I just loaded the 8.1 operating system on my iPad.  It has been sitting for about 4 hours with the black screen and white apple with the bar underneath.  What should I do?

I am having trouble after loading the 8.1 operating system on my ipad.
My iPad is model A1397 EMC 2424
MEID ********
Serial DL******JHH
64GB
I started loading 8.1 about 5 hours ago and it is still sitting with the black screen with the progress bar underneath.  It shows that it is almost done loading - just has a tiny bit of the progress bar left.
<Edited by Host>

I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything.  I thought I was doomed.  I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now.  I can't say I recommend this, but it worked for me.

Similar Messages

  • HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

    Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    I'd gather by your "reset Safari"  and "clean up" you mean by sites you rather not have your mom see.
    Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find first, but need to reinstall Flash again here
    http://www.macupdate.com/app/mac/11076/easyfind
    http://get.adobe.com/flashplayer/
    OnyX run All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
    http://www.titanium.free.fr/
    CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
    http://www.piriform.com/mac/ccleaner
    Every web site knows your apx location.
    http://www.whatsmyip.org/more/
    To be sure to have a clean machine, a
    Restoring OS X - 10.6  "fresh install method"
    Restoring OS X - 10.7 - wipe and install
    is the only way as you only bring files back to the machine that you know what they are, everything else is removed.
    https://discussions.apple.com/message/16276201#16276201

  • My iPhone 4 has been dead for 24 hours and it has been charging for 12 hours. I have tried holding the home and lock button down but it still has the black screen, what is wrong with it? It just randomly died on means won't turn back on

    My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.

    Hi Lauren,
    When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • The latest update has been running for 16 hours. Is that normal.

    The small window has been showing for 16 hours. It says downloading the update, and connecting to the server and it has the bar running across. How don I know when it is complete.

    Not normal. You probably got a bad connection, but the update is not what you want. You are so far behind at Firefox 3.6.10 that even if the update worked you would still probably have to do more updates. With Mac OS X 10.4 you cannot go to Firefox 4.0, but you will want to go to the latest 3.6 version which is 3.6.17
    Start at http://www.mozilla.com/firefox/all-older.html ''(those with current systems can upgrade to 4.0.1 at http://www.mozilla.com for 4.0.1)''. At the completion of the download don't let the setup start Firefox for you, when the setup ends, start Firefox in your normal manner this way you will be less likely to create a new profile.
    The extra startup pages are temporary -- read them. The next time Firefox comes up you should be back to starting with your normal home page.
    Note: Firefox must be down once the install starts.
    Close Firefox with File>Exit. Then make sure Firefox is not running --
    On Windows: check the "Processes" tab in the Windows Task Manager.
    On Mac: Firefox > Quit then Command+option+Esc, if Firefox running use Force quit
    Permission errors on Mac:
    If you were getting permission errors on a Mac, download the latest
    Firefox version (for your system), then uninstall and reinstall Firefox. Do not remove your profile directories and files as they contain your settings,
    bookmarks, history, extensions, passwords, and cookies.

  • Equium - Black screen and cant reboot with the recovery disc

    I have a black screen and cant reboot with the recovery disc but I seem to be getting nowhere.
    I find it strange I cant ask Toshiba direct about my problem but I have to wait for a kind hearted person to solve my problem or give me a helping hand

    Of course you can ask Toshiba. Toshiba has Authorized service providers worldwide and I hope some of them are in your country too.
    So please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download > Find an ASP and contact nearest service provider. Just explain the situation and I hope they will help you.
    Back to your problem:
    It is not easy to say why this happen. The whole issue is not described so well and I am missing some important points.
    Maybe you have upgraded RAM and now notebook doesnt start properly. It is also possible that CPU is defective. It can be so many different reasons for this.
    Best thing you can do is to contact service and ask for help. they can run diagnostic tools and find out quickly what the problem is.

  • How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    Apple - Support - iTunes - Contact Us

  • Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing what can i do???

    Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing. What can i do???

    This may provide the answer:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears

  • All my downloaded(digital copy) movies will no longer play in itunes, i get a black screen, and no sound, but the time keeps going. how can i fix this?

    All my downloaded (digital copies from dvds) won't play in itunes. I get a black screen and no sound, but the time keeps moving. How do i fix this?

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • My iPad has been syncing for 18   hours since I am trying to do the iCloud thing.  What happens if I stop the back up process? Getting tired of waiting for it to get done.  Could this be caused by the fact that I have 5gb of photos on the iPad ?

    My  iPad has been syncing for 18 hours / back up process since I tried to work with the iCloud.  Some items ie., contacts are synced to my new iPhone 4si and also books from the app store and also kindle stuff is okay.  No photos yet.  iPad has 5 gb of photos on it.  What happens if I stop the back up/sync process before it completes? Does it mess up my iPad??? Thanks

    Delete your old Firefox Profile and create new one
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    Backup and Restore your profile data's
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Profile_backup

  • I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
    http://support.apple.com/kb/ht1661
    http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
    http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

  • HT4718 am trying to install OS X Lion for the first time. So far it has been downloading for about 2 hours. How long should it take?

    Can anyone help please?
    Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?

    1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
    5.1851xxx hours.
    I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
    So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours.

  • The iOS 8.0.2 has been downloading for an hour on my iPad, is that normal?

    The iOS 8.0.2 has been downloading for an hour on my iPad, is that normal?

    Yes. Your product list shows that you're currently running iOS 7.1.2, and whenever you make a major update, i.e. iOS 7 to 8, it's a large file which can take a while to download.

  • My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

    My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

    No.
    You cannot.
    Sorry

  • HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

    How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

Maybe you are looking for

  • It seems mapproxy servlet does not work in 11.1.1.2

    Dear Masters, I used mapproxy?rtarget= to access mapviewer in JDeveloper 11.1.1.1 and everything was OK but when I switched to 11.1.1.2 mapproxy servlet does not return anything. Is there any changes about mapproxy servlet? Regards.

  • Passive or active VGA-splitter for Mini?

    I would like to mirror my Mini display with VGA-input to a 32 inch LCD-TV with VGA input. Should I use a passive or an active VGA-splitter? mac mini   Mac OS X (10.4.8)  

  • Reducing KB size of multiple photos

    This isn't really an iPhoto question, but if I have a file of photos that are all 2.5KB each or whatever and I want to reduce them all by half, is there a way to do this other than photo by photo? THanks

  • What is the difference in the features between Cisco prime 1.2 and Cisco prime 1.4 ?

    Dears, Please i need to know what is the difference in the features between Cisco prime infrastructure 1.2 and Cisco prime 1.4. Already i see the release note for each one but the release indicate only the New feature for every one. so i need to know

  • 411 calls that you did not Make

    I recently went through over 4 Verizon customer support Representative on getting 411 calls taken of my bill.  Verizon told me twice rgey would do it and thety never dis, Then I worked with Duane (removed) at (removed).  Duane came back and said they