I just moved and wireless internet is now provided for me. I am not using my Time Capsule as a router anymore but can I still use it as my storage device wirelessly? So far I cannot get it to work. Please help.

Hi,
I just moved to a new place. I used to have my own internet setup and used my Airport Time Capsule as my router. Now that I don't need to use it as a router I would still like to use it as a storage device for my pictures. Can I still do that wirelessly or do I have to plug it into my computer? And if I do (which would really be crumby) do I just use a USB cable?
Please help. I have a lot of work stored on it and I am feeling pretty stuck at the moment.
Thank you,
Charlie

You can use your Time Capsule in your new network in a number of ways. One would be as a NAS device which I believe you are looking to do.
To do so, you would connect the TC to the new router by Ethernet. You would also want to reconfigure the TC as a bridge and disable its wireless radios.
You can do both of these using the AirPort Utility, as follows:
Run the AirPort Utility.
Select the TC, and then, select Edit.
Select the Network tab.
Change Router Mode to: Off (Bridge Mode)
Select the Wireless tab.
Change Network Mode to: Off
Select Update and allow the TC to restart.

Similar Messages

Cannot Get Connection to Work, Please Help!

I just signed up and got the 7500 wireless gateway, set up all the wiring as illustrated (double checked 4 times to be sure). I have the E4 line going into my computer's jack and its supposed to provide wireless service anyway. My computer says it recognizes having connectivity, but when I run the Verizon setup CD, it keeps saying it can't connect during the test. I can't get anywhere on the web with any browser, but I can't see what is wrong.
Before anyone asks, my activation date was last Tuesday. I could really use some help!

Since some how and way, you can access the net - with the computer that you are posting from.
#1 Go to
https://www22.verizon.com/foryourhome/eRepairNet/DSLRepairANR/common/DSL_Repair.aspx
And check the order status.
#2 Also see as need https://www22.verizon.com/foryourhome/eRepairNet/DSLRepairANR/Common/SupportDetails.aspx?case=c18247
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Cannot get SMTP to work, Please Help.

Hello,
I recently bought the WVC80N camera.
The main reason i purchased it was to have motion alerts emailed to me.
I have been trying all different combination for a week and still get TEST EMAIL FAILED.
Here are my specifics:
ISP: Verizon FiOS
I have a D-link N router setup as an access point that connects to my FiOS router/modem.
The camera connectes to the wireless on the D-Link router.
I have tried my ISP SMTP settings,
I have Verizon email through Yahoo! so I also tried those settings.
I made a GMX account and tried that, all with no luck.
Can someone please provide me some insight on how to get this working?
Thank You!
Solved!
Go to Solution.

For the camera to send you do NOT need to open ports, the camera is sending SMTP OUTBOUND, opening ports is for INBOUND traffic.
So, the issue lies within Verizon and not with Cisco, it's the way you are sending out and that verizon is blocking SMTP outbound unless the FROM address matches the Verizon domain and you are an authorized user with a valid email on there.
They may also have SMTP port 25 outbound BLOCKED, so you'd have to use an alternate port. Not sure since I don't have verizon. BUT, there is a solution with something like the TZO OMR service, which is outbound mail relay, allowing your camera to send through the TZO Servers and not Verizon. TZO accepts mail on port 2525 also, which allows you to get around the blocked port 25 from Verizon.
It's not cisco's fault, be mad at your ISP for locking crap down....not cisco
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Cannot get itunes to work please help

When I double clik on ITunes it takes ages to start then when i plug my ipod or shuffle in the window opens showing the drive ie. E:\ for my shuffle and i get the following message in itunes " The software required for communicating with the Ipod s not installed correctly. Please re-install ITunes to re-installthe Ipods software"
I have uninstalled and re-installed, clean out the registry tried selective startup.
Been without itunes for over a week now any help would be much appreciated.
I also installed Itunes on my works laptop and this operates fine and sees the ipods, all be it without my library.

this is what i get when i run diagnostics in itunes with shuffle connected
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gericom Ego
iTunes 7.7.0.43
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.0.33
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 00C44CCC186A10D9
Current user is an administrator.
The current local date and time is 2008-07-30 10:56:04.
iTunes is not running in safe mode.
Video Display Information
ATI MOBILITY RADEON 9700
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.0.43 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.0.28.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
Serial Number: 5E643ZULVTE

Cannot get raid to work please help!!!

I have a msi p67a-gd80 (b3) board that im trying to configure a raid 0 array on. I have a ocz revodrive 100gb as the main and a WD caviar black 2TB as the second drive. ive been trying to figure out how to run these in raid and have come up short each time. Everytime i try to install the Intel Rapid Storage Technology Driver , it always says my system does not meet the requirments. Im running win7 64 bit.

Quote from: Stu on 07-July-11, 00:02:21
Not really. What kind of performance increase are you looking for?
Use your super-fast Revodrive as a boot drive, with your operating system installed on. Then use the 2TB drive as a 'storage' drive (and put your pagefile/swapfile on there also).
im using my revo as my boot drive but id also like to put a few games on it. but i also would like to put games on my HDD and other programs that dont need to be on the ssd. is there any way to do this? or am i just an idiot

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Help please?

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple TV. I have had no need to download any of my movies to my Mac. Which has been great. However, I remember that I used to now have to do this... or did I? I am just frustrated because I want to stream all this stuff vice haveing to waiting for it all to download fill up my Mac's HD and then just delete. Someone help please?

Play the movie in iTunes to stream it.
Click the cloud icon to download it.

I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
Clinton

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

will TC appear on My desk top?
It will, if you do the following:
Open Macintosh HD and locate the Time Capsule icon under the SHARED heading on the left side of he window.
Click on the Time Capsule icon and a folder representing the drive will appear to the right
Double click the folder and the drive icon will appear on the desktop

HT1212 "iphone is disabled, connect to itunes". I cannot get anything to work. Help!

