I just purchased Compressor for Final Cut Pro X. Won't complete

Hi there
Help please. I was so looking forward to Compressor working simply and effectively. I have an hour video in HD edited in Final Cut Pro x. Pulled down Compressor which I just bought. Every time I try to render it in a smaller compressed file from 1920 to 540 it starts the process but slowly starts off with an estimated completion time of 26 minutes to a day later still going at it and now estimates 48 hours!!!!!! It just gets longer and longer and doesn not complete. I tried numerous different settings and everytime the same result. Driving me nuts. Help please anyone. I will make you a cup of coffee!

HI Duane, it's worth trying to isolate the issues if it is compressor.app. If you have time you might expand a little in your procedure that you are using to use compressor so that others may offertheir advice.
Procedure;
see if the FCPX project is having issues being rendered within FCPX.
determine if you can export a master with FCPX.
see if compresor.app without Qmaster will transcode a distribution
Questions:
Are you using QMASTER? IF not that's a good start to help isolate your workflow issues.
FCPX Have you COMPLETELY rendered out the Storylines in your FCPX project? (do this first... yeah I know BG procesisng)... but try this first before procedding to step 3..
FCPX : WHen this is done (step 2), try and EXPORT | SHARE the project using the DEFAULT codec (Prores??) to a separate MASTER FILE...
Compressor.app: add the MASTER file from Step 3 to compressor.app as a batch and submit WITHOUT using QMASTER (This Computer) to make you new distribution ..
see if you get some satisfaction from the above.
IF you get through these steps then you may elimiate your FCPX project as the error cause and focus on compressor..for any errors (console.app) ..
Lastly, appreciate that FCPX must render some tranistory (intermediate) "master" in order to "Send to Compressor" (if that's what your workflow is) . It will render this first first. Check activuty monitor.app for "promsrenderer" subtasks. THis pre-flight renedering may take time and is managed by FCPX before is appears in Compressor.app. THis is why I ask you to try above procedure first.
If this work or doesn't let this thread know. Yell out if you need help.. plenty on this forum!
(BTW.. my coffee = beans for the Netherlands, ground locally in my machine served super strong with Japanese milk... frothy .. loll
Post your results for others to see.
HTH
Warwick

Similar Messages

NO image , just sound - also for Final Cut Pro users

Hey everybody!!
I am editing a movie on Final Cut Pro, and I use Quick Time 7.1 to capture the clips and source them to FCP. The type of recorder I am using is an HDV, and up to a couple of days ago, things ran smoothly.
Then I started having problems with my Mac, of a different kind, and I had a friend of mine RESTORE my system. After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen. Every time I try to open them a window box appears, telling me that Quick Time is missing some components, and cannot play the clips properly. I tried downloading most of these programms, like Divx and On2, but the clips still can't play. I also tried erasing and re-installing Quick Time, but this doesn't seem to work either.
I must have edited and delivered this video by tommorow, so what do I do??
Please advise.
Thanks.
Stef.

After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen.Sounds like you have "lost" your HD video component package. Try re-installing FCP (or specifically the HDV, AppleIntermediate, and/or DVCPRO HD components depending on "Easy Set-Up" option used for capture).

Final Cut Pro 7 won't complete processing to burn to DVD in Share.

I'm trying to burn four sequences to 4 separate DVDs using Share. The first two worked fine. The third has reached 4 min. 39 sec. of processing time remaning 3 times and just quit or locked up and won't burn to the DVD. Is there something in the sequence I'm not aware of that is causing this?

Larry, this is the FCP X forum. You should post your question in the FCS forum, here ...
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Is there a "Wish List" for Final Cut Pro?

Is there a "Wish List" for Final Cut Pro?
Can we start one? Would it do any good?

For those that are interested HERE is the main feedback page for  which allows you to send  feedback on various products.
This page is useful for anyone who hasn't purchased a product yet maybe because upon researching they've discovered certain features unavailable and they would still like to send  feedback of their concerns. Or you might not own said product but still have an idea for it. I'm just trying to think outside of the FCS2 box here (pun)
So go ahead and send your feedback to  and who knows, you might just make a difference!

