I just upgraded Bridge. Now it won't launch.

I just a few minutes ago upgraded Bridge in order to have the latest RAW compatibility.
Now it won't launch.
WHERE do I "check with the developer" to see if Bridge CC works with this version of Mac OS X. I am using a 2007 MacPro, running on OS 10.6.8. Not possible to upgrade to 10.8 or later.
Adobe Bridge CC WAS working earlier today, before the update. How do I go back to the version of Bridge that I was using? Or is there a better solution?
- Jeff

JeffWillard-Bedford wrote:
Adobe Bridge CC WAS working earlier today, before the update. How do I go back to the version of Bridge that I was using? Or is there a better solution?
- Jeff
You can get it by rolling back to a previous Time Machine backup or upgrading to 10.7.
Full story here: Adobe Bridge CC 6.1 not launching on MacOS 10.6.8 (not a supported OS version)
Gene
(If this or any other response answers your question, use the correct button to mark it as answered, or ask follow up questions if it doesn't.)

Similar Messages

I am getting an error that says "failed attempts to get anything from cdr server" on a website. It just started and now it won't launch the information. How do I correct this?

This is occurring on the website Virgin Mobile. I was asked to perform some upgrades on my computer and now I am unable to get the content of my call history to display on a screen within this website. The 2nd window will display quickly and then shrink down before showing the call history content.
The error message then pops up saying "failed two attempts to get anything from cdr server"

Are you using the original gray-faced OS X DVDs that came with the system (if so, what OS X level does it say on the disk) or a retail copy of OS X 10.6 or another gray-faced OS X disk from another system? You can't use a gray-faced OS X disk from, for example, an iMac or MacBook Pro, to install on your MacBook.
Was it originally delivered with an OS X level that is greater than what you're trying to install? You can't install an earlier level than what came with the system.
Did you boot to the DVD, and use Disk Utility to create one disk partition, then reboot and try to install?

HT201263 well i was listening to music on my iphone and then it just stopped and now it won't come back on. i tried resetting it alot and nothing i mean nothing comes on! i tried recharging too and nothing and tried connecting it to itunes and nothing!

well i was listening to music on my iphone and then it just stopped and now it won't come back on. i tried resetting it alot and nothing i mean nothing comes on! i tried recharging too and nothing and tried connecting it to itunes and nothing! Help? what can i do?

http://support.apple.com/kb/TS3281

XI have just replaced my hard drive and uploaded my backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

I have just replaced my hard drive (more memory) and uploaded my Time Machine backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

Well without no information to work with, try reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Just upgraded and now a keyboard is appearing on an app and I don't want it

Just upgraded and now a keyboard is appearing on an app and I don't want it

If the keyboard isn't supposed to show in the app then it's possible that the developers need to make a change for iOS 8.
You could try closing the app via the iPad's taskbar and see if that makes any difference.
If not then you could try deleting the app and redownloading it and see if that fixes it - though if you've made in-app purchases within it you may want to check if they are re-downloadable.

Does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

uninstall.
run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer.
right click the setup file and click "run as administrator".

FC Studio Crossgrade - now app won't launch!

I just got my crossgrade disks yesterday and did the upgarde which took about 6 hours. I launched the app when it was finished, made sure it opened, looked at some old projects, quit, slept the computer all night. Woke up, did some email, shut down, came back 5 hours later and now FC won't launch. DVD SP will launch, Soundtrack Pro will launch but not FC. I'm screwed.
I've done a search, can't find anything on this. I'm going to try and repair permissions and see if that helps.
I used to have issues with it not launching before I did the crossgrade - but I thought was a rosetta issue since I have the same proble with MS Word and excel sometimes - but after a restart, all works fine. I'm running 10.4.8.
Please help!
Denise

OK, I've got it working (knock on wood) and here is what happened in case anyone has this issue and pulls this up on a search:
Did the crossgrade - all apps (motion, DVDSP, Soundtrack, FC, etc)
Did NOT repair permissions
Launched FC immediately after install - launched fine
After about 12 hours of sleep, FC faild to launch. Click icon in dock and arrow below icon comes up for about 1 second and then fades away. No spinning of HD. Attempt to launch from icon in application folder - nothing. Finder remains active, no spinning of HD.
Repaired permissions - no luck.
Reset P-Ram - no luck.
Safe restart - no luck.
Unplugged all connections to computer - safe restart - no luck.
Finally I just popped in the cross grade install disk, unchecked everything except FC and compressor and installed it again.
Repaired permissions
Worked last night
Worked again this morning after a shut-down all night.
I guess I'll abandon the sleep thing as well for this computer. Seems OK to do during the day, but not over night.
Thanks for your help everyone. I hope this can help someone in the future.
Denise

Updated iTunes to 9.2, now application won't launch - Error #13005

Help! I just updated my itunes to 9.2 and now it won't launch. An error window comes up and tells me it's due to an unknown error # 13005? I tried re-installing it to fix it but it still won't. Please help. I'm on the white 13' Macbook, running OS X 10.6.4. I have my itunes library in my external HD. Dying to get this fixed any help would be appreciated.

