I JUST ORDERED MY 20 INCH INTEL iMAC!!!

Here are the specs:
2.0 GHZ Dual Core Intel
2 GB of DDR Ram
250 GB Hard Drive
256 MB of DDR Video Card
Apple Care
This is going to be stepping up from my current Power Book (See stats below).
Is there anything I should be weary of with the new iMac? Anything I should look out for?
...I cant wait till i get it...

I have the exact same system sitting in front of me right now!
I haven't had any issues so far. WoW is absolutely incredible now that it runs natively. I can VPN to work without issue (TunnelBlick rocks!). TeamSpeex works great. DarwinPorts installed easily as well.

Similar Messages

Just got a 20-inch Intel iMac

Hi,
I just got a 20-inch Intel iMac and have couple of questions before I even open the box. I'm a PC to Mac changeover guy and I'm pretty new to to the Macintosh platform. I would appreciate your inputs to keep my system flying.
To begin with, I know that I have to upgrade my RAM to either 1.5GB or 2GB and also know Crucial is the way to go.
Apart from that, I have these questions:
1. What do I first check for after opening the box? (Dead pixels for example and etc..etc..etc..) and how do I do that?
2. Absolutely reqd tools and utilities to keep the system running at peak.
3. Absolutely reqd apps.
4. BootCamp (ofcourse) and is there a Mac OS X video conf. software that can use iSight and also can talk to PC users with any camera? Also, with BootCamp can I have multiple Windows partitions (for example having a partition for scratch disk when doing video editing)?
5.How do I make Apple DVD Player to read a DVD image (ISOs) that are lying on the hard drive? Can this also work when FrontRow is used? I have lot of personal DVDs that I bought and would like to view them from the hard drive instead of running it from the slot.
6. How do I map the Mac Keyboard to work in Windows when running on XP? Is there a Windows software that runs as a service to make it happen?
Anything else I have to do?
Rgds.

The Mac is safely nestled in a lot of styrofoam padding inside the box, so I doubt a ding on the outside can do much damage.
I like to use Onyx for running my routine maintenance. It is a great little app and it's free;
Onyx
I use Monolingual to remove language resources that build up over time as you install more 3rd party apps and Apple updates/upgrades. Also free;
Monolingual
AppZapper is great for removing apps you want to trash, especially if they did not come with an uninstaller. It can hunt down those pesky little files that sometimes hang around. US$12.95 with updates for life;
AppZapper
This is a great website for maintaining your Mac and troubleshooting problems. Dr. Smoke is an Apple Discussions contributor.
The X Lab
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta
I'm sure now that I have made a few suggestions that others will come out of the woodwork with their pet apps as well!

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

20 inch Intel iMac with 512 MB RAM: is an additional 512 or 1 gB stick bet

I have a stock 20 inch Intel iMac with 512 MB of RAM.
I've read that this computer uses dual channel RAM, so I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?
Also, anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?

"anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?"
Regardless who made your OEM module, it will have a label with their name and the product specs (or at least a product number, which, on a page at their website, can be decoded for its exact specs).
Mine was made by the U.S. company Micron Technology at their Singapore factory, and the label states that the module is lead free. A similar Micron module can be purchased online from Micron's wholly owned subsidiary Crucial Technology, which is their retailing arm. Retail customers can not order directly from Micron, just as they can not order directly from either Samsung or Hynix, the other two large OEM RAM manufacturers.
"I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?"
I agree that more RAM is better, will make it snappier, and prefer to buy my 1GB stick of RAM from Crucial, as I know it will be compatible for my Mac and its OEM stick (regardless of the maker) as long as I use their online Mac selector tool.

20 Inch Intel iMac Playing Doom 3...

Does anyone know how the new 20 Inch iMac runs Doom 3? If so how does it run, and what are the specs of the machine running it?
Any feedback is appreciated, Thanks.

http://www.macworld.com/2006/01/reviews/intelimacs/index.php?pf=1
I hope you get a more personal answer but until you do try this link.
iMac 17" Intel Core Duo Mac OS X (10.4.4)

24 Inch Intel iMac... may have bad Logic Board

What are my options if the Logic Board is bad? Is this something you can purchase? Dont have an Apple Store anywhere near me.
Thanks!

What are my options if the Logic Board is bad? Is this something you can purchase?
No, at least not from Apple. You'd have to find the logic board from some unauthorized third-party vendor.
Dont have an Apple Store anywhere near me.
You do have an authorized Apple service center in Wichita, Haddock Computer Center, on E. 13th St. N. They can handle the repair for you. There are also places, including an Apple Store, in Tulsa and Oklahoma City which might be an option.

