I just moved and Time Warner gave me a new modem and router (Motorola surfboard 6580).  Can I now use my airport extreme in the bedroom to extend wireless signal?  If so, how?

I just moved and Time Warner gave me a new modem and router (Motorola surfboard 6580).  Can I now use my airport extreme in the bedroom to extend wireless signal?  If so, how?

Can I now use my airport extreme in the bedroom to extend wireless signal?
Yes, if you plan to connect the AirPort Extreme back to the Motorola modem/router using a permanent wired Ethernet cable connection.
No, if you were planning to have the AirPort Extreme extend the Motorola signal wirelesssly.

Similar Messages

  • How do I restrict wireless network access to specific devices/computers, using an Airport Extreme, when the WPA2 password is able to be found by other devices?

    I have set up a wireless network in my office using a couple of Airport Extremes, and, for some reason, our Windows computers are able to view the password of the network. Well, given that we employ teenagers, you can imagine what happens when they all find out the password. We want to restrict network access to only those devices we deem necessary. How do I accomplish this?

    SidMed wrote:
    We need 18-20 devices to access, all wirelessly.
    You can keep using your Apple routers as AP devices.. but get a router running a secure OS as the actual router that controls the network..
    If you have 18-20 teens on the network.. then setting quota and restrictions on bandwidth is far more important than time..
    Gargoyle on a cheap router can do it.. eg WNDR3800 or the newer W1024ND v2.
    Simply turn off the wireless in these devices.. and use the ethernet connection to the airport as WAP.
    Honestly you just will never get the security or control using apple domestic routers.

  • My contacts keep getting wiped out and i have to reset my origional settings. this has happened 6 times. they gave me a new phone and still happens!! now what?

    I have had to reset all settings on my iphone 4 because my ablums and contacts keep getting wiped out. not all the contacts.. just the ones ive put in iin the last few months.  this is irritating

    a-singh wrote:
    why dont you put all of your contacts on your sim card ? then if they do get wiped then you can transfer them from your sim to your phone but this is just a way to speed up the process
    Not possible.
    The iPhone does not save contact information on the sim card.

  • I backed up to the cloud and then Apple gave me a new phone which was IOS6.  How do I restore from Cloud to my new phone which I have just updated to IOS7 please?

    I backed up to the cloud and then Apple gave me a new phone which was IOS6.  How do I restore from Cloud to my new phone which I have just updated to IOS7 please?
    Grateful for any suggestions.

        Hi kattaylor49!
    I hope you are enjoying your new phone! Here are the steps to restore your content:http://bit.ly/1z5kb40.
    Thanks,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

  • Just moved CS4 Web from old mac to new using time machine. Apps won't launch. Help?

    Just moved CS4 Web from old mac to new using time machine. I get an error when I try to launch a program on the new computer (150:30). After contacting live chat about the issue and providing all serial numbers etc. I was directed to a download. The download was a .dmg file that my computer did not recognize. It was suggested that I ask the experts on the forum how to resolve the issue. I have all the discs and serial numbers but the new macbook pro doesn't take discs (I guess they think all apps are downloadable now). Any ideas?

    Hmm... I don't know why they sent you here... CS4 is not part of the Cloud
    I have some download links for earlier versions of Premiere Pro and Premiere Elements, but not CS4 Web
    My best idea is to take a LARGE USB memory stick to a friend with a DVD drive and copy your DVD over to the USB memory stick
    Or, ask in the forum for your program(s) to find out if anyone has CS4 download links
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Consistently losing internet connectivity with AE and Time Warner

