I just ordered one of these....

Just bought three...

And I expect to get lynched by the devs at work.......
US Link -> http://skreened.com/nametshirts/sysadmin-because-even-developers-need-heroes-t-shirts
UK Link -> https://www.teezily.com/campaigns/sysadminbednh
This topic first appeared in the Spiceworks Community

Similar Messages

Just ordered a MP and need some "set-up" advice...

Hi All,
Like some, I waited all through Nov, and Dec to see if Apple was going to come out with an "octo" configuration and can't wait any longer. I just ordered one through Amazon as well as 2 extra gigs (2x1gb) of RAM from OWC. I will probably be ordering a couple of Maxline Pro 500g for a RAID 0 drive.
I am upgrading from a REV A iMac G5 and a MDD dual 1.25 G4. I use my iMac for design software (PS, AI etc.) and the G4 for FCS and iTunes. I have an extra 250gb HD in the G4. In addition I have a 250g external (usb 2...yuk) drive and another external 500g FW800 Lacie drive that I use for backups and an occasion PS scratch disk.
Does anyone have any reccomendations on a good configuration for design and Final Cut work using my existing equip? I.E. Should I keep the music on the G4, or use it as a backup? I have been doing so much research since the MacPro's came out that my head feels like it's gonna blow.
Any advice is greatly appreciated!
P.S. If Apple releases the "Octo Mac" at Macworld, I'm gonna slit my wrists.

Of course we're not allowed to speculate here on these forums, but last I heard (SPECULATION!!!) was that the octo will be an upgradeable solution to those of us who have the current MacPros... but don't count on what I say - PLEASE!!
Anyway -- I've been trying to hang onto my G4 as a seperate and controlable tower for a while... I must say - I'm going to finally get rid of it asap. Few things to keep in mind...
You need SATA drives in the MacPro - I'll wager your G4 has ATA drives. Don't work in the MacPro - EXCEPT you can slide it in your lower optical bay under the DVD drive and link it there... it's an ATA bus thingie.
Here's what I did... I bought a bunch of 320gig drives for about 100us and hooked the two machines up via Gigabite ethernet. Then, just copied the files to the new drives. And actually -- speed was fast enough that I was able to run FCS with the media on the network drives. Workable solution for the short term.
Good luck,
CaptM

Just ordered the iphone 5 today.. 9/20

After taking quite a while to decide to purchase a new iphone, I just ordered one today (16GB white). I know its a long shot, but any chance it will ship sooner than 10/12? Ive been hearing that orders with a 9/26 and 10/5 delivery date were getting shipped early so.. just a thought.

According to a representative I spoke with earlier, although on verizonwireless.com shows that the next shipping date is 10/12, there is the possibility that it will be shipped on 10/5. I was told that this was more likely to happen if the order was made through a live representative on the phone... I'm just ****** that I had to reorder a second time even though I had a confirmed order made on 9/14 at 3:29 am which got cancelled for no apparent reason...

HT3412 I just ordered and received 2 large Hardcover photo books and one arrived with the inside binding messed up. Do you know how this can get corrected?

Have you tried returning a photo book that has a binding problem? I just ordered 2 large hardcover photobooks and one arrived with the inside binding messed up. Do you know how this can get corrected? They were over $80 and it seems they should not be flawed. I would appreciate any tips. lindajenkins

Contact Apple Support - link at the bottom of every page of these forums
LN

My daughter just got her ipod and she begam multiple apple id's. she entered her itunes card code into one of these and we dont know which one

my daughter received an ipod and an itunes card for christmas and began multiple apple id's with a few different email addresses. she entered the itunes card code into one of these. i have all the card info and receipt. is there anyway she can still use this card?