Keyborads for Final Cut Pro

I am looking to purchase a keyboard for final cut pro, to make it easier for me to do my editing. I have been looking at LogicKeyboards:
http://www.logickeyboard.com/shop/mac-keyboards-801c1.html
does anyone use these?
Which ones are people using?
Thanks.
side note:
Spoke with the computer store on campus [carnegie mellon university], and they are expecting FCS 3.0 this week and he told me the student price will be $299
Message was edited by: cnolan0111 - spelling corrected

One of the coolest things I have seen on those is the shuttle control (in place of the arrow keys), but you can just buy one of those separately (USB) for a fraction of the cost. And then you still have the arrow keys. I agree that if you just print out the commands and learn them that is pretty much the same as paying a bunch of money for a keyboard that does the same thing. Pretty unnecessary.

Which firewire interface for Final Cut Pro on MacPro?

I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

I saw the Traveller ads in Videography mentioning
time code, so I presumed it had an advantage over
other interfaces.
I found this in some ad copy:
"""The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
For Final Cut Pro use, I'd probably shoot in HDV.
When shooting a green screen near my computer (or
maybe even on-site), I wondered if there would be an
advantage to recording the audio thru an interface
like the traveller.
The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
Do I actually need an interface that provides time
code, or is that only needed for movie work?
I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
Maybe it is simpler just to connect to the mic
directly to the camera's input?
Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion Mac OS X (10.4.8) 2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

MacBook Pro 13" or MacBook Air 13" for Final Cut Pro?

I am looking at buying either a MacBook Pro 13 inch with 8Gb of RAM, 750 GB, and a 2.8 Ghz i7 Processor or a MacBook Air 13 inch with the 4gb of RAM and a 1.8 Ghz i7 processor. Which is better for Final Cut Pro X? I would rather have the Air, but if the Pro is better (which is what I currently have) that's what I will get.

Is it a very noticable difference? Will I REALLY notice it? I know that the Pros are more powerful but I just wanted to factor in the SSD in the Air.

Update for Final Cut Pro 6.0.1

Hi helpful folks,
I just installed Final Cut Pro 6.0.1 on my MacBook Pro. I work at a post production facility, and all the other guys in the shop are running 6.0.4. I was told that what I installed was the same thing everyone else installed. So I ran Software Update. It searched and installed updates for LiveType, DVD Studio, and several other programs. But did not come back with update results for Final Cut Pro. I installed the other programs, restarted, and have since run Software Update three more times. It claims everything is up to date. But obviously 6.0.1 is not the latest version. Any thoughts?

The update to 6.0.5 (6.0.4 is not available from apple any longer) is included in a Pro Apps update or something titled along those lines. It is not named "FCP update".
It can be found here:
http://support.apple.com/downloads/ProApps_Updates_2008005
x

Student Help advice! what is best iMac model for Final Cut Pro and logic pro

Hi
I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
The specs that I have on mine are..
21inch
Upgrades include
Sdd drive 512gb
Intel core i7
16gb of ram
Or
27 inch
Upgrades
Fusion drive or sdd 250gb
Intel core i7
(Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
(Ram is way to expensive so will buy from second party)
Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
My budget is £1900
My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow. Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
You are correct about the issue with the smaller fusion drives. It's one of the reasons I am not high on recommending them. Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance. The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them. I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell. For the most part I assemble my own with OWC Mercury Elite enclosures. In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives. I also have some Seagate Barracuda 7200.xx drives. They all perform excellently and reliably.
Pls. refer to my earlier post for what i recommended to you.

What is the cost for Final Cut Pro if I don't have a previous version to update?

What is the cost for Final Cut Pro if I don't have a previous version to update? I see the $299 price for updates.
What is the brand new purchase price?

Thanks so much. Yes I was thinking on the lines of PwnySlaystation's response.
I appreciate the help.
Will this new version run on OS 10.6.8?
Thanks for the help.

Code for Final Cut Pro 2 not being accepted by FC Studio 2

I upgraded to OS X 10.4.11 from 10.4.2. The FC Studio 2 icon would bounce a few times and stop, but nothing else would happen. 10.4.2 was reinstalled, erasing everything. An attempt was made at starting FCP 2, but the OS is not finding the files necessary in OS 9.
Upgrades Final Cut Pro 4 and FC Studio 2 were made since purchasing FCP 2 as a full package approximately 7 years ago, but FC Studio 2 is not accepting the code for Final Cut Pro 2. How do I correct the problem short of buying the full FC Studio 2 or buying a new hard drive?
Thank you.

