I just updated to version 5.0 and my capacity "Other" category is suddenly 11 GB. Why?

My iPhone suddenly jumped from very little "Other" capacity to 11 GB after I updated to version 5.0. Now I am 7 GB over capacity when I previously had plenty of space left. I've been reading complaints on other message boards but none of them offer a solution. Apple needs to address this issue and give me my capacity back!

Who doesn;t offer a solution?  This is not uncommon and the solution is posted regularly. 
This indicates corrupt files.
You need to restore.

Similar Messages

  • Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Hey NJ85,
    Thanks for the question. If you are having issues connecting to the iTunes Store, this article may help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks,
    Matt M.

  • I just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod

    i just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod. The tracks stay gray with a stagnant circle beside them in the left column. Any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user.  Among the surprises:
    - it strips out images from headers and footers without warning
    - it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
    - it strips out alternating left/right margins, without warning.
    There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
    -mail merge
    -meaningful Applescript/Services support
    -non-contiguous text selection
    -ability to set defaul zoom
    -ability to see comments while editing
    -ability to print comments
    -ability to read RTF files
    -ability to drag in hyperlinked ted from a browser
    These about about 90 other features are gone.
    Then there are the bugs.  Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers.  Many reports of the program crashing, courrupting files, etc.
    Fortunately for you, the previous version of Pages is still on your system.  Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!).  Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

  • I have just updated to OS X Maverick and now iPhoto doesn't work it says this version of iPhoto can't be used. What do i need to do to get my photos back?

    I have just updated to OS X Maverick and now my IPHOTO Version 9.2.3 doesnt work. How do i get my photos back?
    Any help much appreciated as i'm not a computer person.

    https://discussions.apple.com/message/25167542#25167542
    Best.

  • I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

    I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

    jedimaster Master wrote:
    how do I do both?
    By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

  • My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?

    My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
    == This happened ==
    Every time Firefox opened
    == Today ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    Read this somewhere else: Can't find it again so can't reference - apols.
    fixed by entering
    about:config into the nav bar
    toggle dom.storage.enabled to 'true'
    worked for me - but don't know what it does or why :)

  • I just updated to 6.0 ios and the passbook does not work.

    I just updated to version ios 6.0 and the passbook app does not work.
    Any ideas, instructions, etc, on how to use this app?
    Please advise.
    Thanks,
    Ed

    To actually use the app you'll need to download passbook compatible apps such as target, fandango, ticket master, American Airlines (not a lot of apps are compatible yet).
    To add tickets to passbook you need to add them through the main app. So if you bought a ticket through ticket master you need to go to the ticket master app, locate the ticket and add to passbook that way.

  • Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    The normal suggestions.
    Close the app,off fully.  Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
    Then reboot the pad and try the spp again.  If same issue, delete the app, then reload it.  ( no charge). You may just have a bad copy.  If continues, write to the developer, they may need to do an update.  I have an older version of the same app and it works fine.
    Since yours is the ad supported version, they are maing real sure you see the ad.  Is it as simple as you need to click thru the ad to get to the game?

  • HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu.   Per Winston's suggestion, I logged out of iTunes and then tried to log back in.  I am getting a message "the server is not responding- please try again later".
    FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
    Sounds like the update has overwhelmed the Apple servers.
    Dave

  • HT4623 I just updated my phone to ios6 and it says update completed, just a few ore steps and im done but wont let me go beyond that page when i press continue it just goes back to the ios6 screen "slide to update"???

    i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....

    If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
    If no luck try to proceed without entering the password. If you can get the iPad functional go into
    Settings > ITunes and App Store and log in there.
    If you can log into to your Apple ID there you will also need to go to
    Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
    Also
    Settings > FaceTime > check or enter the email address you want to be reached by FaceTime.

