I just upgraded my 3gs to OS5 but now my computer cannot coonect via usb. Computer says windows does not rconize it ... any help please
I just upgraded my 3gs to OS5 but now my computer cannot coonect via usb. Computer says windows does not rconize it ... any help please
I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it?
Similar Messages
-
CS6 Just upgraded my mac to Yosemite but now can't import graphics from photoshop to illustrator. Does anyone have a solution?
My advice to you is, if you can, drop back to Mavericks. You will have better luck since CS4 is not supported (nor are CS5 or CS5.5) on Yosemite. The other alternative is to uninstall the entire suite, run the cleaner tool and reinstall completely from the original discs or a new download. Be prepared for other fun stuff as well.
-
I have compiled my movie and I downloaded it into iphoto and then transfered it to imovie. The problem is that the movie plays fine, but will not highlight on the
You may be attempting to Share (export) the movie from the Event Library. You need to create a Project, drag clips (or segments of clips) from the Event to the Project, then use the Share menu to export the Project. Movie clips can't be exported directly from the Event. Clips you add to a Project reference (point to) the clips in the associated Event (or Events).
For more information, see the following iMovie Help topics:
Start a new video project -
http://help.apple.com/imovie/#mov3a61ee67
Add video to a project -
http://help.apple.com/imovie/#mov3a62377a
The Help topics are also accessible from within iMovie. Click on the iMovie menu item "Help>iMovie Help".
John -
Just upgraded my 3GS to OS5 - AoK But spelling assistant is now MALE!
How can I return to the lady's voice for spelling suggestions? - should be possible?
Thanks.Just to close out ... the 'supervisor' was clueless as it turns out. Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong. Did he call back? No ... he just let me go out and find out myself.
So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again! So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
I got the email, saw 'auto-replace'. Got the box on the 28th and immediately turned it around. Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
Yesterday I grab the box from FedEx and go home to check it out. As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
So ...
- it was NOT my home network.
- it WAS a hardware issue with the Mini
- Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
- non-retail customers ARE treated as second-class by support.
This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them. -
Just upgraded iPhone 3GS to IOS5. Now in itunes I can see there's 21GB of Others. I have no idea what is that. I didnt have that before the upgrade. How to get rid of it? It's taken up all the space on the phone.
I posted a fix for this temporary issue earlier but here it is in short:
The memory "hog" that is "others" seems to be the OS as it's installing. It seems to want more than 12GB and you may get stuck at the point where iTunes tries to load everything back on and the iPhone has run out of space. What you need to to is un-check the "sync" box at the apps, music, podcasts and other sections, then click the button to sync iTunes with iPhone. This will result in iTunes deleting all the data it restored, but you'll put it back later. Once you caused the deletion of most of the data, iOS5 will resume installing and then "magically" shrink to less than 1GB. Then you can place check marks back in the boxes and re-sync all your apps and other data. You will have plenty or memory left.
I followed the above procedure and my iPhone works perfectly.
Hope this helps. -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
I was using Numbers '08 and just upgraded to 3.5.2 but now can't open any of my '08 files. Message says save to '09 first to open. Well, I don't have '09 so what do I do?
Or you may obtain iWork '09 DVD package from Amazon online et al. Sold at very low price now. It is really worth it. Don't forget to apply the iWork 9.0.3 updater after intalling it.
iWork 9.3
http://support.apple.com/kb/DL1563
Regards,
H -
My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?
The old Apple ID (presumably your dads) owns those songs and your new Apple ID does not. However, your dad can authorize your iD to use the songs by going to Store > Authorize This Computer from your iTunes menu and entering his Apple ID and password.
-
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want. -
I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?
I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.
-
my itunes has gotten error 7 (windows error 14001) itunes wont even open it just says itunes was not installed correctly. someone help please
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Using SQL Server 2012 SP1
I have a user that is submitting a procedure that uses sp_send_dbmail. I have also noticed that they have the following code in their procedure
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
The user submits the procedure and she gets the email but she also gets the following error message:
Msg 15151, Level 16, State 1, Procedure sysmail_start_sp, Line 8
Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.
Mail (Id: 2402) queued.
(1 row(s) affected)
I have granted execute to sp_send_dbmail and sysmail_start_sp. I have also granted select to service_queues.