    I am trying to help a friend fix a long-standing issue with her wireless network.
    1. Her ISP is Time Warner - she has a cable modem.
    2. She has an Airport Express plugged into it.
    3. She has several Macs, a PC, and 2 iPhone connected wirelessly.
    4. She tells me that several times a week she loses connectivity. My friend fixes it by recycling both the AE and TW cable modem.
    5. Apple replaced the AE even though they didn't think anything was wrong with it. The problem persisted. Her boyfriend tried two other WAPs, the problem persisted.
    6. Her boyfriend thinks that on a few occasions the wireless network still was up, but they were not getting internet through it.
    7. She has had TW out multiple times and they say everything is fine on their end. They said they may have MAC addresses that are "too close together" and my friend should turn on MAC filtering. This makes no sense to me - MAC filtering is for security.
    Her boyfriend is going to plug his computer directly into the TW cable modem the next time they lose wireless internet connectivity, but I said I would go over and take a look.
    I think the best idea is just rebuild their wireless network (I have "Take Control of Your 802.11 Wireless Network" - great book) and see if that helps. But I would appreciate any troubleshooting assistance.

    Welcome to the discussions!
    +She has had TW out multiple times and they say everything is fine on their end. They said they may have MAC addresses that are "too close together" and my friend should turn on MAC filtering. This makes no sense to me - MAC filtering is for security.+
    Unfortunately, you'll need to resign yourself to the fact that there will be little if any real assistance from the cable company. The stuff about MAC addresses being too close together, etc is total nonsense. As you point out, MAC Filtering would have no application here either.
    +She tells me that several times a week she loses connectivity. My friend fixes it by recycling both the AE and TW cable modem. Apple replaced the AE even though they didn't think anything was wrong with it. The problem persisted. Her boyfriend tried two other WAPs, the problem persisted+
    These are clear symptoms that interference of some type is affecting performance on the network. The first thing to do to help improve things is move the Express from it's probable current location down low on the wall behind the cabinet out to an open area where it can radiate its signal as freely as possible. This means using an AC extension cord to place the Express in a better position.
    The next thing to do is make sure that the Express is not located near any other electrical devices, cordless phones, televisions, etc. These can all interfere with the wireless signal.
    These actions may solve the issue. If not, you'll need to start experimenting with different channels for the wireless network on the Express as other nearby wireless networks may be using the same channel or a close adjacent channel. Start at Channel 11 and start working down until you find a more reliable channel, or run out of channels.
    +Her boyfriend is going to plug his computer directly into the TW cable modem the next time they lose wireless internet connectivity+
    Not really a good idea unless he knows how to fully reset the modem before he connects it to his computer and then do the same again when connecting back to the AirPort Express. I'm not sure what he hopes to gain by doing this.
    +I think the best idea is just rebuild their wireless network (I have "Take Control of Your 802.11 Wireless Network" - great book) and see if that helps+
    Good idea.

  • Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser?  It is already installed, I just don't use it.  I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it?  If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
    Stephanie HC

  • I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?

    I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?
    How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
    Frank

    Thanks for the info, this really helps.
    Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
    It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on  AirPort Extreme.
    The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Extreme and click Next
    Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
    You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

  • Airport Extreme 6th generation and Time Warner, Arris modem - no internet on mac

    After installing a new Time Warner Arris modem we have encountered the following issues:
    Light is green on the airport and everything appears normal
    Wifi only works on iPhones, roku, and windows laptops.
    Ethernet from airport extreme is also working (xbox one works fine). 
    Wifi internet does NOT work on Mac computers (we have two in the house both running Yosemite).  The light on the airport is green and the macs can connect to wifi but cannot connect to the internet (DNS issue?). 
    The wifi on my mac yosemite laptop does work on my office wireless and anywhere else but home. 
    Backstory:
    So a few months ago I purchased a brand new 6th generation Airport Extreme 802.11ac.  It worked fine with our old generic Time Warner cable modem until we forced to upgrade to a new Arris modem/router combination this weekend to upgrade our internet speeds (I don't recall the model I can get this later).  We told TWC that we did not need a router and would prefer to use the Apple router but they said it would work just as before by just plugging it into the ethernet port.
    Initially we had network errors and I had to change from NAT to Bridge mode on the airport extreme and this worked for about a day.  The next morning I could only get internet and wifi on my iPhone or a windows machine elsewhere in the house. 
    What I tried (none of these worked):
    resetting the router and modem worked briefly but the problem repeated itself a few hours later or after connecting to a different wireless network.
    deleting network config files (http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/).
    deleting the wireless network from saved networks and connecting again.
    Again this is a problem with mac laptops ONLY.  I have no machines running an older version of OS X so I can't test that easily (I can borrow one from a friend to rule that out).   We have 2 Mac computers both running yosemite and both have the same problem.  Every other wireless device in the house works like a charm. Any ideas?  

