swipe stays frozen for several seconds longer than normal, is there a fix?

    Since upgrading my ipad to iOS 6 my unlock swipe key stays frozen for much longer than before, is there a fix?

    First try Resetting it: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.
    If that does not work restore it from your backup in itunes.

  • When I try to open a downloaded PDF file it opens for about 6 seconds and then closes - how can I fix that?

    I am using a Dell XPS8500 desktop with 64 bit Windows 7.
    No problem downloading PDF files but when I open them they disappear before I can print.

    Hello,
    Which application are you trying to open the PDF files in? Firefox or Adobe Reader? Or another?
    If adobe reader then please make sure that your copy is up to date. You can get the latest version here - http://get.adobe.com/uk/reader/
    Also I notice that you are using Firefox 19. Unless you have a particular reason to run an old version of Firefox is it much better to keep updated. The latest version is v22. New security fixes are applied in every new version of Firefox. Without them your PC is vulnerable. Please see this article: [[Update Firefox to the latest version]]

  • When I open iTunes, it opens for about a milisecond, then closes.

    As in the title, when I open iTunes on my Dell computer, it closes before I am able to do anything. It was working fine one night when I logged off and the next morning it was not working. I have tried re-installing, and changing firewall ports, and nothing seems to work. I tried reverting to an earlier version and the same thing happened.
    This same problem occurs if I try and open any Quicktime application. Could someone help? Thanks.

    Sounds like you have that nasty malware going around.
    Scan your PC with ewido
    www.ewido.net/en/

  • IPad mail opens with blank white screen and then closes since returning from overseas. Worked fine up until then.

    Since returning from overseas my iPad mail does not work. Selecting mail opens a blank white screen which stays open for a short time then closes. No functionality is available during this time. Doing the normal reboots etc does not resolve the problem.

    Have you tried to go into the settings, mail, contacts and calendars and removing then re-adding the account info?

  • I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

    I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

    When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

  • ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "An error occurred when attempting to change modules".  It won't import photos and has no side panels under Library.  What should I do?

    I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "An error occurred when attempting to change modules".  It won't import photos and has no side panels under Library.  What should I do?

    I Nearly bought from Amazon too but I found a thread from Adobe stating that the only recognized outlet for lightoom is themselves and other outlets serial numbers will not be guaranteed.
    THat at was sufficient for me to buy direct from Adobe, hope you get it sorted.

  • Just installed Lion and iCloud. Now I'm not able to open the Mail program. What's the problem? Thanks. Andrew

    Just installed Lion and iCloud. Now I'm not able to open the Mail program. What's the problem? Thanks.
    Andrew

    Dear Ralph, thank you for your lightspeed answer!
    When I had installed the app, there was been written: "open", and when I pushed this, NO reaction of the iPad! And crazy too: I am NOT able to find the app itself at any screen of the iPad!!! I can see it only in the list "bought" items. With other words: The app is neither to be seen nor I am able to open it in the "list".
    Thank you in advance for your advice
    Best greetings from Austria (Wien, Vienna)
    Wiener Schnitzel

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What shou

    Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
    I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
    HELP!!!! Please.

    No, what you're experiencing is not normal.
    Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
    Call back,
    Clinton

  • I've just installed Maverick and now can't open iPhoto. I have 9.2.1 currently installed. Am terrified I'm going to lose photos as they weren't all backed up. What do I do? Please help...

    I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.

    Pogs78,
    first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.

  • I have just installed Lion and the text window for the web address in safari has disappeared.  Anyone know how to get it back?

    I have just installed Lion and the text window for web addresses in safari has disappeared.  Any ides how to getit back?

    Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.

Maybe you are looking for

  • XSLT extension method in bpel

    Can someone please tell me how to extend the existing xslt file. I have a scenario where in customer will add new fields(as a ADF flex fields) and that will be taken(appended) in an xml file(will be added in EO and exposed as a service to BPEL). Now

  • Killing JFrames in a JFrame

    Hi, I have a few JFrames popping up in my program with GUI stuff in it, what i want to do is to use the 'OK' / 'CANCEL' buttons i put in the JFrames to work, i.e. 'Cancel' should kill the internal JFrame and 'Ok' should do something with my inputted

  • Ctrl command

    i want to send command Ctrl +W using labview on serial port. how can i use it? When i am sending this command on hyperterminal it gives me responce please help me falgandha

  • HTMLB Dropdownlist not retaining the selected value

    Hello, In my BSP application , in my Dropdownlist when i select an entry it doesnt get retained in the view. Please suggest I have implemeted DO_HANDLE_DATA AND DO HANDLEEVENT> but still it doesnt retain the selected values. Please help thanks swati

  • Adobe in GP

    Hi All, Need some advice here. I have a Adobe interactive form (this is the first step of the process) and i need to prefill it's content from an external service. I have created an external service Callable Object which calls my backend RFC. This is