I just updated to IOS 8.2 and it won't recognize my thumb print and I forgot my passcode. What do I do?

Great, I knew I shouldn't have updated right away. Now post update my phone is not reading my thumbprint and just wants me to manually enter my passcode, and I don't remember it. What do I do to recover the passcode?

There is no recovery of passcode, you will need to restore your phone as new to remove the passcode.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Similar Messages

  • TS4510 I just updated to IOS 6.1 and the Do Not Disturb stays on all the time, now what? It had been fixed a while ago.

    Mid January, I noticed my Do NOt Disturb was working again, turning off during the day. Now, I just updated to IOS 6.1 and it's on all the time, is this going to get fixed?
    thanks, Susan

    Have you deleted the account and re-added it?

  • HT4623 I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

    I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

    it sounds like you were using iCloud. Go under Settings > iCloud and make sure the switch for Notes is ON (green side showing). If it's already on, turn it off, wait 30 seconds, then turn it back on. Your notes should sync up.

  • I just updated to ios 6.1 and now my cellular data is not working

    I just updated to ios 6.1 and now my cellular data is not working

    UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
    Cheers

  • HT1212 My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

    My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • HT5622 How do I get my iMessage to work? I just updated to iOS 7. Now it won't allow me to iMessage through my phone number

    How do I get my iMessage to work? I just updated to iOS 7. Now it won't allow me to iMessage through my phone number

    Hello, Cubby21. 
    Thank you for using Apple Support Communities.
    Here are the best resources for troubleshooting issues with Message.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Jason H.

  • I just updated to ios 7 but now facebook won't open.   There is a blue dot beside the facebook icon on my phone.  Suggestions?

    I just updated to ios 7 but now facebook won't open on my phone.   There is a blue dot beside the Facebook icon on my phone.  Suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an ipod touch and i forgot the passcode what do i do?

    i have an ipod touch and i forgot the passcode what do i do?

    Connect the iPod to yur computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • Just updated to iOS 8, iMessage and FaceTime not activating?

    I own an iPhone 4s and recently updated my phone to iOS 8. Before, I was able to freely iMessage and FaceTime people without any problems. After updating, I am now not able to activate my iMessage or FaceTime at all. When turning on the iMessage, it always returns to the "Unable to Activate, turn on iMessage to try again." I have tried everything I could find to get this to work yet none of them are specifically for iOS 8 and they are not working. I have even restored my phone, reset the network settings, and many other supposed "solutions" due to my desperation. I just logged out of my Apple ID for iMessage and now it is simply stuck on the "Waiting for Activation" Advice?

    go to settings, general, reset, reset all settings. this causes the phone to reset and finishes installing certain iOS 8 features and should fix any glitches you're having. i have not met someone yet where this did not work.

  • Just updated to ios 7.1 and wanted to go back to ios 7.0.6

    for some reason I didn't like the way ios 7.1 works specially to the battery life BUT when I try to restore am getting 3194 error and when I try the hosts fix am getting 3004.
    please help

    Many people have discovered that doing a reset of all settings will improve the battery use problem. Use the Settings app.
    Settings > General > Reset > Reset all Settings.
    This will not result in data loss but you will have to enter all passwords again.
    The update to iOS 7.1 seems to have turned on some things that the user may have not had on before. Go through your Settings carefully turning off anything that is not needed or wanted. Also check screen brightness as that may be turned up to the max as well.

  • I just updated to iOS 6.1 and my iPad 3 is stuck in recovery mode???

    After receiving the prompt to update my software on my iPad 3 Retina, I plugged the iPad into the charger and began the software update. A few seconds later, everything went black and the plug into iTunes icons appeared. I think this is called the recovery mode screen.
    I tried plugging into iTunes on my iMac, but it wants me to restore the ipad and I will lost all of my apps and content. What the **** is going on here???
    Why cant Apple make a **** software update that JUST WORKS???
    Can anyone please help...

