I just published my new site

okay, after ALL day of trying to figure this out, I finally uploaded and published my new site. I always have a tendency to complicate simple things and this wasn't any different.
Maybe this isn't the right place to post this, but I haven't had a chance to view the site in anything other than safari and firefox.
Hopefully I got most of the major kinks out, but would any of you mind taking a look and letting me know if you see any glaring errors?
Thanks in advance,
Christina
www.christinaforshay.com

Hi Christina, I just had a look at your site on Explorer on an iMac and on a PC. Everything seems fine on the PC but in the Explorer for Mac there are quite a few blocks of white space. On the Home page there is one right in the middle of the illustration. On the Portfolio page nothing was displayed below the headline choices, i.e. no slideshow button and no illustrations. On the Bio page the background is white and some of the text is overlaid with what I assume is another block of white space. The other pages appeared OK. I did get a warning on the last page but that was just because I didn't have a certain flash plug-in. All of the above could just be my set-up I guess. Hope that helps anyway.
Nice images by the way!

Similar Messages

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

I need to know how you would publish a new site into an existing site

Okay I have a new Dreamweaver website that I just created for my brother in-laws law firm and want to publish in onto an ftp server but the sever already has the existing site published onto it and before I have it pulled down I would like to publish this new site on there to see if everything is going to work okay and if everything is displayed correctly. Does anyone know if there is a way I can do this and how to do it? Please help!!!
Thanks

I typically create a TEST folder on the remote site. Upload new pages and dependant files there for debugging and testing purposes. Then using a 3rd party ftp ware (filezilla, cute ftp or Ws_ftp pro), I move the new site files & folders over to the root directory. If you have used the same filenames as were on the old site, new pages will overwrite the old ones. If you used a different naming convention, you will need to delete old files from server.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

I need to publish a new site for a client and need an IPS Tag. Where can I find this?

I have just produced a new site for a client who had originally set up a site with a host called Mr Site. She has been trying to cancel her contract with them so that she can now have her new site published, but Mr Site are saying they can't do anyting until they have the IPS Tag. Where do I find this and what do I have to do once I've given it to the Mr Site? Any help gratefully received.
Cheers,
Cathie

Thanks Liam,
I think I understand. However, I thought I was using Business Catalyst for hosting, so am a bit confused about that. I've created a new site for my client using Muse and assumed that by publishing it using BC that I'd be hosting it for my client through BC. I guess that is wrong. Do you have any suggestions for how I go about hosting the site? My client purchased the domain name via Mr Site (I think?) and I'm not sure they are going to allow a site created outside of their template system to be hosted by them. I'm a bit green when it comes to the hosting side of things, this is the first Muse site that I've created and am on a very steep learning curve. Any help you can give me would be wonderful.
Cheers,
Cathie

I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

By search you are referring to Google search ?? or you are using any search module in your site and the keywords shows same topic multiple times on page ?
Please elaborate more, provide site url.
Regarding using keywords, description etc, you can add that to your page using page properties > metadata section.
http://muse.adobe.com/strategies-for-seo.html
Thanks,
Sanjit

Trying to publish a new site... comes up under my original one :(

I'm trying to publish a new website as I have a family pack for .mac (five domain sites). I originally published my wedding site this past summer and when I try to publish my personal one (for my portfolio) it comes up under the wedding one.
ie: http://web.mac.com/originalsite/newsite
I would like it to just be:
http://web.mac.com/newsite
How do I change this?

If you have multiple sites within one domain each one has it's own address.
Like Tom, I'm a little unclear what you are trying to do.
I would suspect if you have a family pack you would be publishing from the separate accounts and would have separate domain files with one or more sites on each account (one per domain file probably best).
Now your probably as confused as I am.

Trying to Publish my new site. Already own domain through goDaddy. how do I do this? Go Daddy told me to call Adobe.

I have built a site through Muse,
I own a domain with Godaddy, and my current site is through their web builder.
I would now like to publish my new 'muse' site with my existing domain, but can't find the info on how to do so.
Any help?
Thanks,
Hannah

Typical GoDaddy support ....
Where are you trying to publish it to? Back on your GoDaddy hosting or with Adobe Business Catalyst?

How can I publish a new site without republishing all previous sites?

I use iweb for publishing pages of photos on different jobs that I do. However every different job requires a new site and I cannot put up a new site without republishing all my previous sites. This obviously takes a very long time of unneccesary republishing. Is there a way round this?

The reason this is happening is because all of your sites are saved into the same iWeb Domain file. To truly make each of your sites separate and be able to edit and publish them completely independently, you will have to put each site into a separate Domain file. For exisiting sites, you can find instructions on separating your sites into different Domain files from Apnewbie here...
http://web.mac.com/mark8heaton/iWeb/DomainSeparation/
Going forward for new sites and for your multiple domain files, you might find it easiest to use an application called iWebSites that will help you make and manage multiple Domain files...
http://mistergregg.com/cocoadrillosoftware/
Let us know if you have any questions about the process.

Why do I get the question about index.html when I try to publish a new site?

