I just updated my software for imac air then it crashed. now it only lets me use it as a guest
i just updated my software for imac air then it crashed. now it only lets me use it as a guest
everytime i log in as myself, it would not start, i did a soft reboot and it only lets me use it as a guest
Similar Messages
-
i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?
This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.
-
i tried to update my software for apple tv and it will not restart after update. flashing lights
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Hi! I'm Ralph.. Just updated my iphone 4s from 6.1.2- 6.1.3. ... Now the photo application won't open... Please help me what to do
Why would this be covered under warranty? There is nothing wrong with the device, it simply needs to be restored.
As already stated twice in this thread, disable ALL security software on the computer and restore the device. -
update 7.0.4 email problems.
That indicates yourphone was hacked to unlock it before you upgraded. It has either now (best case) re-locked to the carrier it was originally locked to, or (worst case) become a brick.
-
HT4623 have just updated the fix for ios6.1.1 i phone now phone crashed will not restore help
I am very very upset tried to install ios 6.1.1 fix and phone now crashed will not restore have followed all solutions by apple now have a very expensive paper weight help
Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.
-
I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!
diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs. -
trying to update the software for my iphone and it keeps saying download has been corrupted. an same for imac update. help?
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
I just updated my software, but seems my macbook got an error of unable to find driver for this platform..
Did you try more than once? If so:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now. I know this is not normal. What can I do? It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
She has had it for about 6 months and this is the first time we have plugged it into the computer since then. I can not exit out of itunes either.If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty
-
I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?
I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new. -
I just updated my software, and now my apps won't work. They just open the close quickly....I've done a force quit, but it stills doesn't work! What can I do?
Have you tried a reset?
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
Don't know where to get help. I just updated the software and I am having issues with not being able to update Aps or install new ones. The circles just spin and Aps just say "waiting." I tried running a diagnostic with the apple store and it came back with "power issues" (?) as a result. It wouldn't let me select an option to see what steps I could take to fix it, it just backed out of the page. I just don't know what to do.....
Hi,
Thank you for your reply, I did go to my general settings, but for some odd reason I don't have a restrictions setting, or a reset setting. I thought I could reset all the setting to see if it could be that, but as I said there aren't any.
My husband also has the iPad 2, and also did the software update and hasn't had any problems at all. I took both iPad's and compared the settings thinking maybe there could be a setting that could have been changed when the update was done. -
i just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod. The tracks stay gray with a stagnant circle beside them in the left column. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Hi Experts I havereceived service quantity 1for $1000. Invoice done for quantity 1 for $950. How clear GR/IR balance $50? thanks and regards ramSiva
-
External hard drive is no longer connecting after Mavericks
Hi! I have been using an eternal hardrive to back up with Time Machine with no problem until I upgraded to Mavericks....then everything went downhill. Now when I plug in my external hard drive it does not register or show at all. What is going on???
-
Does anyone know a fix for being unable to 'place' in Illustrator cs5?
I have been using CS5 Illustrator for over a year now and have had no problems until yesterday when I opened illustrator and was unable to place any images. I can click on 'place' and go find the file, it appears to go through the right process then
-
Purchase Order with Sales Order Reference
Hi Gurus, I have created a Purchase Order with reference to Sales Order.Now when I post Goods Receipt Mvt 101 system throws a message Update Control of Movement Type is incorrect. I have checked in customizing Transaction (OMJJ) cannot find settings
-
How can I locate my stolen iPhone?
I had not installed any tracking software on my phone, I dont know how to track it, Police complaint is useless. Is there any way I can track its GPS location