I have tried to restore my iphone and nothing works! It starts the process for about 15 minutes then the phone goes back to the message "iphone is disabled, connect to itunes". I cannot get anything to work. Help! I am so frustrated with our iphones, that I am ready to switch to different phones for my entire family. Please help!!!

Did you check your security software settings, to make sure iTunes can contact Apple servers during the restore process?
iTunes: Troubleshooting security software issues

I have a Time Capsule as my router. I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

No, its is connected direct to the providers fiber box.

Loaded itunes on a new computer, and synced ipad. Now only those few songs I had on the ipad are in my library. But all of my ipods (3) have my full music library. How do i get all my songs moved back into my library from one of my ipods?

I installed itunes on a new laptop, with Windows 8, and synced my ipad. Now my music library has only those few songs I had synced to the ipad, or roughly a quarter of my original library. My ipods (all three) still have the full library, but everytime I try to sync them, I am asked if I want to delete all of the contents and replace with the (much smaller) itunes library. Of course I don't, but how do I "reverse sync" and replace all the music contents of my library with the contents from one of my ipods?

See Recover your iTunes library from your iPod or iOS device.
tt2

Gmail Cannot Get Mail...please help!

My iPhone and MacBook Native Mail apps both stopped responding to my main Gmail account. I have tried everything from deleting and re-adding the account in question, to restoring my iPhone (iOS 4), and setting it up as a new phone. I have checked my account settings through Gmail, and even changed my password. The error message I receive is:
Cannot Get Mail
The user name or password for "[email protected]" is incorrect.
or
Cannot Get Mail
The User Name or Password for "imap.gmail.com" is incorrect.
Again, I have logged in and out of my main account through the website with no problems. I am not sure what to do now.

I have a similar issue although mine seems to point towards the fault of Gmail.
I am using mail on 3 different devices
-iPhone 4 (current update)
-iPad 3G (current update)
-iMac 21.5" model (all current updates)
I use a work e-mail AND a personal e-mail, both through Gmail. My work and personal e-mail addresses have been working fine for quite some time. Yesterday however all of the sudden I am getting the same error "the username or password for "[email protected]" is incorrect". This is ONLY my work e-mail, my personal is still working fine on all 3 devices (which leads me to believe it's Gmail with the problem, not my devices). Not sure what to do and google does not have a support phone # or e-mail that i can find. If anyone can help that would be awesome.

Just got an ipod cant get it to work please help

hi i just got an ipod nano it came with the apple ipod + itunes cd, is that the only cd you need? ok so i installed everything on the computer (win xp) plugged the ipod into the usb slot it charged, but all it will say is do not disconnect thats it ive uninstalled everything and reinstalled everything i did the update driver thing, but still all it will say is do not disconnect and it doesnt show up in itunes, and my computer just sees it as a mass storage device, but if i unplug it and turn it on by holding the 2 buttons it works fine but no music so i plug it back in hold the buttons to turn it on it comes on then goes right back to saying do not disconnect, anyone have any ideas?

Welcome to Apple Discussions!
It sounds like you are doing things basically fine.
The "Do Not Disconnect" screen is normal for your iPod to say to you if you connect it to your computer. When you want to disconnect your iPod from the computer, all you'll need to do is a simple "eject" of the iPod:
Look at the bottom-right corner of your screen, and there's the system tray icons there. If the "Safely Remove Hardware" icon is there, click on it, select your iPod, and click "stop".
As for your iPod not being recognized by iTunes, does it show up in "My Computer" or not? If it does, try formatting your iPod:
Format your iPod via "My Computer":
Go to "My Computer".
Right-click your iPod there.
Click on "Format".
Does the iPod format correctly? Check if it works in iTunes after this.
If your iPod doesn't show up in "My Computer", then try formatting your iPod via "Control Panel":
Open Control Panel.
Click the "switch to classic view" link, if necessary.
Double click "administrative tools".
Double click "computer management".
Under "storage" click on "disk management".
Find your iPod's listing.
Right-click on it and click "format".
Select "FAT32" and start the format.
See if your iPod it recognized by iTunes now.
Any more questions? I hope this helps!
~~Kylene

I cannot get music to download- Please help!!!!!!!

I am on the verge of screaming and pulling my hair out!!!! Please help!!! nI got a new laptop and I downloaded my ipod(i think its the 1st gen) onto it. I also downloaded new music on my laptop, when I pulled up itunes to load my new songs onto my ipod I ran into multiple problems. I uninstalled and installed the software multiple times. Downloaded the updated versions and when I connected my ipod it still will not upload the music. I have searched everywhere on the support page, tried everything they suggested. Nothing works. Does anyone have any ideas or had this problem? OR am I going to be forced to buy a new one?

Here's what I did. I took songs and right-clicked them and clicked "add to playlist" I clicked on the name of my ipod shuffle, and it appeared in the contents section of my shuffle's zone. I made sure that the checkboxes next to the songs were checked, then clicked sync.
Hope this helps -:D-Scottdudester-:D-

PS 6, Windows 7 64; installed second monitor and when renaming in bridge both screens fill with large film strip and I cannot get back to normal; please help!

@

Try a reset (click on that down pointing arrow) and also if you have a Mac, toggle the green resize button. It usually forces Bridge to resize to the screen.
If worse comes to worse, reset Bridge's Preferences as explained here: Troubleshoot errors, freezes | Adobe Bridge | Windows, Mac OS
When I use a external larger monitor, I select just that monitor.

I just moved and wireless internet is now provided for me. I am not using my Time Capsule as a router anymore but can I still use it as my storage device wirelessly? So far I cannot get it to work. Please help.

Similar Messages

Maybe you are looking for