I just purchased myself an iPad.  I set it up and now my messages will not work on it.

I need help restoring my messages to my iPad.

The title of your post says "now my messages will not work".
The text of your post says "need help restoring my messages".
Doesn't make sense.
Is this an iMessage problem or Mail problem?
 Cheers, Tom

Similar Messages

  • HT4623 I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

    I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

    Something is wrong with your charger or cable.
    If it works with another charger, then it is not the iphone

  • I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

    I just downloaded Windows 10 and now my headphones are not working and the other caller
    can not hear me.

    Please download and install the driver from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Have just downloaded the new iSO6 and now my facetime will not work. I have checked the settings and all looks fine. Any ideas on how to solve this problem?

    Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • My daughtrts ipad 2 only recognises headphones. and the internal speaker will not work. we have reset the system  three times, cleaned out the headphone jack, and  chrckrd the side switch above the volume. alos we ensured it was not in do not disturb mode

    On our ipad the speaker has quit working. Sound is only heard when you have head phones plugged in. We have reset the system three times cleaned out the headphone jack. Changed languages and rest but nothing works. This ipad is important to our daughter it is her tool to communicate with us and now it is not working please help

    You've done well with troubleshooting so far. Next step would be to back up and then restore from iTunes. Good luck!

  • HT201412 just updated a game on my ipad and now the game will not work stays stuck on one screen how do i unfreeze it?

    just downloaded an update to the game hexagong and when i started to play it it wouldnt move off the first screen any suggestions on how to fix this?

    1. Double-click the Home button to close all Inactive Apps in Task Bar
    2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
    3. Tap the minus sign to close Apps
    4. Tap center of screen to return to Home Screen

  • I just upgraded my iPad to 4.3.3 and now my apps will not open

    The apps blink and will not open.  any thoughts??  Come withs - iphoto, calendar etc. work fine.  thanks for your help

    This problem has been reported here a couple of times. The solution appears to be to download any new App, say a free one. This appears to resolve this problem.

  • I just did the last download for 11.1.4 and now my itunes will not open up cause of errors

    just downloaded last update to Itunes and not it wont open due to errors

    Solving MSVCR80 issue and Windows iTunes install issues.

  • TS1362 just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

    just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

    RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
    With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
    That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
    So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • I just updated my ipad 2 to 5.0 and now my apps don't work

    I wanted to use the mirror function on my ipad 2 with my appleTV and now none of my apps work after the upgrade?  Any suggestions on how to fix this?

    Download one free app, run it and try again.

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I re-start it

    I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I get it to re-start?

    Hi denise mfrompalatine,
    If your iPhone won't turn on, try the steps in the resource below:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    Hope that helps ...
    - Judy

  • Hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. any one like me?

    hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Maybe you are looking for

  • Why wont my old ipod touch sync with itunes 11.3 anymore?

    why wont my 2nd generation ipod touch sync with itunes 11.3 on windows xp?

  • How to SaveAS and SaveAs on different volume in TextEdit?

    i am having a bit of a battle with the new features for saving in Lion and while i /sort/ of get it i am not doing very well in TextEdit. wondering if someone wouldn't mind helping me out. i have created a new document and upon running the first Save

  • How to pass page parameter to report portlet ?

    Portal: 9.0.4 RDBMS: 9.0.1.5.0 OS: Windows REF: How to pass page parameter to report portlet ? Hi, I create a Oracle Report as a Portlet in Portal (create Report Definition File Access and check on the option "Publish As Portlet" in the on the last s

  • Business area ovewrite

    i have business area A i took backup by using exoprt in file menu now i do changes in it. i also generate repoprts and save it in database now i want to replace the A with exisising one now in import i choose file name and i select option rename the

  • Data card that supports mac 10.8.2

    hii...i am from india..i need information about data card that supports mac 10.8.2