I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

Hello, do you have another admin account to log into for a test?

Similar Messages

  • WhenI make changes to website, published site does not recognize

    Recently I added Pay Pal to my site. Then when I vistied my site I found some of my edited pictures looked as though they had both prior "masks" and current.i.e. oval now looks like oval and square. I even went back and re-ddi the picture edits. They look fine in the edit iweb page, but not the published page.HELP! please.
    Denis

    i wasnt sure to whether to start a new topic or not but i am having the same difficulty. Here is my problem and information. Any help would be brilliant.
    Computer:Macbok Pro, OSX 10.6.8
    iWeb version 3.0.4
    Mobile me
    Everything works perfectly, except one slight glitch when modifying changes in iweb and i publish my saved site to my mobile me hosting (via safari), the published website does not show up like my saved and now published iweb website??
    I contacted mobile me, who said "unfortunately that's not actually a publishing issue. This is going to be more along the lines of your settings within iWeb itself. As a MobileME/iCloud agent, I can only assist you in making sure your website publishes correctly. For assistance with the actual iWeb Application, you will need to contact iWeb support directly."
    This would be fine although i no longer have apple support in my account, so im stuck. Other changes are showing on teh online site? its just one change which is my navigation menu is showing on two lines instead of one as it is on my iweb application. I have had no error messages come through when publishing my site.
    I do not want to re-upload iweb as it works perfectly apart form this, but if it wont change this what will it not change next. Also i have other sites saved on my iweb and i dont want to lose them if u were to install iweb again, not that i'd even know how to.
    Any help would be really appreciated, thanks guys.

  • EHPI  does not recognize SIDADM password

    EHPI does not recognize SIDADM password while installing EHP4 with a ECC 6.00 EHP4 upgrade on AIX 6.1 ( 6100-05-03-1036)
    and Oracle 11G using EHPI tool version SAPehpi_98-10005805
    Applied SAP note 927637 - still it does not work, please help
    Getting error as below in SAPehpi.ECO file
    Phase INSTANCELIST_PRE:
    BLOCKED SIGNALS: ''
    SAPehpi> Starting subprocess 16711916 at 20111120073046
    ENV: DIR_LIBRARY=/usr/sap/SID/DVEBMGS00/exe
    ENV: JAVA_HOME=/usr/java14_64
    ENV: LIBPATH=/usr/sap/SID/DVEBMGS00/exe:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64/server:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64:/usr/sap/HRP/EHPI/jvm/jre/../lib/ppc64:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64/jli:/usr/sap/SID/EHPI/jvm/jre/../lib/ppc64/jli:/usr/lib:/opt/CA/CAlib:/opt/CA/SharedComponents/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/usr/sap/SID/SYS/exe/run:/oracle/client/10x_64/instantclient
    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
    ENV: ORACLE_BASE=/oracle
    ENV: ORACLE_SID=SID
    ENV: PATH=/usr/sap/SID/DVEBMGS00/exe:/usr/java14_64/bin:.:/u/hrpadm:/usr/sap/SID/SYS/exe/run:/opt/CA/SharedComponents/JRE/1.4.2/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java5/jre/bin:/usr/java5/bin:/usr/seos/bin:/opt/CA/SharedComponents/bin
    ENV: SAPSYSTEMNAME=SID
    ENV: auth_shadow_upgrade=0
    ENV: dbms_type=ORA
    ENV: dbs_ora_schema=SAPSR3
    ENV: dbs_ora_tnsname=SID
    EXECUTING /usr/sap/SID/DVEBMGS00/exe/sapcontrol (/usr/sap/SID/DVEBMGS00/exe/sapcontrol) <args>...
    20.11.2011 07:30:46
    AccessCheck
    FAIL: Invalid Credentials
    Process with ID 16711916 terminated with status 1

    Thanks for your quick response.
    Yes , password has been changed recently after the SAP installation , not during EHPI installation, I have started EHPI  with the new password of EHPI.
    I am running this on AIX 6.1 hacmp HA environment
    The system is running in a distributed environment. To be able to proceed, the <SID>adm user will be utilized. Enter the password for the <SID>adm user. In case you are using a Windows domain user, please enter the domain user password.

  • My iMac does  not recognize my password? What can I do?

    My iMac does  not recognize my password? What can I do?

    If you mean a system password, see this article http://support.apple.com/kb/HT1274

  • Trying to send pix in iPhoto and get message email server does not recognize username/password combination.

    apple message when trying to send an email " email does not recognize username/password.

    Go to iPhoto's Accounts preference pane, delete the email account and add it back. 
    The better solution, IMO, is to set Mail as iPhoto's email client in iiPhoto's General preference pane.  That gives you better access to your Contacts, a sent copy and templates similar to iPhoto's in the stationary section of Mail.

