I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them.
I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them? Help!
having the same problem, my wifes is just fin and mine is invisible
Similar Messages
-
i updated my ipod and restoreed it twice and it is still not working it doesneconive my ipod and the only thing on my ipod screen is the freacking USB for the cord and a arrow pionting to a round itunes simble. i need my ipod i use it to txt and work and everything else i cant have it crash now.
ps thank you for listening:)Is this your problem?
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?
It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.
-
i've just updated my itunes to 11.0, but now it won't recognize my iPhone!!!
please helpA search of google would have answered the question in less time than it took to register here and post.
-
My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4
iPhone 4, same thing. It gets stuck at Step 1: backing up
-
I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks
Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear. -
My itunes is updated i believe since i check for downloads and there wasn't any. Now whenever i plug in my ipod touch a error pops up telling my to go to itunes.com and update to 10.6.3 or later. i even tried to download it from itunes then it said i needed 64 bit windows but i already do. help? iOS 6
When i tried the iTunes64Setup.exe. the file is not vaild with 32winapplication
many thanks. That one suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I recently updated my softward on my computer. Now when I plug my devices into my computer on iTunes, they are not recognized and I cannot sync them.
Had the same problem. I initially reinstalled iTunes without removing the older files. Finally, I removed itunes, apple application support, apple mobile device support and apple software update. Downloaded a fresh iTunes instal file from the iTunes site. Everything is fine now.
-
I download songs from my dropbox to my macbook pro and then upload them to my updated iTunes. iTunes plays them in entirety, but when i update my iTunes match, my iPhone and iPad skip many of the songs and albums. Why? I have tried everything.
If you have manually manage set, you do not sync.
If you want to sync, select the content desired to sync and sync.
This is all covered in the User's Guide. -
When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates -
I had to change computers. Now when I plug in my iPod I get the message. My iPod is synched with another itunes library. How do I find and synch with my original.
You need to Copy the iTunes from the Other computer or its Backup, to your New computer.
Also, See here for...
Download Past Purchases
http://support.apple.com/kb/HT2519 -
when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store. What do I do now?
Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!
-
ITunes locks when I plug in my iPod Touch
I recently transferred my iTunes library and devices from my old notebook to my new PC. It worked fine. About 3 weeks later, I found that when I plug in my iPod Touch 3rd gen that iTunes would hang up if it was open. If I don't open iTunes, I can plug in the Touch and then start iTunes and it doesn't lock up and I can sync. The same seems to happen with my iPad.
I'm at a loss as to how to go about fixing this, or even how to debug it. I'm running iTunes 10.2.1.1 and both devices have IOS 4.2.1. It might have started happening after I upgraded to 10.2.1.1. I'm running Windows 7 64-bit on a quad-core machine with 8Gb of RAM.
Any suggestions? Should I start by uninstalling iTunes and re-installing?
Thanks, Gary BergThat had a link, a couple times removed, to how to reinstall iTunes. I followed that, and it is better, but not perfect. It appears to be linked to whether or not I've checked for new podcasts since I started iTunes.
So it's not a complete fix, but helped. Frankly, I wonder if it's a bug in this version of iTunes. -
Just updated to iTunes 10.2.1 and now can't add any new songs.
My MACbook is running 10.5.8 and just last week I updated to iTunes 10.2.1 but now I can't add any new songs at all. I go through the motions but when I check the "recently added" checklist, it's blank. The song is never added to my iTunes library. Is there a fix for this?
RESOLVED.
I tried updating iTunes to 10.2.2 thinking this might somehow help me but same situation. Upon further investigation, the set of MP3s I was trying to add didn't have the typical MP3 logo on them. When I tried to delete them from my system, it said "in use by application". I forced a delete. I copied the MP3s again to my MACbook and this time was successful in adding them. Looks like it was a bad set of MP3s and not iTunes.
Maybe you are looking for
-
Text Var not working correctly in workbook
Hello all, I have created a text var which is working on replacement path on 0calday. i have added this text var in a query and ran through query designer ( execute through web ) it is showing correct results. i have created a workbook whereas i have
-
Change y-axis BACK to auto/ auto for max min
I have a bar chart and the settings for my y-axis are 250/auto. I need it to revert back to auto/auto for max/min b/c one of my numbers is large and is shooting off the graph.
-
How to authenticate a Servlet-- HELP!!!!!!!!
I have a Java client that try to contact with a servlet using a user and a password. I know that the authentication is correct, because the message "User OK" (showed below) appear, but I don't know what to do now to obtain an UrlConnection with the s
-
Hi friends I've downloaded few games with with following file formats on my N70: JAR, RAR and JAD. When i try to open or install them I get an error message "Unknown File Format". What can do to resolve this or is there a software that i must install
-
Does Export Version reduces image quality?
Hi, I got smaller file size when I "export version" at "original size". My master was jpeg of 5.1MB and I exported in jpeg format, I got 3.6MB. If I "export master", I do get 5.1MB. What does Aperture do to the jpeg image that reduces the file size?