I just updated the OS on my iPad. Turned it off and now it won't turn on. Anyone else having this problem?
I just updated the OS on my IPad. I turned it off and now have retured to it and it won't turn on. Anyone else having this problem?
Lc137-
Try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes solves mysterious problems.
If that does not help, see if this article does: <iOS: Unable to Update or Restore>.
Fred
Similar Messages
-
problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.
The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards. -
I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?
A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
While downloading iOS6 my phone stopped mid stream now its stuck on the apple logo and wont turn off or on or do anything. Is anyone else having this problem
If your iPhone is listed in iTunes, click Restore on the Overview page and follow the instructions on screen.
Should iTunes not detect your iPhone, try the following:
Turn the device completely off and remove the USB cable from your iPhone while keeping the other end of the cable plugged into your computer.
Now take your phone and press the home button.
While you keep the Home button pressed, reconnect the USB cable to your iPhone
Continue pressing the home button until the "Connect to iTunes" logo appears on your iPhone
Now follow the instructions on your screen to restore your iPhone
For more details check out http://support.apple.com/kb/HT1414
Hope this helps,
Chris -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
After updating to ios 7.0.4, my ipad air will not allow me to turn on the wifi in the settings, and the bluetooth constantly shows a spinning gear in the settings. I'm currently trying to restore factory settings on the ipad for the second time. Powering off did not help. Anyone else having this problem or know of a solution?
I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup. -
It's version 3.6.12. Anyone else having this problem?
You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
LN -
I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
I've just updated to iOS 7.1.1 on my iPhone5, and now it won't sync (I get error -50) - any ideas?
I've just updated to iOS 7.1.1 on my iPhone5, and now it won't sync (I get error -50) - any ideas?
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
I can't complete the 5.0 update without choosing icloud, anyone else having this problem?
I can't complete the 5.0 update without choosing icloud, anyone else having this problem?
You can't just select "skip"? It's at the bottom and is in smaller print.
-
I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?
Ok ...
Try troubleshooting extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.
I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.
-
Firefox is crashing every time I have my MSN email account up. (Since I use it for business, that's many times per day.) It seems to coincide with hotmail's latest update where the email is checked and downloaded to the inbox automatically. Then when it asks me if I want to send the crash report to Firefox, I select yes and it tells me it had trouble sending the report. Is anyone else having this problem? Is there a setting I can change? I can't seem to keep my email account up for more than 10 minutes.
p.s if you're reading this Microsoft, it's still not bad enough to make me to go back to Internet Explorer!Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
I was playing my iPad 2 I left the room for 5 minutes when I came back it was off and now it won't turn back on
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
Maybe you are looking for
-
Premiere CC freeze on export and sometimes during rendering
I have a small project which has four mpeg2 clips in .mov containers, the Fast Color Corrector, Red Giant Looks and Dynamics effects applied to each clip and some title elements. The sequence in Premiere CC seemed to be working fine until the 2.5 upg
-
How do i get ichat to stop showing up all the time
i am about to freak out. i was on photo booth and i pressed i chat. now it keeps showing up on my screen.how do i get rid of of?
-
Hi, a question on another topic. I'm able to run TCP Monitor on AXIS but I dont know how to configure my web service to use it??!! What do I have to put in my code to use this. On a wider note whats the best way to trouble shoot web services? Cheers.
-
Lens correction profile for Samyang 16mm f2
Is there a lens correction profile (or planned) for Samyang 16mm f2 lens - ideally for Canon 7D - please? I'm trying to avoid having to create a profile from scratch. Thanks
-
Upgrade project lower to higher version
I m working in a company and we are planning to upgrade the hyperion3 to verison 9. Can anyone tell me the best way to do this... and the difficulty will be faced... we planning upgrade hyperion planning, essbase and reporting components.