I just see ok to disconnect and disk mode ?

i just see ok to disconnect and disk mode in my newipod nano how can i make it start???

I have this on mine after I charge the battery, which takes putting it into disk mod as I explained in the other thread "Itunes doesn't recognize my ipod"
I have to reset and it works. It can't be good to be constantly doing this though, I would assume.
I'm really getting ticked at these problems since the upgrade. There are 4 nanos in my house, all bought since Christmas, and I don't think we'll ever be buying another unless apple gets it's act together.

Similar Messages

I changed my password on Airport Express and now can't connect in iTunes. It does not ask for password ,I just see trying to connect and it fails. How do I enter new password in iTunes when it just keeps trying to connect ?

When I select the Airport Express as Remote Speaker in Itunes I just see trying to connect and it can't connect.
I changed my password on the Airport and I don't see where I can put in the new password in Itunes.
This problem is on my Imac. On my Mac Pro a window came up asking for password to connect because it was the first time.
I can connect on the Mac Pro but not my Imac.

Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

HT1363 iPod Classic and Disk Mode

I have a 5th generation iPod and I can't seem to get it to into disk mode. I've tried to complete the mentioned process on a flat surface and still no luck. I have a lot on my device and I'd love to be using it. Any ideas would be appreciated. Thank you!

Did you see the Apple logo, after 6 secs?
When you put it in Disk Mode, you are using it as a Portable Hardisk, so I can't get what you meant by this statement,
I have a lot on my device and I'd love to be using it.
In Diskmode, you cant play music or watch video or Podcast
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".

Flashing Apple,Exclamation Point, and Disk Mode Signs

Nano will only go into disk mode when plugged into a 12 volt receptacle.When plugged into computer USB nano will not go into disk mode.It will only keep flashing apple logo, folder w/ exclamation point, disk mode signs repeatedly.Computer will not recognize nano.

See these.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
You should put it into disk mode before you connect to the computer.
Putting iPod into disk mode.
iPod shows a folder icon with exclamation point after disconnecting.
iPod shows a folder icon with exclamation point when you turn it on.

IPod and disk mode

I've had my 30gb iPod for just barely over a year, and just recently it's started freezing while it's playing. I reset it and then plug it into iTunes and after a while it will just come back up. The problem is that unless it's plugged into the computer at all times, it'll just go into disk mode. It will no longer turn on without going into disk mode at all. I've tried restoring it through iTunes, but every time I do it brings up some message telling me it can't do it.
Can anyone help me fix it? I know it still works, I just want it to stop going into disk mode all the time.

The sad iPod icon is usually indicative of a hard drive problem.
If none of the normal troubleshooting steps work (particularly if you can't force it into disk mode), it needs service.

Stuck in 'Ok to disconnect' in disk mode

I have 120gb classic. When I connected it to itunes, it is not recongized. So I'm trying to restore factory settings, but when i go into disk mode it's stuck on 'OK to disconnect'. HELP!!!! What do I do to get rid of 'OK to disconnect' so i can get to the summary menu.

I broke down and set a time for apple to call me. It's going to cost me,but at this point the ipod is useless. They will not be calling me until next week. I'll let you know what they said. I Really cannot BELIEVE that i have to pay to talk to someone and I have to wait a week!!!!

My Ipod Nano screen says ok to disconnect ans Disk mode at the top!

My Nano says Disk mode at the top and ready to disconnect at the bottom. How can I resaet it or get back to the opening screen?

the same thing happened to mine... try reseting it by pressing the menu button and center button at the same time.

Exclamation point and disk mode

Hi there, I dropped my ipod mini a few days ago and it worked fine until today. A folder appeared on the screen with an exclaimation point on it with the web address to go to for support. As per the manual, I re-set the ipod. This has put the ipod into disc mode (there is a large tick on the screen). I looked on the forum and saw that to rectify this you need to re-set the mini (i tried this but nothing happened).
I then referred to the manual and it advised me to re-store the ipod. I did this, however, it took me back to the scrren with the exclaimation point. Again, I re-set the ipod and I am back to the disc mode screen as above.
Does anyone know what I can do? Thank you for taking the time to read this.
best wishes

For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”

Can't see or send photos! I just see a white image, and when I send a photo, it just sends white squares

Since last update, when I open my photos, they change to white. I can see them on the grid, but if I try to open them, they change to white. If I try to send a photo, it just sends white squares.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Not installing, just see Waiting... and Finishing...