When I try to publish a new or corrected ftp website (anyone) I get a message saying that the file "index.html" already is present on the web and am asked if I want to replace it. What does that mean? I do not want to replace that site, only to publish new ones or repair old ones

Read this to learn about the index.html file :
The concept of iWeb Sites
Replace the index.html file when asked.

Publishing a new site over an existing one ??

PLease someone have an easy answer for a simple question . . .
read this (my) thread then answer the final question please someone !
http://discussions.apple.com/thread.jspa?threadID=878848&tstart=15
so what happens to my existing pages ?
will my new pages auto-replace the existing site ?
does it ask a name or something like that ?
help me before I re-publish, thanks in advance
fiLLbiLLy

hey Mr Froggywoggy, thanks for the communiqué
What do I want to happen ? ... Replace the old site !
In fact it gives me a chance to change my original (boring) site to something a litlle bit more "schnazzy",
so i'm doing a new different site to replace the old one. . ..
you read already that my original domaine site was not backed up,
therefore rendrering it "imposso" to edit of my existing pages.
I want to keep my domaine name -
web.mac.com/phillip_peris
So one final Qu. to keep my head at ease,
you say -
"But deleting those files manually will assure they are gone."
excuse me , but which files ?
All files in the folder, e.g.- photo page files, profile files etc, etc... or just the index.html ? ,
In brief, I just wanna wipe the slate clean and start-over with the new one
I'll do that, roger, will-co, 10-4 big buddy, & thanks dude for the info
fiLLbiLLy
Don't be afraid . . . explore your mind !

After publishing new site, old site keeps showing

I just published a new site, paid and activated it in Business Catalyst WebBasic+ plan, replaced the DNS settings, and the old site keeps appearing.
One funny thing is that in the site manager, all the good files are there but when I try to edit the Hostname record in the dropdown menu of the Homepage the structure of the old site appears ?????. When I publish the site again, the old site keeps appearing.
I cleared all my caches in all my browsers, same result.
Any ideas ?

Good morning Aishvarya,
No everything is fine now.
The issue has been resolved,
Thank you.
Michel

Publish New Site - Mobile Me Log In Error....

I'm just trying to publish a new site created in iWeb via my MBP to MobileMe, however when I try and publish the site, it asks me to sign in (or sign up to Mobile Me). When I select sign in, it takes me to the system preferences/mobileme and it shows me that I am already logged in.
When I go back to iWeb and try to publish the site, it again asks me to sign in.
Anyone have any ideas on this one ?

From a MobileMe support person:
First, please make sure you have quit out of iWeb. Then I would suggest resetting your MobileMe System Preferences. To do this, open the MobileMe System Preference, sign out, and enter a random set of letters and numbers for the MobileMe member name and password, then press the Return key. After you receive notice that the name or password is invalid, close System Preferences, reopen the MobileMe System Preference, and reenter your MobileMe member name (without the "@me.com") and password. Then open up iWeb again and re-publish your site again.
MobileMe live chat support is now 24/7 — see this announcement.

New site won't publish

Someone please help.
I just fininshed my new site but when I go to publish it it keeps going directly to .Mac infomations screen and says publish your site to >mac and asks "Already a member?". When I click sign in then it goes to another screen that has my account name and password already filled in. (The password there already is longer than my regular password). Under that it says sign up now for the 60 trial. and has a "Learn more" button. I already have a .Mac account so why does this keep happening?

Someone please help.
I just fininshed my new site but when I go to
publish it it keeps going directly to .Mac
infomations screen and says publish your site to
mac and asks "Already a member?". When I click sign
in then it goes to another screen that has my
account name and password already filled in. (The
password there already is longer than my regular
password). Under that it says sign up now for the 60
trial. and has a "Learn more" button. I already have
a .Mac account so why does this keep happening?
Has anyone had this happen? Any answers yet? I'm a bit upset what I paid $99 for is not even working for me and it's supposed to be simple!

Just published site - navigation bar doesn't work

Hi Everyone -
I'm brand new here and apologize if I'm about to ask something that's been asked and answered a hundred times. I looked through the questions and found instances where navigation bars are missing once the site has been published, but my issue is different (though the solution may be the same - I don't know).
I just published my iWeb site (www.thewordwise.com) and found a couple issues (my site doesn't fill the screen, but I'll wank about that later). My navigation bar appears properly at the top, but does not work at all. Only the Welcome page is accessible.
In looking through the various missing navigation bar questions posed here, I would hazard a guess that not all of my pages have been properly uploaded to the hosting site I'm using (godaddy) and that the solution may be to use a third party FTP folder? This is unfortunately Greek to me.
Any assistance would be enormously appreciated. Thank you.

I think you'll find that your navigation menu is not working as your image is overlapping with it - The Word Wise image. An image only has to be overlapping a little and it will then not work. Move the image down so that it is clear of the nav menu and it should then work.
As for your site name - the second is your site name in iWeb - you named your site that and you can change it so that it is not as long - do this in iWeb and then republish your site.

I just published my new site

Similar Messages

Maybe you are looking for