  • ICal error:  Server does not recognize your password

    Today I opened iCal on my iMac and I get an immediate error message saying that the "server does not recognize my password for my user name and says to make sure that it's entered correctly." I went to MobileMe in System Settings and everything was OK. I was able to see it on the MobileMe website but it still gives me the error message when I open iCal.

    Today, I had this exact same issue. What helped was quitting iCal, deleting the cal.me.com password in keychain, starting iCal again, then entering it again in iCal preferences. It started syncing right after that.
    People who don't have the cal.me.com password should check their general mobile me settings.
    Ghostlarke: if you sync your calenders, you ARE using MobileMe.

  • App store does not recognize my password

    app store does not recognize my password, even after I walk through the security questions, and use the link apple sends to my email.....

    Hi furiales,
    I apologize, I'm a bit unclear on the exact nature of the issues you are describing. If you are having issues connecting to the iTunes Store or App Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • Time Machine does not recognize my password. Can I change or delete?

    Time Machine in my MacBook Air does not recognize my password. Can I change or delete?I'm connected to an auxiliary disc via a USB connection and power is present for both devices.  No Backup started after disc encryption and now the external disc drive can be used since the password I started with can not be used to unlock it.  Am I missing something or am I just out of luck with this external drive?

    I had already done this to no avail.  I'm wondering if I'm confusing the password to unlock the external device with the password to encrypt the disc used after it was connected to the MacBook.  If so, there is no way I can recall a password for a device I bought a decade ago (pre increased security about identity theft, etc.).  So maybe the answer is to secure a new device.

  • Password manager does not recognize windows password

    My password manager does not recognize windows password and I get a 'verification failed' after I swipe my finger.
    My finger print is recognized just fine, its the windows password that does not sync with the password manager since I had to change my windows password.
    What do I do?
    Rob

    I have the same issue   any help appreciated

  • I am now able to receive emails in MAIL, but Yosemite's Mail program does not recognize any of the server's connections that have worked for years!  What do I do next?

    Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, !  What do I do next?

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    iForgot.com

  • My netgear router does not recognize my password and i cannot access it with my iphone

    My Netgear DG834PN router does not recognize my user name or password when i try to access WI FI with my iphone.I cannot get wifi on my iphone from this or any router. The router is a wireless and hardwired unit.

    Is your password by any chance in Hex? (all numbers or letters a through f) If so you may be able to translate the hex into ASCII or you could change to an ASCII password. I had to make that kind of change. Good luck.

  • Iphoto does not recognize email/password combo

    I'm trying to email some pictures but it keeps saying that iphoto does not recognize my email or password combinations for both mine and my husbands accounts.

    Have you got iPhoto as the email client or Mail?  If iPhoto go into iPhoto's Accounts preference pane, deelete the email account, reboot, relaunch iPhoto and add the account back. Then try again.
    Or, set Mail as the email client in iPhoto's General preference pane. It's a better way to go, IMO, as you have better access to Contacts, get a sent copy automatically and also have photo layouts to use in the Stationary/Photos section of Mail.
    OT

  • Time Machine restore does not recognize sparsebundle password

    I am trying to do a time machine system restore from an encrypted sparse bundle. I have a mac with OS X 10.10.2 and the sparse bundle is on a time capsule. I rebooted with cmd+R and selected “Restore from a Time Machine Backup”. I was asked for the time machine password and then selected the sparse bundle I wanted to restore. At that point I was asked for the sparse bundle password, which however the system keeps rejecting. I am 100% sure the password is instead correct. To double check I restarted the mac and checked in the keychain, and the password is in fact correct. Also I could restore specific files from time machine without any problem. But when I try the system restore the way I just described, the system does not recognise that password as the correct one.
    Can anybody suggest a solution? thanks
    john

    I think you will have to ring apple support and see if they can help you.. there is no easy way around this .. TM is simply buggy in Yosemite.. although encrypted TM bugs are not new. I think the same thing happens on earlier ones..
    Re: Clean Install Problems With Encrypted Time Machine
    The fix might be fairly long.. use setup assistant and use a different target drive eg USB and do a full install of the entire backup there. And then pick and choose the files..
    For now I would avoid using encrypted backup.

  • Can't connect my ipod touch to my Wifi.  It does not recognize my password when i try to join my network and I know my password is correct

    I just received an ipod touch 4 generation and very annoyed and have been trying to days to connect it to my wifi at home.  I know my passpord is correct but it does not recognize it and does not let me join my network.
    help.

    Does it say password is incorrect?
    - Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for