I just updated iTunes, but when i synch my iPad I get a rotating ball
This is my situation: I just updated iTunes to the latest 10.5, security update, and safari to prepare updating my system to iOS 5, but when I connect my iPad to my Macbook pro, and launched iTunes, I get a rotating multicolored ball. The application iTunes does not respond, so I have to force quit it. What's wrong? Could someone help me out please?
I had the same problem. After numerous attemps to Restore from Itunes, I decided to use the "Setup as New Ipad" option. It went through a few question on new setups. Afterwards all my apps, data, photo's were still intact. Which shows that the Restore from Itunes worked. There must be a small bug that prevents the Ipad to open after "Restore from Itunes" . Hope it will help you.
Similar Messages
-
Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works
When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
When you installed iTunes did you get any error messages?
Anyway, on the face of it it may be worth trying a separate install of Apple application support.
Uninstall iTunes again. Now open Apple Software update, assuming it is working.
It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
Before going on, can you get to this stage OK?
One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures. -
When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.
You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
tt2 -
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384) -
I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
I just purchased pro, but when registering it I don't get the QuickTime 7 Pro" below the Registration Code. I have no idea how to proceed, but do know that it's not working. What do I do?
davidfromsomerset wrote:
Yes, the Pro options are grayed out, and when I click on them it takes me to a screen, to allow me to make the purchase. But the Quicktime box in the Control Panel has "Pro Player Edition" on the "registration" tab.
Hmmm. I'm more used to dealing with this sort of thing on Vista and 7 systems ... and it can also be a bit easier to implement workarounds on Vista and 7 than it is on XP. But we can try some basic principles troubleshooting if you're game.
If you're game ... first, by way of experiment, let's try a "Run as ..." and see if that gets you the Pro controls.
Quit the Player.
In My Computer open Local Disk C:\ or whichever drive you've got your program files installed on.
Open the "Program files" folder.
Open the "QuickTime" folder.
Right-click on the QuickTimePlayer.exe file and select "Run as"
Select the Administrator account, entering your password if you've got one.
If the Player launches, do you see your Pro controls active now? -
I recently updates itunes and when I try to sync I get an error message
I just updated itunes when I got my 6 plus and now when I try to sync it says "attempting to copy to the disk "Macintosh HD" failed. You do not have enough access priviledges for this operation"
And itunes also won't let me purchase any songs or download things I've already purchased??? Can anyone help?Firefox 3 requires at least OS X 10.5, you can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
My iTunes won't update on my windows Xp computer and it wont recognise my iPad,help?
im not sure what version of itunes is on the computer but i think it will be the newest on the ipad,ive tried updating the computer but it doesnt work. the message says "the registry settings used by the itunes drivers for importing and butning cds are missing. this can happen as a result of installing other cd burning software. please reinstall itunes" but ive tried to re-install and it doesnt work?my ipad is IOS 6.1.3
-
I was updating my daughters ipad last night to the latest operting system, when finished it came up with an error message, her ipad then went blank and came up with the picture to connect to itunes. But when I connect to itunes it comes up with the error message "itunes has detected an ipad in recovery mode. You must restore this ipad before it can be used with itunes" - can someone help with how I can do this
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I am having problems syncing my I-Pad. I downloaded the new version of I-tunes and when trying to sync I am getting a message..."This ipad cannot be used because the required software is not installed. Run the itunes installer to remove i-tunes, then install the 64 bit version of itunes."
Can anyone help me?Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I have successfully downloaded Itunes, however, when I click on the IStore an error message pops up "check network connection and try again". My network connection works perfectly and I have disabled all firewall and security programs. I've tried uninstall and reinstall several times and still get error message. Does anyone know how to get around this? THANKS!
Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime -
After updating itune, I get the above said error messge.
I notice from other postings on the web that I am not alone and that this problem has been around for some time.
My web search found no definitive solution or any official response from Apple.
I will be very grateful for solution to this annoying and persisting error message.
I use both the ipad and iphone.
Thanks in advanceFound the following link that may help:
http://www.justanswer.com/computer/4wpot-error-message-can-t-find-sqlite-prepare -v2.html -
can't remove old version of quicktime system says that cannot access resourse bad path ?
I'd try removing old QuickTime msi files, these are installer files for QT. Located in C:\WINDOWS\Installer
This link may help if you're not sure on how to go about it.
http://www.majorgeeks.com/files/details/windows_installer_cleanup_utility.html -
hi i tried to sync my iphone to my itunes after the update but i dont see my phone on there and the sync thing is grey what do i do if its not showing
Well, you don't say what computer OS you are using, so here are the support documents for both.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
I've just update itunes but I can't get into itunes store anymore
Just as the title,I can't open itunes store,I tried for nearly 2 hours.It just a blank page for itunes store.I don't know the reason.I need someone to help me!Thanks in advance.
It just a blank page for itunes store.
Paucifer,
That has been a common problem lately. Sometimes it is caused by an incompatibility with some other program running on your computer. It can usually be corrected easily by following the steps in here:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
Maybe you are looking for
-
After an Update I-Tunes I received an Information that my Apple-ID is not valid anymore. So i opend a new account filling in the same personal informations but using a different Emailadress (Account - ID) and passwort. Now after several month i recog
-
I'm borrowing a friend's iPod touch until I get another phone and I want to add some apps. I deleted all the apps that weren't needed and then I tried to add some of the apps that I need. I switched the Apple ID account on the iPod and the iCloud acc
-
Stuck on connect to iTunes screen
I had my ipod touch connected to iTunes and ran an update. Next thing I knew my ipod had frozen up and was no longer recognized in my itunes folder as connected, nor in my computer. Now my ipod, when I push the power button, "iTunes" round music sy
-
How do i active apple mobile device
how do i active apple mobile device
-
How to update safari browser after installing snow leopard
Hi, I had been having trouble for a week and couldnt get online at all. Then I updated to snow leopard just before and I can get online with firefox. My safari web browser still isnt working. Each download I use to update states it is too old for s