try these user tips:
try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
and, if you have flip4mac installed
I found that the TSLicense plugin was causing the problem.
From the log:
PlugIn Path: /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense
PlugIn Identifier: net.telestream.license
This pIugin is installed with the Flip4Mac Windows Media Components. I solved the problem by uninstalling the WM Components via the uninstaller at /Applications/Flip4Mac/Flip4Mac WMV Uninstaller.pkg, after which iTunes opens successfully.
JGG

CC Bridge loaded but won't launch

CC Bridge loaded but won't launch.Tried everything sugested still nothing.Any help please.

Hello!
The latest creative cloud application update, 1.4.1.351 fixes a permission problem that causes Bridge to shutdown after startup on OSX 10.9.x
More info in: http://helpx.adobe.com/creative-cloud/release-note/cc-release-notes.ht ml

Out of memory message in Illustrator. Now Illustrator won't launch. Can I reinstall?

I was working on a very detailed illustration in Illustrator and got an out of memory message. I ended up forcing Illustrator to quit. Now Illustrator won't launch. In the Adobe Creative Cloud, can I uninstall Illustrator and reinstall without having to pay extra?

Kathy,
I believe you should reinstall using the full three step way:
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Installation of Comodo Free Firewall Crashed System, Now Firefox Won't Launch

I installed Firefox 4, then my ZoneAlarm Free Firewall and Free AVG 2011 Antivirus were rendered incompatible. As a result, I installed Comodo Firewall --- I did not uninstall Zone Alarm or AVG. Comodo instructed me to restart the laptop in order to finish the successful install. When I restarted the laptop, it crashed. I restarted in Safe Mode and did a system restore ---went back 6 days. Now Firefox won't launch.
What happened and how can I fix it?

Hi thanks for that. I've been through those pages already. I think maybe my lack of knowledge is hindering me somewhat. However the page you linked assumes two things: I can see the processes on Task Manager and I can start up Firefox. The latter is unusual. You see when it suggests changing or creating a profile, I have to use the profile manager which is part of Firefox - which I can't open.
I don't think a previous session is still running because I've restored and installed so many times.
While I appreciate the speedy response, if anyone has any ideas using words, I'd be extremely grateful. :0)

Just upgraded and now phone is DEAD. Won't turn back on even holding down both start and sleep for 15 seconds! Was perfect before...help!

Upgraded my iphone4 2 days ago and now it won't power on at all. It is completly dead. Have tried plugging it in wall and computer. Have tried holding down the power and sleep buttons for 15 seconds... nothing. Please help!

You have done everything correctly so far. Try charging again with the wall charger for at least 30 minutes. Maybe the iPhone will turn on itself. If not then try the Reset again, hold both Home and Power buttons until the iPhone restarts, keep holding for at least 30 seconds if necessary. If still nothing, make appointment with Apple Genius and have them fix or replace your iPhone under Warranty coverage.

Just upgraded to the latest version of iPhoto and now it won't launch without crashing

Just loaded the latest verion of iPhoto and now it will not launch without crashing

Try trash the 3ivx folder from
HD/Library/Application Support
Regards
TD

Yosemite upgrade done now MAIL won't open

Hi All
Running a 2011 macbook pro. Just upgraded to OS X Yosemite. I now have two issues:
1. In iCloud, it will not let me log out of my old account (old email address that i no longer own). It tells me i need to open mail then try again.
2. When i try to open mail it won't open and i get an error message and report that is sent to Apple.
Can anyone help please? Low tech answers if possible
Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Upgraded eMac, now fan won't work

Hello,
I just upgraded my son's eMac - put in 1GB RAM, Pioneer DVD-R drive and 320 GB hard drive.
All the upgrades work just fine (and he is very happy), but now the fan won't work. I've checked and double-checked the connections - there were two connections that I've unplugged and plugged in three times. The fan can spin if I flick it, so it is not impeded in any way.
Any ideas?
eMac Mac OS X (10.4.9)

Yes, the fan was operating fine because it was so loud you couldn't miss it.
I appreciate Roam's comments, but my electrical engineering background is spotty. I understand that it is either the fan or the connection to the fan, but I have not the tools nor the knowledge to connect a battery to see if the connection is good.
What I can't figure out is what went wrong. There are only two connections coming from the fan unit, and one is actually the power supply that goes to the electrical plug (which is part of the fan unit). That one is obviously working fine because the computer powers up. The other one is this simple looking small snap-in connector that seems like a total no-brainer to attach. It's not something that could even easily get bent or anything.
I'm obviously missing something important, or the fan picked a really weird time to stop working.
For now he's shutting the computer down when it feels hot. I'm sure that's not a good solution.

I just upgraded Bridge. Now it won't launch.

Similar Messages

Maybe you are looking for