Using an imac G3 as second monitor for intel imac

I just purchased a 20 inch intel imac and was curious if I could use my old imac G3 as the second monitor.
I already have the DVI to VGA adapter to use in the mini DVI port on the intel imac. Is there an adapter that I can use to plug this cable into the VGA out on the back of my old G3 imac?
intel duo imac Mac OS X (10.4.6)

The VGA port on your old iMac is output, not input,
so what you are suggesting wouldn't work.
To do it, you'd have to take apart the G3 and hack a
connection from the gfx card to the display to
work... probably more trouble than it's worth, given
the quality & res of the old g3 displays.
Thanks for the quick response. Looks like I will have to pick up a second monitor.

Just bought new 24 inch iMac, what a monster!

Just got back from Apple retail store in Brent Cross near London in the UK with my new 24 inch iMac.
All I can say is BRILLIANT!!. What a stunning machine. I had a 20 inch that I bought just 3 weeks back, but I managed to get rid of it to buy this new one.
Now that I have it on my desk at home I can really appreciate the extra 4 inches, it seems like a lot more than that.
As the Apple retail store is a 1-hour drive for me I insisted on taking it out of the box and booting it up in the store to check it out before the drive home. It was just as well that I did as there was a single stuck (black) pixel in bottom right hand corner. This would not bother most people, but I do a lot of Photoshop work and I can only imagine that I would be constantly trying to airbrush a speck out of a picture, only to discover that it was a stuck/dead pixel.
Anyway, the salesman said no problem and got me another one, which I also checked there and then, second one was perfect.
Anyone who has a 20 inch, get rid of it and buy a 24 inch straight away. They are just awesome.
Even the staff at the Apple retail store were standing around me in absolute awe as I was checking mine out and filling in my personal details, as they did not have a demo unit on display at this time.
Other people were standing around too, a little crowd gathered; I felt like an Apple God for a moment there
The edges are not dark like somebody else mentioned, mine is nice and bright edge-to-edge. In fact is is brighter than my old (3 week old) iMac 20 inch as I have to reduce the brightness on this new 24 inch monster a little bit more to get a nice brightness that I'm used too.
I put in an extra 2 Gig of ram (2 x 1 GB sticks from my old 3-week old iMac 20 inch model), but bought the standard 24 inch model with standard graphics card. Didn't see the point in better graphics card as I don't do gaming, just inDesign and Photoshop on this machine.
This screen is also 1920x1200 so it is TRUE HD for playback of future 1920x1080i or 1920x1080p Bluray or HD DVDs, nice. If you think about it, if you popped to a local store and bought a HD-Ready TV with this resolution it would cost you a lot more than the price of the 24 inch iMac so it's like getting a HD TV with a computer thrown in for free, only cheaper
Had it turned on now for about 3 hours and have been spinning the hard drive a lot as I transfer a lot of old files from external Firewire HD and it is warm near the vents on back/top, nothing excessive though.
The fan is ever so slightly louder than old 20 inch, but again, negligible.
Well I'm off to play some more and test some DVDs etc.
In the meantime they are fantastic machines and I highly recommend them to everyone.
Buy one today, I don't care how, just get one!!!

Hey guys, didn't mean to scare anyone with that dead-pixel thing. I've had about 7 Macs over the past 5 years (since moving over from the muddy waters of Windows) and I've NEVER had a single problem. To be honest I was amazed the first 24 inch iMac I pulled out of the box actually had a stuck pixel and so were the staff. One of them tried to 'massage' it away, to no avail. It was hardly noticeable; I'm just a fussy git.
I doubt any of you guys will take delivery of one with a dead/stuck pixel, this is very rare as Apple only use grade-A LCD panels that have a high quality-control-production-line.
Anyway, howwow, you really must get a 24 inch; here's why.
I had 20 inch and spend a lot of time laying out an A4 magazine in Adobe InDesign. I thought my 20 inch Intel Imac was great until I got the 24. Now I can have a full two-page spread across the screen zoomed in 25% bigger than actual size and still have room for my pallets down the left and right hand side. With my old 20 inch iMac I had to collapse or hide certain pallets away or they were over the top of my page on the top/right hand side, which was a pain.
Another advantage of 24 over 20 is that it is much easier copying files from external to internal hard drives and vice-versa, especially when in Column view as you can have 5 columns on each window; plenty. On my 20 inch I could not get anywhere near this and had to move windows around the desktop to get them into the best space; not anymore.
Two of my friends came (almost literally) to see me last night and when they stepped into my study room and clocked the massive 24 inch iMac they both almost creamed their jeans right then and there. They were speechless; they are both windows PC users, or should I say were. The 24 inches was more than enough to convince them; well, they were both ladies They are heading for Apple retail store as I type this to buy one each. Now we all know how bloody hard it is trying to convert Windows users to Mac, the 24 inch iMac has no problem doing that.
I had a large high-def Quicktime movie playing, 6 smaller Quicktime movies playing, a DVD playing with Photobooth open and a bunch of other things, when I hit the exposé button to reveal them all at once it is just amazing on this large screen.
I've also noticed that running Adobe Photoshop and InDesign on this latest 2.16 GHz Intel Core 2 Due with 2 GB of RAM is a lot faster than my older (3 week old) iMac 20 inch Intel Core Due machine, that extra '2' really pushes Rosetta programmes along the rails a lot faster; it's sort of turbo charged now. This is great for me as I view InDesign stuff in OverView mode (higher res, but slower).
This new machine takes just 31 seconds to boot from a cold start by pressing the power button on the back. Fast or what. Ever watch a Windows user switch on their machine and go have a cuppa coffee whilst they wait
The graphics (and I only have bog-standard card it came with) are brilliant. Pin sharp and I've set up a custom colour calibration for the screen because of Photoshop and InDesign and it is stunning.
Only slight drawback is if you sit too close and are a fast typer, it's like watching tennis as your head looks from right to left as you type across the screen

