I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.
I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Got a black screen on the iPod Touch 4th Generation. Tried restoring it and holding the lock and hold buttons but this didnt work. Do i need a brand new screen?
If you successfully restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem. Could be the screen or something else.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens. Can't slide the power off either. It tells you the time, unlock button, power off button but nothing happens. Voice just tells you the unlock button, time, poweroff button.
Please help also itunes says I need to enter on iPod the passcode to reset to factory. I can't get it open to enter passcode, slider doesn't work. It is one day old and this happen xmas afternoon. PLEASE Help someoneTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!
Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network. -
The bottom part of my iPod Touch screen isn't responding but I can slide to unlock the screen and slide the icons at the bottom but I just can't click on them, anyway to solve this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out. Is there a better way to smooth skin?
Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
Neil -
Hello, I have a 16GB Ipod touch that is 3 years old. i am trying to add shazam on it but it is telling me that the application requires the iphone 3.0 software update, any help? Thank you!
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
-
My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?
All iPhones require a SIM for activation.
Insert a SIM in the iPhone. -
hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?
- Have you tried going to the developer's support website/contacting the developer?
- Try a reset. It surs many ills and nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.
If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I tried updating i tunes yesterday and got ....ERROR 7 (windows error 126) and now cant access i tunes at all ?
-
How to post a discount from supplier in AP Credit Note
Dear Experts, I have posted an AP Invoice that buys an item for $10, then my supplier gave me a discount of $2 and Im supposed to open a Credit Note for him for this discount. How can I key this scenario on a Credit Note so that my cost can be captur
-
Appleworks won't launch in Tiger
I just upgraded to Tiger and downloaded the update to 10.4.3. Now I can't even launch AppleWorks 6.2.9 at all. All I get is the spinning lollipop and the "not responding" message in the Force Quit dialog. I've tried repairing permissions, but that ma
-
Glibc error when installing OEL 5.8 packages for 10g install
Hi, I have the following errors occurring when installing the pre-requisite packages for a 10g install. I'm following the instructions on http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php file /usr/lib/gconv/libISOIR165.so
-
I imported photos but iPad won't allow me to delete some why?
How can I delete them to free up memory?