  • I just updated to 10.9.2 and now my monitor cannot rotate

    I just updated to 10.9.2 and now my palette monitor has:
    1) Lost the ability to rotate
    2) Forgotten my background image
    3) Changed resolution
    It is a LG Flatron E2351.
    I have found others having similar problems and one person has solved it using 'sudo' commands in the command window (something I'm not up to doing) and that scares me a bit... especially since the problem seems to recur after a second reboot.
    This is a MASSIVE oversight by Apple and i'm quite upset that they would not allow 3RD party monitors or displays!
    I use mine (as mentioned) as a palette for video and graphics purposes... and because I cannot fit 2x landscape monitors.
    This needs to be ammended ASAP by Apple. I expect public outcry... I'm hopeful for it... Just like the removal of "mail merge" from Numbers... I'm starting to scratch my head at Apples [P.J.] decisions "post Jobs".

    My colleagues and I have a similar type issue after upgrading from 10.9.1 to 10.9.2.
    We all use mid-2011 Macbook Pro's and also use a sapphiretech Vid-2x displayport to dual DVI adapter.  This adapter essentially bonds two additional external displays into one large monitor.  i.e. two 24-inch displays now become "one" supporting 3840x1080 resolution.  The only caveat to using this adapter is that both monitors need to be of the same model.  There are no drivers needed to use this hardware adapter.
    We don't have displayports per se, rather we use the thunderbolt port.  The Vid-2x adapters have worked fine for us from 10.7 - 10.9.1.
    Since some of us upgraded to 10.9.2 we've all experienced the same issue in that the Mac no longer recognizes the Vid-2x as being capable of the proper 3840x1080 resolution we require.  The best we can get is 3200x1200.  Another interesting note is that there are at least three different model pairs of monitors being used by us (Samsung, Asus, Dell).

  • I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

    I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

    Welcome to the Apple Community.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

  • I have just updated to 7.0.1 and suddenly my search results won't open in a new tab

    I have just updated to 7.0.1 and suddenly my search results won't open in a new tab (let alone a new window - something I much preferred in the past) although this option is checked.
    I even installed Tab Utilities Light Options - all of it's options work, but not for Search Bar.
    When I choose one of the search results and want to view several items on that site (let's say a page with some 50 photo's), there seems to be no longer a way to return to the original search result. I have to start from scratch.
    I hope this can be 'mended' because this is utterly annoying.
    Greetings

    Although 6 other people seem to have encountered this problem, nobody has offered a solution yet. Perhaps the following will put some Firefox gurus on the right trail.
    When I said "my search results", I meant the results obtained with Google (standard when installing Firefox). Now I have tried another search engine (Dogpile) and there The tabs do work. Very strange, isn't it ?

  • Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    I have this issue.  Album artwork was totally fine before.  After this update, it is all messed up and even got messed up when transferred to my iphone.
    iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
    Please fix!

Maybe you are looking for

  • Open link in new window inSafari  5.0.1

    Without doing anything I know of I no longer have "OPEN LINK IN NEW TAB" when I right click over a link. Also when I right click "OPEN LINK IN NEW WINDOW" I get a blank TAB that says "UNTITLED". Thanks for any help

  • Microsoft Office Installation Freezing in OS X Mavericks

    I just upgraded my OS X from Snow Leopard to Mavericks on a 2008 iMac.  As soon as Mavericks was finished upgrading I tried to install Microsoft Office 2011.  It starts installing, but freezes about two minutes left on the install.  After about 12 ho

  • XI3.0 Receiver file adapter write to windows shared drive

    Hi, Our XI server SP09 currently runs on windows 2003 server,  I wish to use the receiver file adapter to create a file on another windows server.  I have created a folder on the other server and set permissions so that anyone can read and write to i

  • Creating thumbnail of a video file

    hi all, i'm thinking about creating a thumbnail for a video file (my format is 3gp) -> i think it's gonna be like the first frame of the video to become an image file how can i do that? any1 pls help... btw, when i record a video in K610i...is it alw

  • Accordion menu rendering in Chrome

    Hi, i have a rendering problem with chrome: www.fluentcommunity.com the main website menu (accordion) renders well in mozilla and explorer, but if you try to open it in chrome since few weeks it does not render properly. Can you please direct me how