I just selected the option to install mavericks and my laptop restarted

Ok my screen is stuck at this and I can't even scroll or see what's going on. Can someone please tell me what's going on ? Should I wait it out ? Or find a way to restart my laptop because this is probably the worse choice I have ever made .
[IMG]http://i57.tinypic.com/2645e34.jpg[/IMG]

You are a genius. Thanks lol
[IMG]http://i62.tinypic.com/b49v7c.jpg[/IMG]

Similar Messages

When installing Maverick on my 17" Macbook pro I got the message that my HD is damaged and can't be repaired. I now can't restart without simply repeating the attempt to install Maverick and thereby returning to the same message. How do I abort install

When installing Maverick on my 17" Macbook pro I got the message that my HD was damaged and couldn't be repaired. (not good news!!) I now can't restart without returning to the Maverick setup and therefore returning to the same message. How do I abort the Maverick installation so that I can try to return to the previous OS so that I can try to recover/repair the HD

I have the same problem with my 2008 MacBook. Repair disk from disk utility says it was successful but the installer thinks it's groundhog day after a reboot. I also tried fsck -fy after booting in to a command mode and it came back clean but again the installer gives the same error message. It seems like a bit is stuck somewhere indicating my HD is bad when it isn't.
I had the latest version of Mountain Lion and have applied every upgrade up to then without issue.
Anyone find a solution yet without having to erase the entire disk and staring over?
Attached is a screen shot of the error.

Just done the latest i tunes update and after a restart i tunes will not open

just done the latest i tunes update now it wont open

For the most thorough discussion of the iTunes issues see the user tip: https://discussions.apple.com/docs/DOC-6562

I started Boot Camp on a MAC mini but then had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk Can I recover?

I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?

Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

HT1338 I am attempting to update to the new os x mavericks and while completing the download it prompts me to choose a disk. I have chosen the only option I am provided and am then told that the update cannot be installed on "untitled 1" what am I suppose

I am attempting to update to the new os x mavericks and while completing the download it prompts me to choose a disk. I have chosen the only option I am provided and am then told that the update cannot be installed on "untitled 1" what am I supposed to do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the installation again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What shou

Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.

No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton

Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday

Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!

If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
           be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
              to opt for that.
          Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible
                    because it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
              Click on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

If the Mac's firmware was updated, you can try this Internet Recovery:
Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
If the firmware was not updated, then you can use the SL install disk.

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Windows 8.1 installation select the driver to install

Hi,
I am trying to install windows 8.1 64 bit onto my late 2012 mac book pro retina using the latest version of Maverick.
I have used bootcamp assistant and am installing window 8.1 from a Microsoft created disk.
After progressing through the partition and initial installation without any issues, I have reached a point during the "collecting information" phase and a windows set up dialog box has appeared asking me to select the driver to install.
I have browsed the USB with bootcamp 5.1 on it and the windows disk and "rescanned" but i get a "load driver" dialog box that reads:
"No device drivers were found. Make sure that the installation media contacts the correct drivers, then click ok"
Where will find the correct device drivers if not on bootcamp 5.1 or the windows disk?
I have successfully installed another copy of windows onto an iMac and didn't encounter this problem.
Thanks for any help anyone can give me.

Hi,
Try
HP Printer wizard
http://ftp.hp.com/pub/printers/hppiw/hppiw.exe?jumpid=ex_r4155/hho/ipg/ccdoc/piw/
Download and Run the HP Windows 8 Printer Install Wizard
Regards

Why, when selecting the options box in the tools tab, does the whole page become unusable???? I cannot set my homepage at all.... very annoying..

On Saturday I upgraded to version 10 beta, after installing the version, the options box in the Tools tab will not function. When selected the screen is "blocked out" and the only way forward is to Ctrl+Alt+Del to reset the browser.
I have tried several times to re install but the settings are dragged into the new version. If this keeps on happening I will revert to the original browser.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why is my WD My Book for Mac not showing up on the finder after installing Mavericks?

I recently upgraded to Mavericks. I have a WD My Book. I had received emails from WD stating that the software from WD had to be removed from the Mac before installing Mavericks. So I waited until I received an email from WD saying they had resolved the issue. I upgraded to Mavericks and used the new Drive Manager and SmartWare software from WD. The software (WD) recognizes my iMac, but the WD My Book does not appear through their software or in the Finder on my iMac.
I've called WD twice and it seems they have no idea what to do. They replied with an email for software to recover my files. But I can't even see the files on the My Book drive to recover them. Is this a Mavericks issue? Do I need to download something from Apple? I don't think the issue is to recover files. It's just that the iMac is not recognizing the drive at all.
Help!
Thanks,
Jose.

WD new software and firmware is having serious issues.
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
DO NOT use HD software
nobody should do that.

I just selected the option to install mavericks and my laptop restarted

Similar Messages

Maybe you are looking for