As long as you are signed into the account which she registered the card with, you will be able to use it. I'm guessing you just don't know which account that is. Logging into all of them would be the only way to find that out. Hope that helps :)

I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

To add to what Stonerock has mentioned, you can either create Playlists in your iTunes Library, containing exactly what you want, and then Sync them to your iPod, or you can use the iPod Classic's On-The-Go feature.
Reading between the lines, I'm going to assume for now that you want to be able to create your preferred listening list while "out and about" - so not near your iTunes library. (You have posted in iPod Classic, after all.) You can do this with the On-The-Go Playlist.
Look in the Playlists menu on the iPod. It probably contains the Recently Added, Recently Played and other pre-made Playlists that you see in your iTunes Library. At the bottom of the Playlists list, is the On-The-Go showing 0 Songs. Scroll down to it and press the Select (centre) button. The screen will give you instruction on adding songs to the On-The-Go Playlist.
Basically, if you press-and-hold the Select (centre) button, while highlighting a song, the song title will blink as it is added to the On-The-Go Playlist. Try it, then go back to Playlists/On-The-Go and notice that it will now say 1 Song. (Note, you cannot add a "now playing" song to the On-The-Go Playlist.) Repeat this for every song you want to have in the list. You can also look in the Albums menu, highlight the album title and press-and-hold that to add the complete album to your On-The-Go Playlists with one press. So if you add the two albums to your On-The-Go Playlist, you can then listen to just those two albums.
To shuffle the songs, turn on Shuffle on your iPod. Either, go into Settings/Shuffle and press the Select button to toggle between Off/Songs/Albums, or on the Now Playing screen, press the Select button three times to reach the Shuffle option, where you use the scroll wheel to move between Off/Songs/Albums, press the Select button to activate it.
Having added songs to the On-The-Go Playlist, go into it and notice the list of songs and options to Save Playlist (New Playlist 1) or Clear Playlist. If you use Sync to manage your iPod (and that really is the best way by the way), the next Sync will transfer any unsaved On-The-Go and any New Playlist Xs that you have, back to your iTunes Library. You can even remove any song from the current On-The-Go Playlist by highlighting it (in the On-The-Go, obviously) and press-and-holding the Select button.
If you need assistance in creating a Playlist in your iTunes Library, please ask.

My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars???

My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars??

'On My Mac' and Yahoo calendars won't sync to iCloud. You can move them to iCloud, but then Yahoo will lose contact with its calendars. if you are happy to sync onlly with iCloud, and thus to your iPhone, you can move the calendars: you will have to do it one at a time, and the process is just a trifle convoluted - it's described in the first set of numbered instructions here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmovecalendars.html

Output not getting proposed from a Purchase Order just for One vendor

Hi All,
We have an issue where in we have maintained a condition record with the access as "Purchase Doc type (NB) and Purchase Organization(XXXX):" pointing towards a "LS" partner function (ALE) and "4"
We have also maintained Partner configuration correctly. The issue which happens only in Production and not in TEst systems which is " only for ONE VENDOR the output is not getting proposed and for the other vendors it is getting proposed correctly. We also have a requirement attached to the Output and we do not have any vendor specific logic.
We also checked /Compared both the test and production system on Output Configuration as well as master data for VEndor and Info records and they seem to be ok.
Does any one faced a similar situation why an Output would not propose just for one specific vendor?
Would appreciate if any one can reply asap.
Thanks,

Then check with the requirement you are using bd64 is distribution model.
Check with ur output type, requirement and output determination. ale service comes only in picture partner profile with outbound parameters.
have u done the correct entries under message control in outbound parameters.
thanks
Aman

I just ordered a macbook air today and need to know if the 128gb SSD is enough space. I presently have a macbook pro and am using only 30gb hard drive space so, the apple rep said 128 is enough as I do not load much pictures or gaming etc. Also is i5 ok.

I just ordered a macbook air today and need to know if the 128gb SSD is enough space. I presently have a macbook pro and am using only 30gb hard drive space so, the apple rep said 128 is enough as I do not load much pictures or gaming etc. Also is i5 ok.

Id choose the I5 yes, depends on what your usage is going to be,
....your question about "128 gig being enough" begs the question for IDEALIZED USE of your macbook AIr
In the case of a Macbook Air with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
*Generally, unless you NEED the data at least once every few weeks or once a month,...it really does'nt NEED to be on the SSD of your Macbook Air.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.
Ive got more APPS than any human should have on my 128gig AIR,..(50 or so),....and 10gig of working data, important files etc etc.
Still have 82gig available....... the entire point is that someone shouldnt consider the Air a "storage device" for tons of pics, music, vids, etc.
*Never consider any computer a data storage device at any time under any circumstance, rather a data creation, sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake that will, without fail, strike.
For needs of packing around a LOT of "big data" with your Air in its case..., get a nice 1TB HD for $70, or even a 2TB drive not much bigger.
Perfect 2TB HD, very slim, the "little giant" made by Toshiba (have several of these) $119
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST external HD available that money can buy:
$75
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
http://www.amazon.com/HGST-Touro-Mobile-External-HTOLMX3NA10001ABB/dp/B0062FZ2WS /ref=sr_1_1?s=electronics&ie=UTF8&qid=1379185002&sr=1-1&keywords=hitachi+extern a l+hard+drive

Has anyone used one of these powermats to charge their iPhone(s)?

