I just loaded the latest update 3.6 and when I open Firefox it freezes if I click on anything. Help
Mozilla Firefox flashed that an updated version of Firefox was available so I selected to update. It went through the update process without any errors. Now when I open Firefox and select any action, Firefox freezes and shortly displays Program not responding.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Similar Messages
-
i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly
Same problem with the update, and iTunes can't find my device. I've spent the last two hours researching this and trying everyone's ideas to no avail. I hope someone comes through. Super frustrating :////
-
I just loaded the latest version of itunes and now I cannot sync my notes from Outlook 2010 to my iphone. Notes no longer appears under the advanced section of the info tab. Since I have not had luck syncing in the cloud I always check the boxes and tell the sync to sync from my computer to my phone. Does anyone know how to get this to work.
When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod -
When requested I tried to down load the latest update for itunes and now I cant open itunes as it says Ive lost the MSVCR80.dll file and I don't know how to repair it.
I've tried re-installing as the error message instructed but that hasnt worked.
Can anyone help?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I downloaded the latest version of itunes and when i open it it crashes a short time later
After downloading and installing the latest version of itunes to my computer when I open itunes it would crash within 30 seconds. I uninstalled and started from scratch and downloaded the full version, but when I open it, it crashes within 90 seconds. What the heck is wrong?
Uninstall all components, delete the named folders and reboot as set out in the second box of Troubleshooting issues with iTunes for Windows updates then reinstall.
tt2 -
I just got updated a week ago. Since then,when I attempt to send a photo by email the keyboard box won,t come up for me to type in an address.Whats the problem?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Just added the latest update, now the mini wont boot, any ideas?
We've just added the latest update to the mini, now all we get is the Apple with the working logo, does anybody have any ideas what to do next?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
-
i have just downloaded the latest update for Pages on my iPad and now it can no longer open up documents in iCloud and then just shuts down. What The.
Before the reset quit Pages like this:
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. -
My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
I can't use the phone now its frozen in this screen.Hello, Indy car fan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have just installed the latest update - IOS 7.0.4. Prior to this, my AOL email worked fine. Now it gives an ID/password error message. However, everything is fine on my Windows computer. Any thoughts?
Hello there, Tim.
The following Knowledge Base article provides some good troubleshooting steps for working on resolving your issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Pages died today. Just downloaded the latest update 2 days ago. Last night shutting down my very new MacBook Pro Retina, Pages stopped shut down. Today Pages will not open, all my Pages docs cannot open. Help please! Anybody have a fix?
You probably have 2 versions of Pages on your Mac.
Pages 5 in your Applications folder, will open Pages '09 files but will alter/damage them. It can not open Pages '08 files.
Pages '08/'09 in your Applications/iWork folder which can not open Pages 5 files.
When you were shutting down you probably had an unsaved document open.
You probably are opening the wrong versions of Pages to open the wrong document format.
Pages 5 has had over 90+ features removed.
Most users are going back to Pages 09 whilst Apple sorts this out.
Peter -
Just installed the latest update and now I can't open e mail attachments on my iPad and I phone 5s
just installed the latest update and now I can't open e mail attatchments on my I phone 5s and iPad 2
Try re-installing the big 10.6.8 Combo...
http://support.apple.com/kb/DL1399
Repair Permissions afterwords, reboot. -
After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Oracle 10g rac installation on IBM power server
Dear Gurus, I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue. OUTPUT from Installation log: INFO: Start output from spawned process: INFO: INFO: INFO: /oracle/app
-
Hi all. Update my iphone 4S via usb last night. Since then the iphone is not visible in itunes for wireless syncing. The sync wirelessly box is checked and is viewable as checked when phone connected via usb. Anyone else have this problem and bee
-
My computer hard drive crashed. I was able to back up the entire drive and am now in the process of recopying everything back. Is it possible to find all my email and restore it as it was before? Your help would be greatly appreciated. I had extensiv
-
Explode document distribution list / organisational unit
I have configured document distribution. I am able to send mails through document distribution. However, I want to send mail to a group of users. Hence I have created an organisational unit with different positions and I have captured the e-mail addr
-
Read multi tiff and apply rhreshold value in all page
hi, Am using JAI i read multi tiff.and Its istored in Buffer.I am trying to apply threshold value to each page, i got error.(i cant apply threshold in 4 band) How to apply threshold in each page. give some sample code. regards siva