I just updated to ios 6.1 and now my cellular data is not working

UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
Cheers

Similar Messages

Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

Settings > General > Reset > Reset Network Settings

I just updated to the new software and now my app Store is not working It is just a white blank page

I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.

My Iphone 5 updated to IOS 6.2 and now my contact names do not show on incomming calls or text messages. All i can see is the number of the person calling. how can i fix this?? please help

I updated my iphone software to IOS 6.2 yesterday and im not sure if it is a coincidence but now, my contact names do not show on incomming calls or messages. Also they do not show on past calls or recent history.
All my contacts in my phonebook still exist and are correct, the problem only occurs when receiving calls or messages. please help i need this fixing
Regards,
Frosty

Try to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded!

Just updated to the latest Firefox and now my MSN email will not function. I can see the titles as normal but cannot open individual emails

Just updated Firefox. Now I cannot open msn emails. Email titles appear as normal but will not open.

Hello ebarrow
If there is an issue with update or permissions the better, quickest and safest way is to download and install firefox:
1. Download with your safari a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''''Trash''''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I just updated to IOS 8.2 and now I can't connect to any WIFI network at home or elsewhere. I get a message that says "can't scan for WIFI" and it just keeps searching. How do I fix this?

Can someone tell me how to fix this problem before I use up all my data?

If you can't connect to home wi fi, or any wi fi, go into the RESET area of your SETTINGS and choose RESET NETWORK CONNECTIONS. Turn the phone off and back on and you should be okay. It may take more than one try. Good luck.

I just update my iOS to lion. and now my itunes don't work. this is the mistake it shows

Process:         iTunes [1622]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.6 (10.6)
Build Info:      iTunes-10604001~1
Code Type:       X86-64 (Native)
Parent Process: launchd [128]
Date/Time:       2012-03-19 20:06:52.132 -0500
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report:          23678 sec
Crashes Since Last Report:           33
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      17697DEB-A56C-46F5-9CA0-6114637DC9E2
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x10627b000 -        0x10741afe7 com.apple.iTunes (10.6 - 10.6) <A7AC514C-E3C4-B6E4-522A-D3FE410790C6> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff65e7b000 -     0x7fff65eb01ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500,11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 3
eny ideas???

De nada amigo.
Thank You for extending the courtesy of awarding points to comments that are helpful or provide answers in the Apple Support Communities, as this is not mandatory, but it is much appreciated!

Just upgraded to 10.8.2 and now RUSE via Steam does not work

Now that I have upgraded to 10.8.2, the video game RUSE (opened via Steam) crashes (everytime, always). It ran fine from 10.6.8. Any plans to fix this problem? Ubisoft blames Apple on their support sites....
Put another way, did I just pay money and spend all day upgrading my system only to lose accessibility to a bunch of programs?

Mt. Lion will not run any PPC or 32 bit applications. If you RUSE fits into one of those categories, you might consider a partition or external HDD with Snow Leopard OS on it so that you can play your game.
Ciao.

I just upgraded my eMac to Leopard and now my Mail application will not work.

It will start to load, but I never get a mail window and it won't accept a new account and will not "Quit" unless I "Force Quit" it.

It may be helpful to also ask in the Leopard "Mail and Address Book" sub-forum here:
Mail and Address book (22,773)

TS4510 I just updated to IOS 6.1 and the Do Not Disturb stays on all the time, now what? It had been fixed a while ago.

Mid January, I noticed my Do NOt Disturb was working again, turning off during the day. Now, I just updated to IOS 6.1 and it's on all the time, is this going to get fixed?
thanks, Susan

Have you deleted the account and re-added it?

HT4623 I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

it sounds like you were using iCloud. Go under Settings > iCloud and make sure the switch for Notes is ON (green side showing). If it's already on, turn it off, wait 30 seconds, then turn it back on. Your notes should sync up.

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

I did an update to iOS 4.2 and now several of my applications won't open. My iBook shelf is empty and won't open. I click on it and it just flashes and closes. What is the problem?

I did an update to iOS 4.2 and now several of my apps won't work. Help!

The very first thing you should try is a simple reset. Hold down on the sleep button and the home button at the same time for about 10 seconds until the Apple logo appears on the screen, let go of the buttons and let the iPad restart.
If you haven't restarted your iPad in a while this can really help.
If this doesn't help, then you can try removing the problem apps and reinstalling them.
Retired Engineer makes a good point. It would be a good idea to update your software.

I just updated to 10.9.2 and now my monitor cannot rotate

I just updated to 10.9.2 and now my palette monitor has:
1) Lost the ability to rotate
2) Forgotten my background image
3) Changed resolution
It is a LG Flatron E2351.
I have found others having similar problems and one person has solved it using 'sudo' commands in the command window (something I'm not up to doing) and that scares me a bit... especially since the problem seems to recur after a second reboot.
This is a MASSIVE oversight by Apple and i'm quite upset that they would not allow 3RD party monitors or displays!
I use mine (as mentioned) as a palette for video and graphics purposes... and because I cannot fit 2x landscape monitors.
This needs to be ammended ASAP by Apple. I expect public outcry... I'm hopeful for it... Just like the removal of "mail merge" from Numbers... I'm starting to scratch my head at Apples [P.J.] decisions "post Jobs".

My colleagues and I have a similar type issue after upgrading from 10.9.1 to 10.9.2.
We all use mid-2011 Macbook Pro's and also use a sapphiretech Vid-2x displayport to dual DVI adapter. This adapter essentially bonds two additional external displays into one large monitor. i.e. two 24-inch displays now become "one" supporting 3840x1080 resolution. The only caveat to using this adapter is that both monitors need to be of the same model. There are no drivers needed to use this hardware adapter.
We don't have displayports per se, rather we use the thunderbolt port. The Vid-2x adapters have worked fine for us from 10.7 - 10.9.1.
Since some of us upgraded to 10.9.2 we've all experienced the same issue in that the Mac no longer recognizes the Vid-2x as being capable of the proper 3840x1080 resolution we require. The best we can get is 3200x1200. Another interesting note is that there are at least three different model pairs of monitors being used by us (Samsung, Asus, Dell).

My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?

My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
== This happened ==
Every time Firefox opened
== Today ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Read this somewhere else: Can't find it again so can't reference - apols.
fixed by entering
about:config into the nav bar
toggle dom.storage.enabled to 'true'
worked for me - but don't know what it does or why :)

I just updated to ios 6.1 and now my cellular data is not working

Similar Messages

Maybe you are looking for