I just restored my 24 inch imac and it seems to be running MUCH slower than before. Any Ideas why? thanks in advance for your help!

I have erased and restored my 24 inch Intel iMac. I have upgraded to the last version of X os. My system is running WAY slower than it was before. Even opening windows seems to lag and the spinning wheel come up for everything. Every task is slow, even typing this! lol
Here are my specs:
Model Name:          iMac
Model Identifier:          iMac8,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM81.00C1.B00
SMC Version (system):          1.30f1
Any ideas would be helpful. Is this a hardware issue?
Thanks!

Matt:
Thanks for the update. It is good to know that the maintenance procedures helped. Regular maintenance and a good backup are key to computer security. Gulliver's article has a suggested schedule. Dr. Smoke's FAQ on Backup and Recovery has excellent information and advice. I part company with him on his insistence on Retrospect, which I have found to be difficult to use. SuperDuper has been shown the best backup software in these tests.
If you usually leave your computer on or asleep, it is good practice to shut down and start up in Safe Mode occausionally. I do it about once weekly.
Good luck.
cornelius
Message was edited by: cornelius

IMAC 20 INCH INTEL WHITE USB PORTS DONT WORK

i have a 20 inch intel imac white and my usb ports dont detect any of any external devices such hard drive and camera or usb flash ,but my keyboard and mouse are detected and work .I already did a smc reset and pram and they show up under the apple profiler and i created a new user and tried it from there still nothing .Will a power usb hub fix this issue ,i think its a low voltage issue any suggestions.I have tried all the ports as well all the same
Message was edited by: s281er238

Hi Enialreve,
Thanks for posting and welcome to the Lenovo Community,
I’d like to help you with the issue that you’re facing and I need to confirm you that all the steps that you’ve done is absolutely correct,
And as I can see that you’ve followed all the steps that we can do inside the operating system,
And I’d like to advise you that we can try to perform a recovery to get the machine back to the initial state and am sorry to ask you to take a backup from the data you need as the recovery will get the machine back as a new machine and all the Data on C: partition will be lost,
Kindly turn off the machine and connect the charger and the battery and then press on the One key recovery button which is the small one with the curve arrow,
And then the system will be booting to the recovery,
For more information about the recovery check the below link:
One Key Recovery
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

20" Intel iMac and Samsung Laser Printer

I ordered my new 20" Intel iMac last Saturday, the 14th. From day one, it said estimated ship was Jan. 24th. Yesterday I checked the status and it still said the 24th, but it also said estimated delivery for Jan. 31st. I was sad because when i ordered it, it said estimated ship 3-5 business days. Jan. 24th would be longer than that. So I checked my e-mail this morning, and lo and behold, I have an e-mail from Apple saying my new computer shipped out this morning, making it 5 business days since I ordered it (4 if they considered Monday a holiday). I just wanted to reassure others that the ship date may not be as late as it's estimated.
My question is this... I have a Samsung laser printer (the ML-1740) hooked up to my fiance's Windows XP machine. My Sony Vaio desktop (which I'm giving to my mom) can see the printer just fine. It prints just as if it was hooked up to it. My Powerbook however, cannot see the Samsung printer over the network. I'm a nursing student and print out tons of text only stuff, so I really need to use the laser printer with my new Mac. I've see a lot of different discussions on Mac drivers for this particular model, but I haven't tried any of them on my Powerbook, and I'm curious as to whether or not any of them would even work with the new Intel Mac. My other question is whether or not there is any way I can get my iMac to see the printer on the Windows. I don't necessarily have to install drivers on the Mac if I don't need to. I just need a solution to make it work. If I have to install something, that's fine. If I can just make it print over the network, that's great too. I don't ever use any of the settings the Samsung software provides, so just basic printing is fine. I just don't want to have to e-mail all my documents to myself and then go to the Windows machine to have to print. I apologize if any of this is confusing. What are some of the things I can try to make this work? Or can someone point me in another direction to get the answers. I was stupid in not realizing that the printer didn't support Mac OS X when I bought it, even though I already have one Mac. Thanks so much! I love these forums!