I thought it had installed but it seems to have "stalled"!
Is there something I am doing wrong?
Thanks.
Robert and Laura
Windows 7

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Sync and disk mode questions

I recently synced all my Outlook 2003 business contacts into my 1st gen Ipod touch 16g. I also recently had a crash that wiped my outlook contacts. I had not backed up recently so I only saved about half of the ones I need. However, all of them are on the Ipod. How can I get them back into my Outlook without scanning each and every one back in (@300).
Next.
In syncing contacts and calendars with Outlook 2003 what is the protocol? If I change the Ipod will it update Outlook upon sync and vice versa, or will only one act as slave?
I'm new. I am sure this has all been covered but I am stuck. Thanks in advance.

As long as your Outlook has one contact and one calendar entry in it, you should get the option to merge the data when syncing.
It will sync both ways.
http://manuals.info.apple.com/enUS/iPod_touch_2.2_UserGuide.pdf

Imac wont boot, stuck loading, all i see is apple logo and spinning cycle

My 27 inch iMac wont boot, i am runnign snow leopard. I just see the apple sign and the cycle spinning meaning its still loading. I cant use disk utility because leopard install disc wont boot, also i cant run any commands in single user mode, doing /sbin/fsck -fy does nothing, i dont see a # sign or anything, whatever i type it doesnt matter whenever i hit return the cursor just goes to the line below.

dudix wrote:
I cant use disk utility because leopard install disc wont boot
Power down (assume you have already tried the SMC reset) and insert the Applications DVD that came with your new iMac. Boot up while holding the "D" key down (may be best with a wired keyboard) to run the Apple Hardware Test according to these instructions:
http://support.apple.com/kb/HT1509

Ipod Classic says it needs fixing when connected. Won't connect in disk mode

I've just added all my music to a new memory stick and attempted to sync my ipod classic 160gb for the first time in about 5 years. However my laptop froze not long after it started and I had to restart the laptop.
Today I've tried syncing it again but every time I plug it in it says it needs fixing. I tell it to fix it but either it does nothing, or tells me it can't be fixed as another program is using it (even though all other windows are closed). I've tried restarting it by holding down the select and menu buttons but that didn't help at all. I then put it into disk mode as I read I could then select it in itunes and restart it. It just says 'ok to disconnect' and won't go to 'do not disconnect' or show up in itunes, and sometimes comes up that it needs to be fixed but can't as the disk can't be found.
The iPod itself still seems to be perfectly usable, and has all my old music on it.
I've looked at loads of things on google but none of it helps.

I've just added all my music to a new memory stick...
How is the "new memory stick" related to this problem? Does it have ALL of your music, including the music that is currently on the iPod?
Do you use a Windows PC or a Mac?
Is the latest version of iTunes installed, or do you use an older version?

IPod freezes iTunes in normal mode, will not restore in disk mode

Several days ago, I began having problems with my iPod. When I attempted to sync some podcasts to it, I got an error message saying "iPod cannot be synced. Error -48." I was still able to play the music on my iPod, but I would get the same error every time I connected it to my computer. I downloaded the latest version of iTunes and restored it, thinking this would solve my problem, but when I put music on it it became really glitchy and the album art was messed up. I once again restored it and encountered the same problem. Eventually when I plugged it in, iTunes would freeze and become non responsive until the second I unplugged the iPod. I put it in disk mode and tried again. This time iTunes did not freeze, but when I tried to restore I got an error message saying it was unable to do so. I tried to manually reformat it through "My Computer," but when I tried it in normal mode it froze, and in disk mode it said it was unable to reformat Removable Disc (E:). I have tried repeatedly to find a solution, tried hooking it up to different computers, but it seems the problem lies with the iPod. I am utterly at a loss for ideas. Any help would be greatly appreciated.

I just barely tried restoring it in disk mode again on another computer, and was told something new: "firmware is corrupt. Disconnect and reconnect." I've tried it twice and it tells me the same thing after taking a half an hour to download the update.

Can't exit Target Disk Mode

I tried to login to my brand new iMac (running Lion 10.7) via Target Disk Mode so as to transfer my data from my old machine. However, the passwords didn't work. This is not a disaster, however, I am now unable to exit Target Disk Mode. I have tried removing RAM and restarting holding down alt+cmd+R+P to reset the PRAM but it just goes straight back to Target Disk Mode. No matter whjat I do it goes back to Target Disk Mode with the padlock and opassword box. Any ideas anyone? Thanks very much.

Is it a USB or wireless KB?
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
nvram boot-args=""

I just see ok to disconnect and disk mode ?

Similar Messages

Maybe you are looking for