I just received my IPad2 3G WiFi yesterday and I tried to email my daughter on it the new product. It recognized my router,but when I typed the quick note, a ,message came up that it was not able to send. So I have to buy a plan with Verizon (my carrier

I wanted to know if I want to email or receive my emails on my 3G Wifi I Pad, do I have to call Verizon and set up a plan to do so. I am new at this and I thought when you were able to pick up WiFi all you had to do is just use your gmail.com to retrieve and send. I guess I need someone to answer me if the I Pad is like my cell phone - where you pay for a data plan. As I said, I am so new at all of this technical "stuff". Please someone HELP ME!
PADDY

You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

Similar Messages

TS1717 I started the download for the itunes update, but before it completed, it said there was an error. I then went to open itunes, and the message came up that it was not installed on my computer. Did I lose everything?

I started the download for the itunes update, but before it completed, it said there was an error. I then went to open itunes, and the message came up that itunes was not installed on my computer. Did I lose everything?

Hello llblake,
Fortunately, the process of installing or updating iTunes should not affect your library. The following articles can help with getting iTunes properly updated and stabilized.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

When I attach USB flashdrive to my new Mac Air no icon appears. I just finished downloading pictures off of old mac and that one worked as expected.The new computer doesn't show anything but when I pull USB out pompts message improper eject. Any ideas?

When I attached my USB flashdrive to my new Mac Air no icon appears and the same when I attached my new superdrive. I just finished downloading pictures off of my old Mac and that one worked as expected. The new computer doesn't show anything but when I pull the USB flashdrive out, a message prompts me with an improper eject notice. Any ideas on why no icon (a disc) appears and how can I get it to?

Open Finder preferences, click on the General icon in the toolbar. Check the boxes for what you want displayed on the Desktop. Click on the Sidebar icon in the toolbar and do the same for what you want displayed in the sidebar.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

In other words, the upgrade process did not go altogether well and the device has lost all its contents. When you plug it in, they will be restored from the backup.

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I downloader all the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

I downloadedall the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

HI There,
It seems that Presenter is not fully downloaded. Please check you have downloaded .exe and .7z files successfully. In case you are still facing the issue then please click on the following link to chat with the support : Chat
with an Expert
Regards,
Mayank

I am trying to download Elements 12. I've downloaded the two parts on your web site but when I run the second part it comes up with a message saying 'The file archive part of Adobe Photoshp Elements 12 is missing...'. What shoudl I do?

I am trying to download Elements 12. I've downloaded the two parts on your web site but when I run the second part it comes up with a message saying 'The file archive part of Adobe Photoshp Elements 12 is missing...'. What should I do?

Hello
I’ve managed to get it to work now but not as straightforward as I’d have liked and difficult to find out how to get help.
Rory

Hi I have just tried to convert a pdf through Adobe Export PDF, it appears to process it, but when I open the word file it just has the lines on it, and no words.

hi I have just tried to convert a pdf through Adobe Export PDF, it appears to process it, but when I open the word file it just has the lines on it, and no words.

Hi nickel13,
What is the problem you are facing?
Is this happening with a single PDF file?
Regards,
Florence

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregon

mikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR

Hello ... I have a problem with a wifi connection speed on my mac pro ... the problem is that in one room the internet opening for the websites is extremely slow ... but when i move the mac pro somewhat to other location ... the internet speed increase

hello ....
my connection problem on my mac pro is :
that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
but when i move the mac pro to another location ... its internet opening speeds up ....
also in one room ... web opening delays .... but on other rooms it is normal
so what can i do to solve this problem ....
Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
thanks for you all ...
Waiting for your support ... as quick as possible ...

WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/

HT1430 I have a new iPad. when I try to open it a message pops up that says ipad not backed up. This ipad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connected to WIFI.

I have a new ipad. Having trouble making it work. when I try to open it, message pops up that says this ipad hasn't been backed up. backups happen when this ipad is plugged in (done), locked (think I did that) and connected to Wi-Fi. (How do I do that?)
thanks
susan

Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

I Have to post data to Odata webservice. In this post I need to pass token header also. I got token value now I have to try to pass Token Header value and Data also but when i do this I'm getting this kind of ERROR: Stream was not readable

try
                byte[] auth = Encoding.UTF8.GetBytes("mobtest" + ":" + "welcome1");
                HttpWebRequest request = (HttpWebRequest)WebRequest.Create("http://Server:8000/sap/opu/odata/sap/ZCUST_TESTING_SRV/post_cust");
                //byte[] byteArray = Encoding.UTF8.GetBytes(postXml);
                byte[] byteArray = Encoding.ASCII.GetBytes(jsonnew);
                request.Credentials = new NetworkCredential("mobtest","welcome1");
                request.ContentType = "application/atom+xml";
                request.Method = "GET";
                //request.Headers["Authorization"] = "Basic " + System.Convert.ToBase64String(auth);
                request.Headers["X-CSRF-Token"] = "Fetch";
                HttpWebResponse responseH = (HttpWebResponse)request.GetResponse();
                xToken = responseH.Headers["X-CSRF-Token"];
                Console.WriteLine("xToken : " + xToken.ToString());
                responseH.Close();
                try
                    HttpWebRequest request_post = (HttpWebRequest)WebRequest.Create("http://Server:8000/sap/opu/odata/sap/ZCUST_TESTING_SRV/post_cust");
                    request_post.Credentials = new NetworkCredential("mobtest", "welcome1");
                    request_post.Method = "POST";
                    request_post.Headers["X-CSRF-Token"] = xToken;
                    Console.WriteLine("xToken POST : " + xToken.ToString());
                    request_post.ContentType = "application/json";
                    request_post.Accept = "application/json";
                    request_post.ContentLength = byteArray.Length;
                    Stream dataStream1 = request_post.GetRequestStream();
                    dataStream1.Write(byteArray, 0, byteArray.Length);
                    Console.WriteLine("byteArray : "+byteArray);
                    dataStream1.Close();
                    Console.WriteLine("datastream1");
                    HttpWebResponse response1 = (HttpWebResponse)request.GetResponse();
                    Console.WriteLine("Post response : " + response1.ToString());
                    dataStream1 = response1.GetResponseStream();
                    StreamReader reader1 = new StreamReader(dataStream1);
                    Console.WriteLine(" Console.WriteLine(reader1 : " + reader1);
                    string responseFromServer1 = reader1.ReadToEnd();
                    Console.WriteLine(" Console.WriteLine(responseFromServer1 : " + responseFromServer1);
                    Console.Read();
                    reader1.Close();
                    dataStream1.Close();
                    response1.Close();
                catch(Exception exp)
                    MessageBox.Show("Post Error : "+exp.Message);
            catch(Exception ex)
                MessageBox.Show("Error : "+ex.Message);