I've been thinking of maybe getting one of these powermats (see link) and I'm wondering if the IP will charge from one of these mats just by laying on it? The description talks about some "tip" and I'm also wondering if an IP would have be actually be plugged into one of these mats in order to charge? At $90+, it's not a cheap way to go, but I like the idea of just laying my IP or Nano down on it and having the unit charged when I'm out-the-door again. Sounds too good to be true, but I do like techie gadgets .
http://www.amazon.com/Powermat-Office-Black-Doors-Separately/dp/B002JCSAWW/ref=s r11?ie=UTF8&s=wireless&qid=1263794873&sr=8-1

WOW,,,those reviews are awefull. The magnet messes with the compass feature also on the 3Gs. I will not be getting on

How can I purchase even just the one month plan when the survey is NOT available in my country?

The product is not available in my country, and I really need it for a study I'm conducting...
Can you make this available in my country? or just me?
Any ideas where I can post surveys for free?

What country are you in?
This is the list of supported countries:
http://forums.adobe.com/docs/DOC-1375
In order to purchase you need a credit card with a billing address in one of these countries.
Randy

Just ordered iphone 4s online

I just ordered an iphone4s to replace my iphone4 w/ att, and i was just wondering if i will have to have a new phone number when it comes in the mail. or if i can place the sim card into the new one and keep the same phone number.. any info is appreciated ty.

Just follow these simple steps:
1) Connect your current iPhone 4 to iTunes for a complete sync and backup.
2) Move the SIM card from the old phone to the new iPhone 4s.
3) Connect the new 4s to iTunes, and select "Restore from backup".
That should duplicate everything that was on the old phone to the new one- apps, music, settings, the whole shebang.
Good luck!

Just ordered a 32gb 3GS on Orange - some questions

Just ordered by 32gb and it will be with me Tuesday / Wednesday of next week. I'm a long term BlackBerry user but have decided to switch due to the sheer amount of apps etc available. Anyway, some questions about making "the change"....
I have two email accounts I use regularly, a work Exchange account and a personal Yahoo account. Am I right in thinking that these will both provide push mail? Exchange due to the iPhone's support for exchange, and Yahoo as they have some arrangement with Apple so this works?
Also, all my contacts are currently stored on my BB (ignore the Exchange contacts, I'm not worried about them). If I sync these to a new Outlook profile on my PC, and then sync that new profile with the iPhone, all my contacts will be transferred?
Many thanks,
Ed Ludlow

As long as the email provider supports push email, and even if they don't, you can manually setup many email accounts as an IMAP account on the iphone, or worst case sonorous, you can setup an account as a pop account and enable periodic fetching for that particular account.
Regarding you contacts, correct. Sync them to Outlook, and whatever contacts you have in Outlook then, if you have selected "sync contacts with Outlook" under the info pane in iTunes, your contacts will be synced with your iPhone.
One word of advice, I would suggest you tick "replace contacts on iphone" right at the bottom of the info pane in itunes the first time you sync.

I have an old ethernet CAT5 cable. I see they sell ethernet cables in the store. Will one of these cables they sell in the Apple Store give me a better connection, especially since my ethernet cable is pretty much destroyed.

Is the CAT6 ethernet cable they sell good for the regular MBP to ethernet outlet or is buying this a waste of money? My ethernet CAT5 is really old, broken, and I can't beleive anything can move by the twists and knots it has in the cable. would it be better to purchase one of these tht I see in the store?

I have a ethernet cable that is at least 10 years old, and I use it all the time. Nevertheless, if you want to buy one, just order the cheapest one you can find. I don't think the Apple Store sells ethernet cables that are somehow better than any other ones.
Of course, they make the best smartphone out there!

