I just replaced my iPod a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. Ive tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this?
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
This IS the 64 bit version of iTunes! It won't recognize my phone! I've reinstalled iTunes, restarted both the computer and the phone, and still can't fix it!
What computer do you have? is it 32 or 64 bit operating system?
-
i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
Where, EXACTLY, did you get this phone? -
My Ipod touch 2nd generation was working fine until I tried to charge again from my PC,when I connected the Ipod was getting too hot and smelling like burn cable,the screen turn black and doesn't work anymore. any ideas about what happen?
You can try here:
iPod touch: Hardware troubleshooting
However, from your discription, I suspect that something is broken. Maybe a dead battery. In that case. I would make an appointment at the Genius Bar of an Apple store and see what they say. -
upon downloading firefox I added speed dial . It was working fine for a couple of days but yesterday when I opened up firefox which I made as a default browser because of the speed dial it no longer appears even though it is still appearing as one of the extensions and is enabled
Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org]. -
Is anyone else having problems with their screen saver not turning on? My was working when I first bought the lap top. Then it stopped activating, I could get it to come on from a hot corner, or if I powered off the lap top and the next time I would boot on it would work for a few days but then it would stop. Made an appointment with the Genius bar and they suggested to wipe clean the HD and re-install the software Mountain Lion. Which was done. It worked fine for a few weeks, now it has stopped again, and I can not even get it to stay on by activating it from the Hot Corners.
Anyone else having the same problem? And if so what have you done to try and correct it? Apple ran a check on my MacBook and they said there is nothing mechanically wrong with the MacBook that it is the software?????Back up all data.
Triple-click anywhere in the line below to select it:
pmset -g assertions
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot. -
I have an apple2 for about 3 months and everything was fine,but now when I try to access safari it doesn't open what can I do
Have you tried a "hard reset"? If so, I would take the phone to an Apple store. If not,
1. Make sure the phone is OFF
2. Hold the HOME button and then press the power button and HOLD IT.
3. Hold both buttons until the phone comes ON, goes OFF and come ON again (about 45 seconds)
4. Re-sync with iTunes.
Hope this helps. -
It doesn't start when I want it to and I have to use Chrome. Is it a problem with my computer or Firefox?
So you did a force quit and now you are trying to start it again right?
If so and the "beachball of death" is still spinning, deny the machine it's power source, remove the power cord and the battery and any periphials you have plugged in ie: extra drives etc. Let it rest for a minute plug it all back in then try re-starting in safe mode. If all is well shut down and restart normally.
If you get this far repair the disk and permissions using Disk utility.
Hope this helps
here is a link for the safe mode start-up: http://support.apple.com/kb/ht1455 -
ow do I recover a Pages file lost because Mac Air start up disc was full and couldn't autosave?
Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.
-
Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?
Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml -
ipad was working fine then when i went to use it again a few mins later it wont do nothing screen is just black an ipad is charged any info on wha problem could be iv only ad the ipad 3 months from new
Yep re set my iPad an is working fine now cheers
-
Help! We set up family share a few weeks ago, and it was working fine with the organizer and two additional members. The three of us could see each other on app and iTunes stores and could view each other's purchased items. Then ... All of that disappeared. We cant see each other's profiles any more and we definitely can't view any purchased items. In addition, when we try to go in and jump start by downloading a free app or logging out and back of itunes, nothing works. It seems to show we have family sharing in the iCloud settings, and when we click the Apple ID it asks us to confirm, and we confirm, and are asked if we want to change accounts because then we trigger the 90 day freeze period. And we aren't changing any accounts - just trying to confirm the same accounts to get family share to work! We are all on the same ios 8.1.3 and os, so I don't know what else to try!
No, I am a media professional who uses his MacBook Pro to connect to external monitors, and needs to continue to do so. I don't want Apple TV. I want my laptop to work again, like it's supposed to. Like it used to.
I have a demonstration this week at work that requires me to plug into an LCD screen and I am hoping to have this resolved by then. I am trying to convince my department to buy a Retina Mac and thousands of dollars worth of video software for live shows, and if I can't make it work, then I can't exactly convince them (or myself) to buy what I have been researching.
Again, I don't want wireless video or Apple TV. I don't want to buy any more stuff. I want to know why my Thunderbolt to HDMI cable stopped working after my update, and how to fix it...preferably before this meeting. -
I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page
StagLemoore wrote:
Thank you everyone for your suggestions and help. Ended up logging out of my apple ID account. Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly. I then logged back in, and now all my purchased and rentals are available which makes sense. I guess with the update there was some weird bit of trons that required one to log out then back in. Probably doing a rest in between may not hurt for some. Thanks again for all the assistance. Cheers.
It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating -
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
-
I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom
Maybe you are looking for
-
How do I log the time in hours, minutes and seconds to a table
Hi I'm a relatively new user of Labview. I am currently writing a program that logs the temperature of an oven and the current time to a table and graph. I am using a GPIB card to communicate with the oven. I have used the Get Date/Time string to get
-
Formating problems when printing from googlemail text program
I often use the text program in my google mail account to write letters. However when I click on print preview the format is altered in an undesireable way. How can I avoid such unwanted format changes?
-
How to cleanup the "custom" genre list
The genre custom list is very large and has many in there that I don't use or want. Is there a way to remove some of these? Thanks!
-
Main-args in executable Jar file. Possible?
Hello all! Is it possible to specify arguments for the main class of an executable jar file? If you call it on the command line this might be possible but what to do if you start the jar with double click? Any chance?
-
Where can I find my Mac's computer name? Thanks.