Does anyone have any solutions for the above error message?
lcerniThe contents of sysmail_start_sp is this:
CREATE PROCEDURE sysmail_start_sp
AS
SET NOCOUNT ON
DECLARE @rc INT
DECLARE @localmessage nvarchar(255)
ALTER QUEUE ExternalMailQueue WITH STATUS = ON
SELECT @rc = @@ERROR
IF(@rc = 0)
BEGIN
ALTER QUEUE ExternalMailQueue WITH ACTIVATION (STATUS = ON);
SET @localmessage = FORMATMESSAGE(14639, SUSER_SNAME())
exec msdb.dbo.sysmail_logmailevent_sp @event_type=1, @description=@localmessage
END
RETURN @rc
The user get the error, because she does not have any permission on the queue in question. To be able to alter the queue, the following applies according to Books Online:
Permission for altering a queue defaults to the owner of the queue, members of the db_ddladmin or db_owner fixed database roles, and members of the sysadmin fixed server role.
Note that is would be db_ddladmin or db_owner in msdb. Now, supposedly the queue is already active, and in that case I think that it is sufficient that the user has VIEW DEFINITION on the view. This would permit her to see the row in sys.service_queues,
why there would be no need to call sysmail_start_sp.
Altertanively, change the check to:
DECLARE @isenabled bit
SELECT @isenabled = (SELECT is_receive_enabled FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue')
IF @isenabled = 0
EXEC @rc = msdb.dbo.sysmail_start_sp
The idea here is that, if the user has no permission to read the information in the DMV, @isenabled will be NULL, and you just pray and hope that the queue is up and running.
I suspect that the reason this worked for you on SQL 2005 is that on that instance someone at some point in made all the required configurations for it to work, but all that is forgotten now. That happens to me too.
If you really want the user to be able to start the queue, I have some better ideas than adding her to a role, but I skip the details for now.
Erland Sommarskog, SQL Server MVP, [email protected] -
I upgraded iphone 3gs to ios6 but now iphone will not recognize SIM card
Hi,
I upgraded both ipad 2 and iphone 3gs to ios6. I don't see any issue with ipad 2 but now iphone will not recognize SIM card. "Please insert a SIM card" messageYou say "... but now panorama is not working". Panorama never was supposed to work before iOS 6, so you'll be using it for the first time with iOS 6.
The way to enable panorama is to open the camera, click the "options" button at the top center, and select panorama.
Does this work on your iPhone? If not, what symptoms of failure do you experience? -
I have just upgraded my imac to osxyosemite but now cannot upload my photos from camera to iphotos
I HAVE JUST UPGRADED MY IMAC TO YOSEMITE AND CAN NO LONGER UPLOAD PHOTOS FROM MY SONY CAMERA TO IPHOTOS
To do this your device should be firstly connected to computer and iTunes is open. Put your device into dfu mode: 1.turn off your device 2.press and hold power and home button simultaneously for 10 seconds and release power and keep holding home until iTunes says a device in recovery mode. now should be able to restore.
-
I have just tried to update iTunes to the latest software and now I keep getting error messages. I have uninstalled and downloaded the latest version without any success. Any advice please?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?
Maybe you are looking for
-
My younger sister logged onto Facebook, and now I can't get off! Facebook's pages are too wide for Firefox, and usually there's a horizontal scroll bar at the bottom of the screen, along with the vertical one on the right of the screen. The horizonta
-
Drop support only works on the second drop
Hi, I created an ImageComponent that accepts drops and displays images. The problem I'm facing is that the drop is only accepted on the second try. For some reason the getDataFlavors() method on the TransferSupport returns an empty array on the first
-
Java.lang.ClassNotFoundException: javax.swing.JFrame
i have developed a program in java and it is working fine in windows xp, but when i try to execute it in redhat linux, the ff errors are generated: Exception in thread "main" java.lang.InternalError: Unexpected exception while defining class WESMOMP$
-
Schema Diagram error when drop new database objects
Hi All, I am following the document to ad database objects to the Schema Diagram using JDeveloper 11.1.1.4. But when I drag a view to the diagram, it gives me this error. An error was encountered CAR_REFERENCE_CODES_V.CODE Name CODE is already in use
-
How do I fix hte margins in Print Select?
Print selection prints with huge margins; all I get is a tiny column down the middle of the page. I use Mac os 10.7. this does not happen if I print the entire page.