Hi Ashwin,
                  That is C# windows application below i mention the XML data and Code also.
string postXml = @"<?xml version='1.0' encoding='UTF-8'?>"+
"<entry xml:base='http://serverip:8000/sap/opu/odata/sap/ZCUST_TESTING_SRV/'\n"+"xmlns='http://www.w3.org/2005/Atom'"+
"xmlns:m='http://schemas.microsoft.com/ado/2007/08/dataservices/metadata'"+
"xmlns:d='http://schemas.microsoft.com/ado/2007/08/dataservices'>"+
"<content type='application/xml'>"+
"<m:properties>"+
"<d:Kunnr>800DUR298</d:Kunnr>" +
"<d:Land1>avi</d:Land1>" +
"<d:Name1>dur</d:Name1>" +
"<d:Name2>ven</d:Name2>" +
"<d:Ort01>chennai</d:Ort01>" +
"<d:Pstlz>500060</d:Pstlz>" +
"<d:EStatus>X</d:EStatus>"+
"</m:properties>"+
" </content>"+
" </entry>";
try
                byte[] auth = Encoding.UTF8.GetBytes("mobtest" + ":" + "welcome1");
                HttpWebRequest request = (HttpWebRequest)WebRequest.Create("http://Server:8000/sap/opu/odata/sap/ZCUST_TESTING_SRV/post_cust");
                byte[] byteArray = Encoding.UTF8.GetBytes(postXml);
                request.Credentials = new NetworkCredential("mobtest","welcome1");
                request.ContentType = "application/xml";
                request.Method = "GET";
                request.Headers["X-CSRF-Token"] = "Fetch";
                HttpWebResponse responseH = (HttpWebResponse)request.GetResponse();
                xToken = responseH.Headers["X-CSRF-Token"];
                Console.WriteLine("xToken : " + xToken.ToString());
                responseH.Close();
                try
                    HttpWebRequest request_post = (HttpWebRequest)WebRequest.Create("http://Server:8000/sap/opu/odata/sap/ZCUST_TESTING_SRV/post_cust");
                    request_post.Credentials = new NetworkCredential("mobtest", "welcome1");
                    request_post.Method = "POST";
                    request_post.Headers["X-CSRF-Token"] = xToken;
                    Console.WriteLine("xToken POST : " + xToken.ToString());
                    request_post.ContentType = "application/xml";
                    request_post.Accept = "application/xml";
                    request_post.ContentLength = byteArray.Length;
                    Stream dataStream1 = request_post.GetRequestStream();
                    dataStream1.Write(byteArray, 0, byteArray.Length);
                    Console.WriteLine("byteArray : "+byteArray);
                    dataStream1.Close();
                    Console.WriteLine("datastream1");
                    HttpWebResponse response1 = (HttpWebResponse)request.GetResponse();
                    Console.WriteLine("Post response : " + response1.ToString());
                    dataStream1 = response1.GetResponseStream();
                    StreamReader reader1 = new StreamReader(dataStream1);
                    Console.WriteLine(" Console.WriteLine(reader1 : " + reader1);
                    string responseFromServer1 = reader1.ReadToEnd();
                    Console.WriteLine(" Console.WriteLine(responseFromServer1 : " + responseFromServer1);
                    Console.Read();
                    reader1.Close();
                    dataStream1.Close();
                    response1.Close();
                catch(Exception exp)
                    MessageBox.Show("Post Error : "+exp.Message);
            catch(Exception ex)
                MessageBox.Show("Error : "+ex.Message);
Message was edited by: jitendra kansal
Message was edited by: jitendra kansal

TS1717 I can get on my itunes but when I go to update it has an error saying that I can not connect to update server. Any suggestions

I can get on my itunes but when i go to check for updates it has an error saying that I can not connect to update servor. I checked my firewall and Itunes is checked for exceptions, any ideas

See if this helps:
Trouble installing iTunes or QuickTime for Windows

My new ifone has detected my internet router but when I enter the network key info it cannot allow me to join the wifi

My new ifone 4s has detected my internet router but will not recognise the network key and therefore will not allow me to join the internet. Can anybody help?

Reboot the router by unplugging it for at least 30 seconds, then plug it back in and try it again.

I just received my IPad2 3G WiFi yesterday and I tried to email my daughter on it the new product. It recognized my router,but when I typed the quick note, a ,message came up that it was not able to send. So I have to buy a plan with Verizon (my carrier

Similar Messages

Maybe you are looking for