    Its absolutely imperative you make new backups of your data before updating any software for the above reasons, alone.
    You will nomt looseany of your purchased content fomr the itunes/app stores though. You can redownload them directly on the device after restoring: http://support.apple.com/kb/HT2519
    If a recent backup contains the data you want, just restore from said backup.
    Ultimatley, things can go bad, its all human created afterall. Next time, take the time to cover yourself.

  • I have just updated to iOs 5 software and have lost all my contacts! apps etc have restored but no numbers! please help!

    i updated my phone and have lost all my contacts i have restored and all my apps are back but no contacts! help!

    What application were you syncing your contact to before you updated? Check the settings on the info tab and sync them back.
    If you were NOT syncing them to an application (Outlook or Windows Address Book on a PC, Address Book on a Mac), you can try forcing a restore from your backup again. If they don't come back, they are most likely gone.

  • ***! Just updated to IOS 7.03 and iphoto looks like crap!

    When will Apple quit worsening their software with bad updates? Photo in IOS 7 looks imbarassingly ridiculous. Not they've even
    chopped down iphote without asking for permission. Apple's going in a bad, bad direction.

    About all you can do here is send Apple your feedback:
    http://www.apple.com/feedback/

  • I just updated to IOS 8.2 and now I can't connect to any WIFI network at home or elsewhere. I get a message that says "can't scan for WIFI" and it just keeps searching. How do I fix this?

    Can someone tell me how to fix this problem before I use up all my data?

    If you can't connect to home wi fi, or any wi fi, go into the RESET area of your SETTINGS and choose RESET NETWORK CONNECTIONS. Turn the phone off and back on and you should be okay. It may take more than one try. Good luck.

  • I just update my iOS to lion. and now my itunes don't work. this is the mistake it shows

    Process:         iTunes [1622]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.6 (10.6)
    Build Info:      iTunes-10604001~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [128]
    Date/Time:       2012-03-19 20:06:52.132 -0500
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          23678 sec
    Crashes Since Last Report:           33
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      17697DEB-A56C-46F5-9CA0-6114637DC9E2
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x10627b000 -        0x10741afe7  com.apple.iTunes (10.6 - 10.6) <A7AC514C-E3C4-B6E4-522A-D3FE410790C6> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff65e7b000 -     0x7fff65eb01ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500,11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 3
    eny ideas???

    De nada amigo.
    Thank You for extending the courtesy of awarding points to comments that are helpful or provide answers in the Apple Support Communities, as this is not mandatory, but it is much appreciated!

Maybe you are looking for

  • Using Wifi in Japan

    Will my ipt work in japan if wifi is available?

  • Icons in Forms 10g

    Hi all, I'm having problems displaying the gif images in Forms 10g Version 10.1.2.0.2. I did the following: (1) created a myicons.jar file with the command jar -cvf mygifs.jar *.gif (2) copied the created jar file to /$oracleHome/forms/java (3) custo

  • Logic Pro 9.1.8 on ML Crashes after restore to new computer

    Hi I have just upgraded my computer from a Mac OS X 10.6.8 (SL) 2009 Intel Core 2 Duo iMac to a Mac OS X 10.8.2 (ML) 2013 Intel Core i7 iMac, and instead of doing a reinstall of my SW, I restored my previous software and data from the latest Time Mac

  • Aperture... how do I get my new iMac to notify me when my export is complete?

    Hello! I've been an Aperture user for years. I just loaded it onto my new iMac (with Lion) and notice that it no longer notifies me when my exports are finished. The Aperture icon  used to hop up and down along with a button would appear that told me

  • [solved]Cryptdevice not asking for passwd, LVM not accessible

    So,after the latest kernel upgrade, Arch won't boot. What have I done so far; First I ran this commands; cryptsetup luksOpen /dev/sda ar ro modprobe dm-mod vgscan vgchange -ay Then I try to mount them, and chroot into my install. mkdir /mnt/arch moun