    (using a White, new Surfboard 6141 and Time Warner as provider)
    This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
    My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
    Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
    Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
    You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings  (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

  • I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

    I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

    I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
    You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
    I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
    Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
    Please don't hesitate to ask any other question. I will be glad to help you.

  • I moved all of my music to my new computer and now my ipod touch stops the song at end of it why and how do i fix it easily

    i moved all of my music to my new computer and now the songs stop before the end of them or it skips to the next one on the ipod how can i fix it easily

    Assuming your library was in the standard layout before you started move the rest of the iTunes folder to the root of the external drive, move the iTunes Media folder inside it, and shift-start iTunes to connect to library file at \iTunes\iTunes Library.itl.
    See Make a split library portable for some background.
    tt2

  • HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

    Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • Just moved- do I need to change my Apple ID and email address on record since I no longer have access to my previous emails?

    Just moved- do I need to change my Apple ID and email address on record since I no longer have access to my previous emails?
    I used to be with roadrunner and no longer have roadrunner. I now have a gmail account.

    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
     Cheers, Tom

  • I just bought my export pdf but if I sing in and enter in my plan I don't see it, why? when can I start using it?

    I just  bought my export pdf how can i start using it? if i sign in & look for my export pdf I am sent to the page to pay it again??? Could you help me please?

    Hi florence,
    Thanks but it did not work.
    I bougth the Export PDF for power point but I do not see it in my account
    and if I clicked in my orders buttons, nothing appears, it seems my
    purchase is lost. Could you help me to verify it, I did it yesterdar
    September 22, 2014 around 10:30 in the morning Mexico time. Or how do I get
    my funds back?
    Regards
    Fabiola
    2014-09-23 5:50 GMT-05:00 florencejohn <[email protected]>:
        I just bought my export pdf but if I sing in and enter in my plan I
    don't see it, why? when can I start using it?  created by florencejohn
    <https://forums.adobe.com/people/florencejohn> in Adobe ExportPDF - View
    the full discussion <https://forums.adobe.com/message/6755125#6755125>

Maybe you are looking for

  • Can intel 520 series SSD be installed in macbook pro mid 2009

    This is some of the information for the 180g SSD I want to replace my HD in my 13" macbook pro mid 2009 25nm NAND Flash Memory 2.5" form factor SATA 6.0 Gb/s performance My computer though has this information for its hard drive: Product:          MC

  • .pdf with Word hyperlinks opens in internet browser, or not at all

    I'm using Adobe Acrobat X and Word 2010. When I create a .pdf from the Word application, all the hyperlinks work fine, EXCEPT that they open in the default internet browser instead of Reader. If I create the .pdf through Acrobat the links don't work

  • Dcs interface with sap pm

    Dear experts, can anyone explain me the basic steps and information  regarding dcs interface with sap . i want to do this sap implementation for the thermal power station.     i want to generate notifications and work orders when the parameteres of p

  • Can I create a private iCal event in iOS?

    Can someone tell me how to mark an event as private with iCal using iOS? Thanks!

  • ER label in ADF Tables

    Hi, I noticed that attributes in an ADF tables do not have the LABEL property attached. This is logical since the Table Column identifies them BUT if you are dealing with mandatory items and you leave one empty, the message you get does not describe