I just installed Windows 8, but iTunes is nowhere to be found when I plug in my iPhone. What do you advise?

How do I get iTunes to open in recently-installed Windows 8? Thanks

Howdy BooDiggly,
Thank you for using Apple Support Communities!
It sounds like you freshly installed Windows 8, and now need to load the iTunes software. You can download it from this website.
http://www.apple.com/itunes/download/
When its downloaded, install the file, and you should be good to go.
All the very best,
Sterling

Similar Messages

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

Just installed windows 7, but doesn't take my password?

just installed windows 7 using bootcamp, but now trying to log into windows, it wont take my password which i know is right.
anyone else run into this problem? it wont let me reset the password either

Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp

I need to be windows compatible and I downloaded windows templates but people still don't seem to be able to open my documents, what have you done?

I am new to the mac, and I am trying to get compatible with Windows. I need to be able to receive and send window items, that i and others can read and work on. Can anyone help?
Thanks
Andrea

I assume most of the documents you need to transfer and edit are MS Office derived.
Well there are several options for you to consider
Use the Apple productivity suite iWork although this will open .doc and .xls allow you to edit and export them again in the same formats some formatting and font issues are common place when transferred between native MS OFFICE programmes and Pages applications.
You can try the fee open office suite or neo office ( a version of the same)
These are more familiar in work flow to MS Office and allow saving to .doc .xls and .rtf plus .docx and xlsx.
Or you can buy and install MS OFFICE for MAC2011 which includes a version of Outlook in the full (expensive) package that can be set up with an Exchange server for e-mail and contacts and calendars, and also POWER POINT.
Oh and you can also use the built in Mac text editor to view edit and save as .doc as well.(Its not feature rich ) but it works for simple documents.
If you are using the Mac Mail application to send/receive e-mail with attachments from/to Windows , make sure you have set it to send windows friendly attachment.
To do this open Mail, click on Edit in the Menu bar (Strip at top of screen), scroll down to Attachments and click on the small triangle to the right. In the pop out window click on the Always send windows friendly attachments (A tick should be added to confirm done)
If sending documents to anyone that are to be read only best to print as a .PDF to fix font issues and formatting (these can also be secured with a password).
If you need more complex print editing or image manipulation tools they are also available (at a price) from the likes of Adobe,and design tools such as CAD Vector works/Turbo CAD are also available.
You can also setup complex and secure Windows compatible Networks.
Finally if you absolutely have to view/access some windows specific software for instance a MS Access data base well you could install something like Parallels/Fusion/Virtualbox with a copy of Windows right on your Mac.
Or even use Bootcamp with a copy of Windows (full) on a separate partition.
These days your Mac is very windows compatible.

I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks

I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks. Sven

Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks.
Sven

Problem solved. Copied latest file of iTunes Library.itl from Previous iTunes Libraries and replaced it with the original in Music - iTunes-folder.

Just installed windows using bootcamp..... Explorer works but safari doesnt

Like it says i just installed windows using bootcamp. I booted into mac and airport is connected to my wireless signal but when i open safari it says im not connected.. i ran diagnostics but it said it could fix the problem and to contact my provider... however i decided to check and boot into windows and lo and behold i have a fast active internet connection through the wireless signal... what the heck is going on ?

also the mac wireless has worked on every other wireless network ( my school , my home) but it wont work at my office even thought the windows side will connect wirelessly... what gives?

Just installed windows 7 on my macbook (os x snow leopard) using bootcamp. I can't get back to my mac now. I've tried logging off of windows and shutting it down. when i restart it comes back on in windows. How do I get back to my os x?

Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp. Windows 7 works great, but I can't get back to my Snow Leopard. When I log off or shut down Windows and try to start up again, all I get is Windows. How do I get back to my mac operating system?

If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes.

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes. The hard disk was replaced recently in order to gain extra memory. Is there some sort of limit set up from the original hard drive causing this problem?

Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
Once this process has been completed restart your computer.
Utilities & info regarding checking your HD space:
Where did my Disk Space go?
Slimming your hard drive
Seven ways to free up drive space
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Disk Inventory X
WhatSize
SpaceControl

After downloading and installing the 64-bit version of iTunes for Windows I get a "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone to synch it I get a message that says that I don't the 64-bit version??

After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed. Run the installer to remove iTunes, then install the 64-bit version of iTunes". I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties). Same result each time!!! Any ideas????

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

I just installed windows 8.1 and it wouldn't work

What do I need to do to get iTunes to work again. Since I just installed Windows 8.1. This is stressing me out try to get it work. HELP!!!

That's awesome wonder!
Hey, I haven't experienced any problems with flash player square yet. Is it to "experimental" for the official repos? I've tested many flash sites and have yet to crash the browser. I think most users will not mind it in the official repos.

I have just installed Captivate 7 but I can't get Help to load, any ideas?

I have just installed Captivate 7 but I can't get Help to load, any ideas?

Hi hazelplt,
When you say you can't load does that mean Captivate does not launch?
Try launching the application as 'Administrator' and check.
You might also want to check by launching it in 'compatibility mode' and see.
In case you still face issues, try resetting Captivate preferences and then check by launching the application.
To reset the preferences, please follow the steps below :
Close Adobe Captivate.
Locate the preference folder:
Windows Vista and Windows 7: C:\Users\[user name]\AppData\Local\Adobe\Adobe Captivate 7 folder
Rename the Captivate folder.
Restart Adobe Captivate. A new folder is automatically created.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

When I open iTunes, this window pops up. "A required component is not installed. Please reinstall iTunes. (-42076)" I have not been able to sync my iPhone after restoring it. Can anyone help?

When I open iTunes, this window pops up. "A required component is not installed. Please reinstall iTunes. (-42076)" I have not been able to sync my iPhone after restoring it. Can anyone help?

Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.

I just installed Windows 8, but iTunes is nowhere to be found when I plug in my iPhone. What do you advise?

Similar Messages

Maybe you are looking for