My shipping was the same way, maybe they had a supply shortage of RAM or just a long queue of computers waiting for upgrades and not enough people to perform them. Mine shipped today with an estimate of for the 25th.
I have looked around on Apples site and couldn't find anything about supported printers. You will have to install some form of driver on the Mac. You will have to make sure the PC has it shared correctly. Read about printer sharing in the windows help files. I don't know any more off hand.

Aperture on 20" Intel iMac

I just ordered a 20 inch iMac with two Gigs of ram and 256 Megs of video ram. How will Aperture run on this machine? Also my workflow includes converting all my various Raw files to DNG. Will Aperture open and treat these files just as any Raw file? It occurs to me that this would be a moderately tranportable setup, useful for Client presentations and such.
20" iMac Core Duo 2gig ram Mac OS X (10.4.6)

nothing to say

Upgrade Graphics card for 2007 24in Intel iMac...any word yet?

Hello, I remember talking about upgrading my 128mb graphics card on my 2007 24 inch Intel iMac a while back. people said it was possible, but now that two years have passed almost, have they come out with new cards that fit this machine? what is the best to use and where do I get one?
Is it easy enough for me to do myself or should I have it installed professionally?
Thanks!

Unfortunately not these machines were not intended to have graphic card upgrades therefore no graphics card upgrade is available for your iMac.
If you want an upgradeable machine the next time your purchase I would recommend looking at the Mac Pro which is designed with upgradability in mind, including memory, hard drives, and yes graphics cards.

Tiger on iNtel iMac "Printing" over Airport to HP 2100M

Nice new iNtel iMac 2GHz running Airport Extreme can't print via Airport to a networked HP 2100M. The HP has an EIO card and it's connected to the LAN by that cable.
I have an old iMac that's hardwired to an ethernet hub that's being driven by the AEB and the HP 2100M is also connected to that hub.
The old iMac sees the printer and prints just fine.
The new Intel iMac doesn't see the HP over Appletalk and I'm not able to figure out how to setup the new iMac to print via Airport using the IP address of the HP printer.
Any help would be appreciated.
Here's a 30,000 ft level view of my LAN:
Internet Cloud =>Comcast Cable ISP =>Cable Router
AEB =>Linksys Ethernet Hub
•iMac 350MHz (don't laugh. She's still a beauty) OSX 10.2.8
•HP 2100M with Network EIO card
iNtel iMac (sees the Internet just fine via AEB, but can't see the printer for patootie!)
iNtel iMac 2GHz Mac OS X (10.4.5) HP 2100M with EIO network card, AEB LAN,

Unfortunately, that didn't work. I power cycled the cable modem, AEB, router hub, and the printer and the iMac still can't "see" the printer.
I've looked at the Airport discussions and this problem is a larger issue than the iNtel iMacs. It sounds like it's probably an AEB issue.
I'm running the latest firmware to no avail. It almost sounds to me in the Apple literature that they only support USB printing through Airport. This would be a serious blunder as the business world relies more on networked server based laserwriters than USB dot matrix printers.

Issues with iMovie '06 on new Intel iMac

Hi All,
Hi have just got a brand new Intel iMac 2.0GHz 20" Core 2 Duo with the new shiny screen!! Looks very snazzy and speed is pretty good.
Due to the limitations of iMovie '08 and the fact that PPC machines can't run it, I have uninstalled the iLife '08 that shipped with it and installed iLife '06 so that the machines onsite are all running the same apps.
When I open iMovie, I get the following error message:
"Your computer contains a graphics card which may not support iMovie.
iMovie requires a "Quartz Extreme Compatible" graphics card. Certain iMovie features such as Themes, Ken Burns Photos, and Video FX may not work properly with your graphics card."
This is a bit concerning on a new iMac that won't even run Apple's own application! The graphics card as reported by System Profiler is:
Chipset Model: ATI,RadeonHD2600
Type: Display
Bus: PCIe
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9583
Revision ID: 0x0000
ROM Revision: 113-B2250F-212
EFI Driver Version: 01.00.212
When I go into iMovie and try dragging a JPEG file into the clips pane, I receive the following error message:
"Error during import
The file could not be imported: -[QCView_finishInitialization]: Object creation failed"
Does anyone know if iMovie '06 is able to run under the new iMacs?
Cheers,
PJR
--

Just as an update...
I have deleted the iLife applications form /Applications, installed iLife '08 excluding iMovie, downloaded the free iMovie '06 installer from Apple, installed it and tried the same process again of launching iMovie and importing a JPEG. The same two errors still exist
PJR

I JUST ORDERED MY 20 INCH INTEL iMAC!!!

Similar Messages

Maybe you are looking for