I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!
I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!
Make sure that Work Offline is unchecked: File > [] Work Offline
Similar Messages
-
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
When I upload my images to the web they are not as vibrant. I am using the Save for the Web feature.
When I upload my images to the wed they are not as vibrant. I am using the Save for the web feature and my sRGB is checked. I dont know what else to do. HELP!
We really need to see what you're seeing.
Can you post links to before and after? -
I just bot an ipad mini as aim a frequent traveller and face follow problems....I open yahoo thru safari ,compose email but don't see an attachment icon to attach docs......it only shows attach photos ,vdos.....I seeker apple online help and they said it is yahoos version prob......pls help
Hello
You would not be able to add attachments from Safari on your iPad. You would need to setup your Yahoo mail in Mail on your iPad and then you can add your Photos and videos within your Photos app.
iOS: Adding an email account
http://support.apple.com/kb/ht4810
Write messages
http://help.apple.com/ipad/7/#/iPad99a3f013
Regards,
-Norm G. -
I have uninstalled and installed iTunes several times since it stopped working about a month ago. I get the following error message when I try and open it...
iTunes not installed correctly. Reinstall iTunes. Error 7 (Windows error 998)
Any suggestions on how to proceed?Hi there. I am getting a similar message today. Here is the message I get; if you could help me that would be great:
the procedure entry point kCMPyteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
I've read other posts talking about QTXX.dll problems but this one seems different. Any suggestions b noir? Thanks! -
i compose email using yahoo thru safari and the attachment icon is not visible
from apple ONLINE HELP they told me yahoo version is different than the ipad version??????????
then today they told me not to go thru safari but use the yahoo email app
tried that as well and still no icon of attachment is seen.
PLS CAN SOMEONE HELP AS TO HOW DOES ONE SEE THE ICON FOR ATTACHMENT....as even the apple store guys are unable to helpIam trying to attach normal files
-
How do I get out of recovery mode, that my ipod touch suddenly went into, after updating last night? It does not recognize my ipod anymore and I don't want to restore it back to factory conditions. I have tons of things on the ipod and don't want to lose them! Is there any other way to get out of this 'recovery mode'??
No. You have to restore. To allow the restore try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Manually placing the iPod in Recovery Mode
- Placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod off, let the battery fully drain. After charging for at least an hour try the above again.
- Try on another computer.
- Make an appointment at the Genius Bar of an Apple store. -
original computer is gone and this is my work computer and I cannot use it to update my iphone what can I do and not lose everything thanks
Disabled
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
As the title says, this is a brand new iPod touch bought from a store, I plugged it in a commenced the "setting up" process through iTunes on may iMac. It got to the stage where it said allow this computer to access the device (or something along those lines), i clicked yes, and then a message came up "to allow access, please respond on your iPod touch. however the ipod screen is black, and pressing the buttons doesn't work. How can i fix this? or do I need to return it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to view an SD version of an iTunes movie on my MacBook Pro and it repeatedly freezes 9 minutes into movie. Using iTunes 10. Any suggestions to correct this problem?
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
I just bought a nano and am trying to sync to itune on my mac. It tells me I need the latest version of itune. When I try to download this it tells me I need a new OS. I have updated both and my nano still will not sync. Any suggestions?
Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.
Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?
You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers. -
Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.
Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8 -
How do I keep my email password from remaining in Preferences? I want to enter it every time I get my mail. I upgraded to OS M Lion but it won't let me delete it from preferences (the password from Account Info). Once you enter the password, it keeps it permanently. i do not want that. It's worked prior to using M. Lion. Any suggestions? Also, The other pressing issue i have is, I DO NOT want ANY mail showing in my inboxes when Mail starts UNTIL i enter that password for each account. Instead of creating different user accounts for the MacBook, it's just easier this way. Or is it? If this is a permanent thing, then I may switch back to Lion. I guess I shoud've waited until the kinks were out before installing (**** Mac-head!)
Thank you all kindly for any suggestions & your time
Regards,
JCI DO NOT want ANY mail showing in my inboxes when Mail starts UNTIL i enter that password for each account.
That is simply not possible with Mail, and never has been. Anyone who uses your account can see all messages stored in Mail. The only true solution is to not let other people use your account. Let other people use the guest account, or if you share the machine with someone else, set up a separate user account for that person. This will also solve the problem of remembering the password. It will become a non-issue for Mail to remember your password if nobody else has access to your account.
Maybe you are looking for
-
HT1688 Sending emails!! Why can't I?????
Hello, My name is Tish61. I have an iphone 4s. I cannot send email from my phone but I am able to receive them but not reply to them. Can someone help. Thank you so much.
-
Sap version what is the difference between 4.7ee and 6.0
Hi Gures Now I am working in 4.7ee version but next month onwards in my company they r going to use 6.0 so I want to what is the canges with 4.7 to 6.0? as well can u give details about new g/l concept?
-
Everytime my 30g gets close to being full..it says i need to restore..
i have to set my ipod on manual because i dont have enough room on my computer for all of my music..so i have to put the music on my ipod and delete them from the computer. well. everytime my 30 gig is almost full (1gig of freespace or less)it eventu
-
Problem in Adding matrix data to database
Hello experts, I've designed a matrix using UIAPI code.But, neither I can select a row of matrix nor I can add value to row. But, I can bind each column to field of table and can view the data in matrix from the table. Plz help me to add data of
-
Smartform Table; Internal table to work area
Hi, I have created smartform with one table,in that internal table values are not moving into workarea,can anyone solve my issue.