Dialogue tick boxes un-hiding all fields, not just the ones where value has changed to true

I am hoping someone can help me make what I want to happen, happen if certain check boxes are ticked withing the dialogue box
right now I can see on the console print that the tick box turns the value from false to true but the OK button is also un-hiding all my fields rather than just the ones where the value has turned to true. What am I missing here
//Create a Dialogue box for staff to state how many of the account owners are in branch in order for the names to show in the signing section
var Signors =
    result:"cancel",
    DoDialog: function(){return app.execDialog(this);},
    bChk2:false,
    bChk3:false,
    bChk4:false,
    bChk5:false,
    initialize: function(dialog)
        var dlgInit =
                "Chk2": this.bChk2,
                "Chk3": this.bChk3,
                "Chk4": this.bChk4,
        dialog.load(dlgInit);
    commit: function(dialog)
        var oRslt = dialog.store();
        this.bChk2 = oRslt["Chk2"];
        this.bChk3 = oRslt["Chk3"];
        this.bChk4 = oRslt["Chk4"];
    description:
        name: "Signors",
        elements:
                type: "view",
                elements:
                        type: "view",
                        char_height: 10,
                        elements:
                                type: "static_text",
                                item_id: "stat",
                                name: "Who is here to sign:",
                                char_width: 15,
                                alignment: "align_fill",
                                font: "dialog",
                                type: "view",
                                char_width: 8,
                                char_height: 8,
                                align_children: "align_top",
                                elements:
                                        type: "view",
                                        char_width: 8,
                                        char_height: 8,
                                        elements:
                                                type: "check_box",
                                                item_id: "Chk2",
                                                name: "Primary Applicant",
                                                type: "check_box",
                                                item_id: "Chk3",
                                                name: "Associate 1",
                                                type: "check_box",
                                                item_id: "Chk4",
                                                name: "Associate 2",
                        type: "ok_cancel",
// did the value change when ticked - lets check
Signors.bChk2 = false;
Signors.bChk3 = false;
Signors.bChk4 = false;
if("ok" == Signors.DoDialog())
    if (Signors.bChk2 = true)
getField("Signor1").hidden = false;
getField("Staff1").hidden = false;
getField("Date1").hidden = false;
getField("Date2").hidden = false;
if (Signors.bChk3 = true)
getField("Signor2").hidden = false;
getField("Staff2").hidden = false;
getField("Date3").hidden = false;
getField("Date4").hidden = false;
if (Signors.bChk4 = true)
getField("Signor3").hidden = false;
getField("Staff3").hidden = false;
getField("Date5").hidden = false;
getField("Date6").hidden = false;
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
//console.println shows if bChk.. is true or false
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
//Yeah, confirmed values have changed, now show fields based on staff input
//was primary applicant ticked
doWhatIWant: function(results) {
if (results [Signors.bChk2] = true)
getField("Signor1").hidden = false;
getField("Staff1").hidden = false;
getField("Date1").hidden = false;
getField("Date2").hidden = false;
//was Associate 1 ticked
if (results [Signors.bChk3] = true)
getField("Signor2").hidden = false;
getField("Staff2").hidden = false;
getField("Date3").hidden = false;
getField("Date4").hidden = false;
//was Associate 2 ticked
if (Signors.bChk4 = true)
getField("Signor3").hidden = false;
if (Signors.bChk4 = true)
("Staff3").hidden = false;
if (Signors.bChk4 = true)
("Date5").hidden = false;
if (Signors.bChk4 = true)
("Date6").hidden = false;

You're missing some curly brackets, using the incorrect equality operator, and using the long deprecated field.hidden property. Try this:
if ("ok" == Signors.DoDialog()) {
    if (Signors.bChk2) {
        getField("Signor1").display = display.visible;
        getField("Staff1").display = display.visible;
        getField("Date1").display = display.visible;
        getField("Date2").display = display.visible;
    if (Signors.bChk3) {
        getField("Signor2").display = display.visible;
        getField("Staff2").display = display.visible;
        getField("Date3").display = display.visible;
        getField("Date4").display = display.visible;
    if (Signors.bChk4) {
        getField("Signor3").display = display.visible;
        getField("Staff3").display = display.visible;
        getField("Date5").display = display.visible;
        getField("Date6").display = display.visible;
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
I don't know if that will deal with all of the problems, but it's a good start.

I just ordered one of these....

Similar Messages

Maybe you are looking for