I just tried to install the latest version and am getting an error message -- error 7 1114. Help!
Really frustrated that I just tried to install the latest iTunes update and it killed my iTunes. I have been at this for a couple of hours trying to fix it--suggestions welcome!
Hi Meskijian,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari
Similar Messages
-
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I downloaded the latest version and I get this error when I open it. Problem signature: Problem Event Name:
InPageError Error Status Code:
c0000185 Faulting Media Type:
00000003 OS Version:
6.1.7601.2.1.0.768.3. Any clue why or how to fix?InPageError
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards? -
I am using Windows 7 and had to deinstall iTunes as it failed on a previous instal. i was told to update my iphone to iOS 6 so that I could get the iOS 6 supporting version of itunes.
I have followed the FAQ to resolve install issues and have no apple software installed on my machine
During install I get a dilog box open, with a retry and cancel buttons with the notice that the iTunes install cannot access the following file:
C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe
In Windows Explorer I can open that directory, but that .exe is not present. iTunes installer thinks its locked
the files present are
Folder - x64
DIFxAPI.dll
DifXInst64
GEARAspi.dll
GEARAspi64.dll
GEARAspiWDM
sECURITY CATALOG - gearaspiwdmx64
Help!this is the latest version of iTunes10.7.0.21 x64. The error I get is
Error writing to file
C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe. Verify that you have access to that directory. Retry or Cancel?
Opening Windows explorer with hidden folders and files showing, I can access this directory. it contains 1 folder
x64. I can paste and delete a file to this directory, which confirms I have access.
Opening the folder x64, the following files are shown:
Folder - x64
DIFxAPI.dll
DifXInst64
GEARAspi.dll
GEARAspi64.dll
GEARAspiWDM
SECURITY CATALOG - gearaspiwdmx64
Opeing the folder x64, the following system file is shown
GEARAspiWDM.sys
I have tried all the steps to completely remove Apple software from my system as set-out in the FAQs.
I cannot delete the Temp directory as there is one file
FXSAPIDebugLogFile
Where I get the file-in-use-error
The action cannot be completed becuse the file is open in Windows Explorer
I have tried the steps advised on Apple support 5 times now but always -
I have been trying to install the new iTunes, and i get an error that a program could not be run.
I have an old version of iTunes and require the new version to connect my IPod. A program can not be run and the installation stops. I have no idea what program or what is required to run it. Please Help.
That would be my first guess. You might be trying to install the 32 bit version of the program.
Update the thread with more info on your apple software etc if its a 64 bit install you're trying to perform. -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
Just tried to install the latest firmware version and the screen has been grey for the last 30 mins
Just tried to install the latest firmware version and the screen has been grey for the last 30 mins, any ideas what to do now?
..Step by Step to fix your Mac
-
I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!
Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.) -
I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
Please help!
Many thanks in advance
Ben Bentley
West Midlands
UK(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator. Help!!
Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having. https://discussions.apple.com/message/17374864#17374864
-
iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.
Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
I keep trying to install the latest version of firefox and it's not working
I'm running firefox 3.something, I think, and I keep trying to install the latest version on my mac. I go through saving it, opening it, dragging the icon to my apps file...and when I drag it to my apps file it takes a few seconds to do *something*, pings at me and then...nothing after that. I try to open it and it tells me I have to close firefox first, so I do (restart even) and when it opens again it still opens the old version.
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Firefox open, but does not go anywhere.
-
--Any way to copy/paste clips from one project to another w/o LOSING TRANSITIONS...??
I have CS5... I'm trying to speed up render/export time. I have multiple edited video's in about 15 different projects. I had a couple video's within one project and rendered the work area - consisting of 4 video's...then exported. It was much faster
-
Component in BOM with Split Valuation
Hi all, Can anyone tell me how to assign component in BOM for which split valuation is activated. Example: Material ABC has two source 1) Domestic and 2) Import Now for production material ABC is used in following ratio: Domestic 10 kg Imported 5 k
-
Error in accounting entries in depot process
Hello all 1. At the time of stock transfer to depots, excise entries are correctly generated and cenvat sales clearing account is getting debited. 2. At the time of billing from depot to the end customer, sales (revenue account) is wrongly credited w
-
Validate or Pre-Flight PDF file
Hi all, I'm a programmer with a company that is printing PDF files using HP Indigo presses, which have Harlequin rips to rasterize the PDF file. We occasionally have a file that fails to get ripped, but the rip doesn't really tell me very much about