I just purchased and upgraded my snow leopard to lion 10.7 the latest one march 2012 and now i can no longer sync my iPhone 4 and iPad..everytime i try it quits (iTunes)...please help, what's the best way yet safe to do to work it again??
what happened to iTunes 10.6 aren't Lion 10.7.3 compatible with it?!
booh rys wrote:
what happened to iTunes 10.6 aren't Lion 10.7.3 compatible with it?!
Completely compatable, I just upgraded my iPhone through it yesterday. But as these are the Lion Forums, you may be better places posting this in the iPhone Forums as well.
Good Luck
Pete
Similar Messages
-
Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad.
For all devices, iTunes says "could not back up ... because a session could not be started".
I'm on w7x64, updated.
I have already tried to re-install, reboot, stop/restart Apple mobile devices service, without success.
Thanks!I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
I've just upgraded from Snow Leopard to Lion. The installation seemed to go OK but on rebooting it is asking where the System Events app is. What is it and where is it located?
ThanksIf the dialogue appeared once, and you cancelled once, the dialogue may reappear when you next log in. For more certainty I suggest a restart of the operating system, then a log in.
If you like: immediately after the problem is worked around, open the Console utility to see whether — amongst its view of all messages — there is an obvious sign of what caused the dialogue to appear. (If you see nothing obvious, don't waste too much time looking.) -
Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????
My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why? -
I just upgraded to Snow Leopard then Lion and the computer shut down after installation.
Now when it starts up it gets as far as the apple icon and then shuts down again
whenever I turn it on it loads that far and then closes.
HELP!Restore your bootable backup/clone or Time Machine backup of Snow Leopard, launch Disk Utility from the install disc, repair the boot volume, and reinstall Lion.
-
I lost my i-tunes online purchase after upgrade to snow leopard...
Hi
I lost my i-tunes online purchases after upgrade to snow leopard...
Is there any way to retrieve them?
Thankskakalos wrote:
you are both great!!!
i found them
it was at the folder you suggested!!!
i am so happy
thanks so much!!!!
Awesome. I had a feeling it could still be there. I'm very happy for you!
Two things you can do now:
1.) Add all of these files into iTunes by using "Add to Library" and selecting the iTunes Media folder. This is the easiest method, but you lose your original iTunes settings, playlists, play counts, ratings, etc.
2.) A slightly more advanced method however will let you salvage your iTunes library and restore it the way it was before. Use finder to look at Music/iTunes/Previous iTunes Libraries. In that folder, check to see if there is one dated near today's date (or when the reset happened to you). If there is a very recent one, you can restore to that date. What you'll want to do is take that file, and MOVE it back up one level to the iTunes folder.
Currently in your iTunes folder is a file named iTunes Library (this is the active, and blank one) and now you should have the dated one as well. You can DELETE the iTunes Library one, and rename the dated one "iTunes Library".
Then hold OPTION while loading iTunes, and when asked to choose a library, select Choose Library, and navigate to Music/iTunes, and pick the "iTunes Library" file you just moved and renamed.
If all goes well, your songs, playlists, ratings, and etc. should all be back to the way it was. Just do "Add to Library" and select the iTunes Media folder to make sure nothing was excluded between the backup and your copy before it reset.
Hope this helps! -
I am new to mac's and have upgrade from Snow Leopard to Lion but......
I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
I came across this online and i want to know is it safe to do this:
Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
Restore your User folder and documents from your backup.
Run Software Update to get everything current, install your apps from your original install media and update those as well.
if any one can help me that would be great, thanks MikeBefore you do that why not do this first:
Repair the Hard Drive and Permissions
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
This will erase the drive so be sure to backup your files before doing this. -
After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?
If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install. -
System freezes when attempting to upgrade from Snow Leopard to Lion
I hope someone can help me out there. I have downloaded the Lion upgrade install program and built an install disk on my jump drive using Lion Diskmaker 2.0.2, but when I tried to upgrade from Snow Leopard to Lion using the jump drive, the install freezes at 24% and I cannot reboot or anything. It just keeps coming back to the install screen. Any suggestions?
This could be due to a number of causes. If you have the Lion installer application, then I suggest you put it in your Downloads folder. Now do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
When you've done the above you should now double-click on the Lion installer application in your Applications folder. When prompted click on the Install button. Note that you will not use the flash drive you made as you shouldn't need it. And, this will avoid any issues with a bad flash drive installer. -
I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.
Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine. -
I have Mac OS X 10.5.8, can I upgrade to Moutain Lion without first upgrading to Snow Leopard or Lion first?
No.
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Mail issues when upgrading from Snow Leopard to Lion
Hello,
I'm hoping someone out there may be able to answer this question or offer some advice. I am being prompted by Apple to move over to iCloud which requires me upgrading from Snow Leopard to Lion. I am extremely reluctant to do this as I have heard of problems when migrating to Lion, especially with Mail. I presently have over 30,000 emails in my inbox. These mails are divided into a multitude of folders all on my mac. I have a mac email account along with other non Apple email accounts (POP) on my Mac. These emails and the folder structure are fundamental to my work so losing any emails or even the folder structure would be disastrous for me. I have of course made a backup (2 in fact) but do like the idea of trying to rebuild everything from scratch. Any advice would be greatly welcomed. Thanks.I'm no expert but at the moment I just woudn't do it as there appears to be lots of unexplained problems with mail and Lion. I have been a Mac user from the earliest days and have never ever had the kinds of problems I am currently having to work around since installing Lion. I wish I had stayed with Snow Leopard.
-
Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?
Click here and install the software.
(71121) -
After upgrade from snow leopard to lion, where is application front row?
After upgrade from snow leopard to lion, where is application front row? i realize it when to use my remote. any one knows about this matter?
OK - Fixed it.
Turns out the cure is to use the Webcal Interface to re-create the delegations. A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed. Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc. -
What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?
What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?
Maybe you are looking for
-
Hi, I am creating one Service order in CRM on Save of this order it will create the Purchase Requision in ECC 6. at same time it will call one BADI in ECC 6. I want to debug this BADI in ECC 6. Can anybody please tell me the way to debug in this
-
Macros in a future version of numbers
I just had an idea about how macros could be implemented in Numbers the "Apple way". I imagine an editor that is similar to Quartz Composer, letting you simply add and connect the functions needed. I mean, we have a great GUI on the Mac and the GUI w
-
Twinview with one monitor switched off
I have a setup with two monitors, one a DVI LCD, which I use as my main monitor, and an older VGA monitor, which I use only occasionally, both connected to an nvidia graphics card. They are easy to setup using nvidia-settings. The problem is I often
-
In DP without process chains we can run the jobs, so my query is why we r useing the process chains in DP & what is the importance of process chains.
-
Is changing my AppleID going to effect my ownership to Lion?
Hi all, Well i'm going through tough time figuring this out, I've created a new AppleID that i'm willing to use as the one and only. i'm having issues with my previous AppleID that's connected to my @gmail account,, well that account is no longer in