It doesn't make sense to me either. As Thomas stated, the crossgrade that required you to send in your old FCP install disc was for Final Cut Studio version 1 (which included FCP 5.1) - NOT version 2. And regardless of the fact that you sent in your install disc, you should still have the serial number for FCP 4. It was printed on two stickers that were attached to the "Installing Your Software" booklet that was included when you purchased FCP 4 (upgrade or full retail versions).
There is NO need to have the old software installed in order to install and upgrade to FCS 1 or 2. All you need is the serial number form the older version; you'll be prompted to enter it during the install process for FCS 1 or 2.
FCP 2 may install on an OSX version, but will NOT run on ANY OSX version - it only runs on a full installation of OS 9.
-DH

Change for final cut pro HD from Pinnacle Studio 10

Hello,
After lots of problems with Pinnacle Studio 10 (windoooooows.....) I finally chose to change for final cut pro HD on Mac OS 10.3.9
So far so good, I did lots of tutorials to learn but there is one very remarkable thing I really miss. Maybe there is just a thing in my configuration to fix...
Is it possible to view a part of a movie without randering it after every simple change? It must be technically possible because studio does it for years now, even with overlays.
Because I just upgraded my ibook with lots of RAM just to try out final cut for the moment, everything runs fine but rendering does take a few minutes/hours.... Well it is ok just to try out maybe I would get a macbook pro if final cut would assure me.
I feel like cutting blind!
Studio renders right before exporting, this may take a few hours but I would do this during night...
As I said, maybe its all my fault and I just have to change some configurations....
thanks for help
Fabi

Make sure your RT settings (upper left menu in the timeline) is set to UNLIMITED RT. This means that the render settings will be adjusted to play back at the best resolution they can without rendering. You might get a green render bar or orange render bar. If you get a red render bar, that means that you have a filter or two that isn't RT and requires a render, or you have too many layers to allow for RT playback.
If you simply drop a raw clip into the timeline and have to render, that means something is wrong. Your clip settings and sequence settings don't match. You need to choose an Easy Setup that matches your footage, then create a new sequence.
Shane

Help for Final Cut Pro X training book.

Hello everyone!
I've recently decided to study to get the Apple Certification for Final Cut Pro X level 1, so I bought the book "Apple Pro Training Series: Final Cut Pro X" by Diana Weynand. Due to a mistake of mine, I bought the edition released on October 2011, knowing later that there is a 2012 version and a new one coming out in just a month.
I'd like to know if I can still handle the exam studying this book released on 2011, or if I necessarily need to get the latest version coming out sooon.
Thanks in advance for your help!
- Alex

I understand. I don't feel like waiting so much time, so I need to choose.
1 - Start studying my old 2011 book since I have it here, and see if I can make it before the exam is updated (I have no idea how much time it'll take me to study the entire book though, even if I study everyday).
2 - Buy the Motion 5 book and get that certification while waiting for the new FCPX book to come out.
3 - Just waiting for the new FCPX book (which means wasting time waiting).
Thanks for your answers and patience.

Keyboard for Final Cut Pro

The new thin keyboard that comes with the Mac Pro is not to my liking.
It continually runs words together when I type because I'm not hitting the space bar effectively. I'm also having to hit the keys harder just to ensure that the keystroke is recognized.
I also miss my ps2 PC keyboard that had colour-coded keys for Avid when I was on a PC.
Can anyone please suggest a usb keyboard that has shortcut keys for Final Cut Pro (latest version) and has extra usb ports (at least one) on the keyboard for the mouse and other usb peripherals and works correctly with a Mac Pro and includes the eject key to open/close the dvd bay doors on the Mac Pro?
Thanks for any advice.

As far as 'color coding' your keyboard, I have had great success with a sticker set from
www.editorskeys.com
I know some people want the 'official' color coded keyboard, but the cost of that compared to $20 for a sticker set is something to consider. I have had my set on my keyboard for over two years and have had no problems ... and I edit 5 days a week, eight hours a day so they have been 'put to the test'!!
good luck
Real McKoy

What are the system requirements for Final Cut Pro 7?

I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
Is there anyway I can find out the system requirements.

Thanks
I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

I just purchased Compressor for Final Cut Pro X. Won't complete

Similar Messages

Maybe you are looking for