I just took my iMac 21.5 inch out of the box and it won't start.

It just beeps in three tone increments. The screen remains dark; I don't see any Apple splash screen or anything. Help!

I FIXED IT!!! I manually reset the ram cards.

Similar Messages

I just took my new MacBook Pro out of the box and the screen will not work. Display is, black no life to the screen at all

So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all

Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down.

Ok i literally just took my ipod 5 out of the box and the home button is not working help me pleasee!

ok i literally just took my ipod 5 out of the box and the home button is not working help me pleasee!

I would go straight back to store, state the problem and ask for a replacement. Good luck.

"Not Enough Storage" just came up. Eveything frozen (Close, Settings in the box), and unable to slide to unlock and slide to power down. Help!!

"Not Enough Storage" just came up. Eveything frozen (Close, Settings in the box), and unable to slide to unlock and slide to power down. Help!!

Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting.
Might unfreeze it however you'll still need to remove some content from your device to free up some space.

My usb ports are not reading anything in plug in. new out of the box iMac

i just took my mac out of the box and the usb ports don't seem to be working. i plugged in a gopro and an external hard drive. neither will show up anywhere.
there is power going to them. what might be wrong?

Worth a shot. Whats the harm.
I'd not recommend it on a brand new Mac. That should be considered DOA. See this caution in this article:
an SMC reset should only be attempted after all other standard troubleshooting has been performed.
http://support.apple.com/kb/ht3964

Well i took my itouch 5g out of the case, and the back scratched how do i get that out, it drives me crazy!!!

well i took my ipod touch5g out of the box, and them back scratched how do i get them out???It drives me crazy!!

You really can't since the back is painted/anodized aluminum

After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But wont work anywhere now

After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

http://pondini.org/TM/FAQ.html

HT201364 I literally just opened my brand new MacBook Pro, and when I attempted to download the OS X Mavericks, a screen popped up and told me I couldn't complete action due to a host of reasons...I just took the **** thing out of the box, what gives?!

I literally just opened my brand new MacBook Pro, and when I attempted to download the OS X Mavericks, a screen popped up and told me I couldn't complete action due to a host of reasons...I just took the **** thing out of the box, what gives?!

Your machine already has Mavericks installed. Why are you trying to download it?

22" iMac desktop OSX 10.6.6 Snow Leopard and it won't boot. I've tried shift start, option command+P+R. It's stuck at the restart, all I see is the spinning wheel below the apple logo.

I have a 22" iMac desktop running OSX 10.6 Snow Leopard and it won't boot. I've tried shift start, option command P R. It's stuck at the restart, all I see is the spinning wheel below the apple logo. And I lost my OSX DVD is there any way to fix this? I just did a software update yesterday and have about 20GB left on my Hard drive. The last thing I did was try to install some plugin's for Pro Tools 8, but it wouldnt let me install so I restarted and now I'm screwed. Please Help!
other specs for my computer: 3.06GHz Intel core 2 duo processor 500 GB Serial ATA hard drive, iSight, magic mouse, wireless mac keyboard
iPod classic 160GB (Late 2009), Mac OS X (10.6.6)

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive. My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive). My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

Buy or borrow an external USB optical drive.
See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W.

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?

Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

Grumpy Gator,
Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
Hope this helps.

Which Linux Distro Works Out of the Box With the iMac late 2009 (11,1)?

Hi. I use all 3 OSes because the other two OSes have tool and games that are not yet in OS X; best of both worlds. Win 8 on Bootcamp is nice for games and utilities but I'm installing Linux too on a separate external drive. I've tried a lot of Linux distros but they all have the bug that prevents ths iMac 4850 mobility GPU to work (you need a second monitor to solve it which I don't have the space for and I only use Linux every so often) but have you tried a Linux distro Live CD/DVD that works flawless on this Mac without editing commands in Linux's GRUB console on Linux bootup?
If there's no distro that works out of the box, what's the closest distro that may only need a few adjustments on its boot menu (GUI preferably not console commands).
But if there's a distro, what's the distro name and exact version (link to download it too if it's alright with you)?
Thank you in advance.
God bless.

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

I just took my iMac 21.5 inch out of the box and it won't start.

Similar Messages

Maybe you are looking for