I just loaded my new IPhone 5 to Itunes and now my ipod will not sync
How do I sync playlists to my old classic Ipod now that Itunes switched me to a new display from my IPhone 5?
Hi denise mfrompalatine,
If your iPhone won't turn on, try the steps in the resource below:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Hope that helps ...
- Judy
Similar Messages
-
I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I get it to re-start?
Hi denise mfrompalatine,
If your iPhone won't turn on, try the steps in the resource below:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Hope that helps ...
- Judy -
I downloaded the new version of iTunes and now my iPod will not open in iTunes
I recently downloaded the new version of iTunes and not my iPod will not open in iTunes
Hello, srg60.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
Installed new itunes and now my ipod will not connect?
I installed the new version this morning and now my Ipod connects for a few seconds then ejects? very frustrating.
Hi atollmedic,
Welcome to Apple Support Communities.
It sounds like there is an issue with your iPod being recognized since updating iTunes. The article linked below provides suggestions that will resolve most issues like the one you described.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
I hope this helps.
-Jason -
As the title says really. I deauthorized my old computer and therefore i thought that would mean i could sync my ipod, when i authorized my new one but it won't sync to my library on this laptop. why?
Before you start, remember that connecting to a new iTunes library will erase your device during the first sync.
Here's how to save your data and settings: How to back up your data and set up as a new device
After that you can connect it and set it up again. If it is not recognized in iTunes, follow this article: iOS: Device not recognized in iTunes for Windows -
I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?
Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone -
I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.
Try the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I just downloaded the latest version of iTunes. Now my iPad will not sync. I get the message: "This iPad cannot be used because the Apple Mobile Device is not started." What do I do?
Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
I have moved my itunes to a new computer and now my ipod will lnot sync with new line up
i have moved mu itunes to a new computer and my ipod will not sync with new music.
If you are using automatic syncing, you may need to set up the iPod's Music tab in iTunes.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Select Music there. This is the Music tab, where you tell iTunes how to sync the iPod with songs. Sync Music is checkmarked for automatic syncing.
If your entire iTunes music library can fit on the nano, you can choose to sync Entire music library. Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Then, create your selection of songs below. For example, if you want to keep it simple, create a new playlist in iTunes. Put ALL songs you want on the iPod on that playlist, including songs from the newly added music. Back on the Music tab, find and checkmark that new playlist under Playlists.
When you click Apply, your selection of songs on the Music tab syncs to the iPod, replacing its current content. Going forward, any changes that are related to the Music tab settings sync automatically when you connect the iPod, or when you click Sync. So, if there is a playlist with your "iPod songs," you can just update that playlist (add and remove songs) whenever you want; iTunes updates the iPod with the same changes at the next opportunity. -
I just recently downloaded the newest iTunes and moved all my purchased and already owned music to another PC. Every since I did that I cannot get my iPad 1 to even be recognized in iTunes. I have Authorized the PC in iTunes, but my iPad still will not allow me to sync. I'm at a loss...PLEASE HELP!!!
1. You need to authorize iTunes on the new computer with your Apple ID.
2. Make sure you turn off auto sync in iTunes
3. Connect your iPad to iTunes via USB and when it is recognized, right click on the device from the Device list on the left of your iTunes page and choose transfer purchases.
4. Once purchases are transfered and you have authorized the iTunes account, you should be able to sync. -
I recently downloaded the latest version of Itunes. As soon as that was finalized, my Ipod stopped showing up on the screen when I was in Itunes and I can't sync new songs and audiobooks to it. How do I get my Ipod to work again? It charges up and plays just fine, it will not sync or update with Itunes. There is nothing showing on Itunes that I can manually sync it, either. That option can't be clicked on. I have no other devices other than the Ipod that syncs with Itunes now, I used to have an Iphone, but I don't anymore
Hey melthepest,
Thanks for the question. I understand that your iPo classic is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iTunes reports that "iTunes cannot recognize this iPod at this time"
http://support.apple.com/kb/TS1416
Thanks,
Matt M. -
I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x. You have iphoto 9.2.3.
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT -
I just updated to the new Itunes and now my phone will not connect to my computor.
I updated to the new Itunes and my Iphone will not connect to my computor now?
Hi kevin n tracey,
If you are having issues with iTunes after an attempted update, you may find the following articles helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?
Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car. -
I installed the new iOS 7.1.1 and now my iPad will not charge like it used to before the update ?
What can be done to fix this ???
Once I did the update it will not charge as quickly as it used to I mean like could be on the charger all day and not reach 100% and my friend has an iPhone 5 and she had the same problem the charger isn't broken and nothing is wrong with with place on the device for the charger she had to end up getting a new charger but I'm not buying a new charger when this was not my fault
Maybe you are looking for
-
Error when importing EPS files in Publisher 2010
Whenever I attempt to insert an EPS file (possibly other image types as well) into a Publisher document I get a prompt asking for what type of file the source is and then this error: "An error occurred while importing this file." This is running as a
-
Structure or field where serial number is stored, while saving delivery
Hi All When user will create an OB delivery ...he will enter the Serial Number of the Materials and then user will hit PGI..... before the document get saved i want all the serial numbers that user has entered....and i want to process them....those s
-
Custom Auth. Object with Profile and role assignment not working
Hi, I have created custom Authorization Object with field ACTVT with allowed values - 01,02, 03. Now test it with custom program using AUTHORITY-CHECK OBJECT 'Z_AUTHORIZ' it is working fine and returning sy-subrc 12. At this point i have not created
-
Hi all, To make server's installation faster, I intend to make an updated "install.wim" every 6 months using DISM. Then, after installation, the Win2012R2 server connect to a WSUS server to get the latests update not included in the install.wim. As a
-
Can't change Lenovo default audio format
When I go into the Realtek manager, it says it's at 16-bit 48000hz, but I need it at 41000hz, because my audio has been dropping out. However, the menu is greyed out, and the eraser button to the left doesn't do anything. Could somone help please?