I just switch from tape to digital. The video has a little bounce when played on tv. I copyied the DVD to a folder
I just switch from tape to digital. The video has a little bounce when played on tv. I copyied the DVD to a folder, and burned it to a dvd.
I can see in bounce at the bottom of the screen.
David
Premiere Elements 11, 12, or 13 on Windows 7, 8, or 8.1 64 bit....
You could go back to the project and, in the Edit area, scale out the bouncing bottom edge. I am assuming that it will be visible there.
Then do another burn to folder, and then take the saved folder's VIDEO_TS to DVD disc with your 3rd party software, presumed ImgBurn.
If you want to scale width and height together, then leave the check mark next to Constrain Proportions in Applied Effects Tab/Applied Effects Palette/Motion Panel expanded. If you want to scale width and height separately, the remove the check mark next to Constrain Proportions in Motion Panel expanded.
Please let us know the results. We might consider the Crop Effect also. (fx Effects/Transform/Crop with edits of it int Applied Effects Tab/Applied Effects Palette/Crop Panel expanded).
Thank you.
ATR
Similar Messages
-
Is this likely to be a problem with my carrier (AT&T) or with the phone itself?
AT&T. Try disabling 3G - Settings > General > Network > Enable 3G > OFF.
-
i have just switched from a PC and installing my googlemail account onto my Macbook pro. I can successfully see my calendar and contacts but my mail will not connect. i get an error message - can not connect to the server. Any ideas please?
Neil,
I don't use Apple's Mail client (I use MS Outlook) but setting up your Gmail account should be fairly straightforward. Just make certain that you have your settings correct.
For your incoming server, be sure to use the "map.gmail.com" server, using SSL, using port "993" (usually the default).
For your outgoing server, be sure to use the "smtp.gmail.com" server, override the default port and use port "465" and use SSL to connect and make sure that you enter your email address and password to access the SMTP server.
If you've already set up your account with these settings, you may need to Google "gmail setup apple mail" and find the Google document relating to same.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim -
I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.
Back up all data. Rebuild the mailbox.
-
Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window. Can't make it fill the screen. Just switched from windows. Thank you.
Check to see if the resolution has been changed in System Preferences.
Allan -
Just switched from safari on my imac. When using search menu in safari I had the option to "find on this page," which was an incredible help while doing research and looking for specific phrases/words. Is there any way to have this feature using firefox?
I think Safari has the same keyboard shortcut as Firefox "command+F" on a Mac or "Ctrl+F" on Windows.
Look in the lower left corner for the Find. There are more likely to be differences in Find Next and Find Previous in the keyboard shortcuts, but continuing at the Find bar at the bottom doesn't matter what browser you use. There is an "X" there to dismiss the Find bar. In Windows the "Esc" key will dismiss the bar if you are within the find text entry area.
Keyboard shortcuts:
* [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts?s=keyboard&r=0&as=s Keyboard shortcuts | How to | Firefox Help], from Mozilla very limited number of shortcuts but will show correctly for your system
* [http://dmcritchie.mvps.org/firefox/keyboard.htm Firefox and other Browser Keyboard Shortcuts (Comparison Table)], more comprehensive but is oriented to Windows users with some guidelines for Mac and Linux users.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
I can't see the Audio Waveforms in the timeline. No triangle button to click. Just switched from FCP. Help!
When I click on the wrench or right click to customize the box, these are the options I'm given. I don't see waveform. I've edited in Adobe Audition for years, and see the waveform panels in all the Premiere Pro tutorials, am I missing something? (besides a brain?)
-
Just switched from Samsung Epic to iPhone 4s. Contacts were filed by first name, which I prefer. But on the iPhone it's by last name. Is there a way to change that?
What I found: Go into SETTINGS - Click onto "MAIL,CONTACTS, CALENDARS" then scroll down to CONTACTS and you will see SORT ORDER and DISPLAY ORDER you can change it to first, last or last, first..
Hope that helps. -
I just switched from a blackberry to a new iPhone 5 S - I would love to be able to add my address book to the new iPhone. How do I do this easily without having to manually add each no.
Unless your carrier doesn't have the required SIM card size, you can get a new SIM card from your carrier. There is usually no charge for this.
If you don't have an Apple iCloud account or if you do being accessed on the iPhone with contacts turned off for over the air syncing, you should be able to transfer contacts from the Address Book app on your Mac via the iTunes sync process. This is selected under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
If you have an iCloud account, you can sync contacts over the air with the Address Book on your Mac. After confirming your contacts are available with your iCloud online address book - checked by logging in with your iCloud account using a browser on your Mac, you can then turn Contacts on for over the air syncing with your iCloud account settings on your iPhone and your contacts will then be available there and kept synced automatically over the air between your iPhone address book, your iCloud online address book, and the Address Book on your Mac without having to sync with iTunes for this. -
I just switch from a Windows 8 machine to a MacPro and when I try and sync my iPhone 5s for the first time it says that sync will erase everything on my phone because it is still synced to my old computer. Any suggestions?
The Apple store wil do this for you.
You can call Apple support and they will help you
You can google it -
Hi. Just switched from PC to MAC (lion 6.7) and I am trying to import my bookmarks but Firefox for MAC will not recognize the Bookmark back up file. How do I move my bookmarks to my MAC from my PC?
Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
You can check that via the right-click context menu of that file and open the Properties.<br />
If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
A JSON backup starts with: <nowiki>{"title":"","id":1,"dateAdded":</nowiki><br />
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki> -
I have just switched from pc to mac. What is the best way to keep Windows, Parallel of Boot camp?
Parallels should be able to handle that without any problems.
There is a version of both of those that will run on the Mac. So you might consider upgrading to that version instead of going with Windows on your Mac.
Allan -
I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?
Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton -
I just switched from pc and want to get my HP all in one printer to work with macbook air. Is it just as simple as downloading drivers from HP?
Turn the printer on and plug the printer into the MBA and your mac should install the printer for you (usually any necessary drivers too). I had a printer I used on a pc and I plugged it into my macs usb port and my mac automatically recognized it and took care of everything for me. If you do this and it wont print, then yes go to the HP website the install latest drivers for 10.7
Also, as a new mac user you should find these articles helpful:
http://www.apple.com/support/switch101/
http://www.apple.com/support/mac101/
http://support.apple.com/kb/HT2477
http://support.apple.com/kb/HT1343
Maybe you are looking for
-
HT5457 how do i download IOS 6 if it isn't on my general settings?
how do i download IOS 6 if it isn't on my general settings?
-
hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but n
-
Labview basic vis for controlling Newport ESP6000 controller and 3 axis stages
I have looked in Ni.com's development zone and cannot find anybody who has created or developed Labview code for controlling a ESP6000 Newport controller. Newport provides the basic level dll for use with Labview. Has anybody developed a good basic L
-
Unable to link shapes to track paths
I had designed a shape then I had established the track (both manually or analizyng the movement) but ...... puttig the track number in the right box to make my shape moving .... the shape stand still !! Where I am wrong ???? Thanks Luca.
-
Is it possible to specify the connection that a certain Aplication module/transaction uses? I need to have a connection open for each user, thats's why i need to tell the application module the connection to use... Please this is very important... Da