I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it?  It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device."  The music comes out too quiet to the speakers

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it?  It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device."  I dismiss the message, but the remote no longer works with it and the music is too quite to the speakers.  The remote works fine with my Macbook Pro.  I tried a restore on the iPhone and started from scrach, but the same problem exists.
Any help with this?
Thanks,
JT

yep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.

Similar Messages

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • This accessory is not optimized for this iphone you may experience......... this keeps coming up on my phone.I have reset it back to new status and it still pops up help? how do I get rid of that?

    THis accessory is not optimized for this iphone you may experiencenoise caused by cellular interference or experience delay in service.
    THis keeps popping up on my phone.I have reset back to the original state and it is still there? how can I get this message off my phone?
    I have purchased a new one and want to give this phone to my son

    I know this is gonna be a very general tech question but you didnt say in your post.
    Are you still using the device that was giving that warning?

  • My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery."  My question is: how to fix this?

    My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery."  My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

    Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
    Jaded Kane

  • Just started getting intermittent error on my 3G:This accessory is not optimized for iPhone..." but nothing is connected or plugged in to it or anything?

    Was just checking my iPhone and when I pressed the home button to wake it up the message "no sim installed" was on the screen,  obviously it was so I restarted the phone, that cleared it but then I started intermittently getting a popup message "this accessory is not optimized for iPhone...(don't remember the rest), did a hard reset and still happening once in a while, there isn't anything plugged into or connected to my phone at all though, would appreciate any help or advice please

    The most common reason for message "this accessory is not optimized for iPhone" with nothing plugged in, is dust, debris etc. in the iPhone dock port. Clean the dock port with a clean dry toothbrush. If the message returns again, clean the dock port again very carefully using some isopropyll alcohol, especially the pins which are on top of the dock mid rib.

  • How To Fix "This accessory is not optimized for this iPhone" Error?

    How To Fix "This accessory is not optimized for this iPhone” Error?

    Clean the iPhone dock port with a clean dry tooth brush. If the warning occurs again, clean the dock port very carefully and thoroughly with isopropyll alcohol, especially the pins which are on top of the dock mid rib. If still warning, then take iPhone to Apple for Warranty service.

  • How to deleted warning this accessory is not optimized for this iPhone

    How to deleted warning "this accessory is not optimized for this phone"

    You cannot delete it, it is a valid message.
    The issue may be that the dock connector has dust/lint in it or the pins are bent.  Try cleaing the connector with a soft dry brush.
    This assumes that the "accessory" that is generating the message is optimized for iPhone.

  • How can i fix this accessory is not optimized for this iphone you may experience noise caused bycellular interference and a decrease in cellular single strenght error in my new iphone4

    how can i fix this accessory is not optimized for this iphone you may experience noise caused bycellular interference and a decrease in cellular single strenght error in my new iphone4

    Hello abyjohn,
    I would be concerned too if the speaker on my iPhone was not working, and if I was getting a message about the accessory not being optimized.  I found an article with some steps to take when you are experiencing issues like this.
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I keep getting a msg - This accessory is not optimized for this iphone...Dismiss slide makes it go away but comes back. Phone is working ok but pop-up is annoying. Any help out there?

    I keep getting a pop-up. This accessory is not optimized for this iphone.... A dismiss button makes it go away but it keeps coming back periodically.
    Phone works fine. Any help out there?

    Check this article: http://support.apple.com/kb/TS1505
    If you get this message when you are using a "Works with iPhone" accessory, make sure of the following:
    Make sure the packaging for the product says "Works with iPhone" and not "Made for iPod".For more information about iPhone accessories and the difference between "Works with iPhone" and "Made for iPod' accessories click here.
    The iPhone dock connector is free of any debris.
    The "Works with iPhone" accessory's connector is free of debris.
    The iPhone is securely connected to the accessory—that is, it is not sitting crookedly within an iPhone dock and making only partial connection.

  • HELP!! This accessory is not optimized for this iPhone. You may experience noise interference and a decrease in cellular signal strength

    Ive seen loads of people with this issue and no luck.
    Basically as of yesterday, The message
    This accessory is not optimized for this iPhone. You may experience noise interference and a decrease in cellular signal strength" 
    appeared and wont go away. I have nit used my headphones for a month so i cant think of anything that has triggered it.
    Solutions I have tried..
    Making sure my phone isnt on mute.
    Letting the power dye and re charging.
    plugging in head phones etc.
    Still no luck.
    Model is iPhone 3GS 16GB.

    My mum's phone had that message too. I googled it. Sometimes the connection becomes dirty due to dust, dirt, water or a combination of all three. It is recommended to clean out the connection using a clean, dry brush, like a paint brush.
    It worked for her
    I hope that this helps

  • TS2755 this accessory is not optimal for use with this iphone keeps popping up on my phone how do i stop it?

    This accessory is not optimal for use with this iphone keeps popping up on my phone how do i stop it?

    Can be caused by lint, dirt, or foreign material in the dock connector port and it doesn't take much.
    Can also be caused by damage to the pins in the dock connector port including moisture damage.

  • This accessory is not optimized for this iphone - JBL on stage lllp

    iPhone 4
    iOS 7.0.4 (11B554a)
    MC605DN/A
    Hi,
    i've got a problem with the iPhone 4 and the "JBL on stage lllp", the message "This accessory is not optimized for this iphone" appears after connecting it to the docking station. Only the battery is charging. After a reboot with "docked" iPhone it works fine till the next unplug and connect.
    It sounds like a software problem to me.
    Thank you for your help.
    Sascha

    iPhone 4s.
    iOS 6.1.2
    I also have this problem.
    I'm sure I read that the iphone 4s was supported before I bought it??
    My 3GS running 6.1.6 works fine docked into the JBL on stage lllp.
    > After a reboot with "docked" iPhone it works fine till the next unplug and connect.
    I didn't know about this...
    Any one got any ideas or solutions?
    Many thanks.

  • Error message is "this accessory is not optimized for this iphone" how can i delete the accessory? have an iphone3gs

    error message is "this accessory is not optimized for this iphone" how can i delete the accessory whatever it is? the phone does not tell me. Thank you.

    I have same problem which drives me nuts - phone lights up in middle of the night and displays message every hour or so.  Something is obviously not right and it's not dust on the connector.

  • This accessory is not optimized for this iphone message

    "This accessory is not optimized for this iphone - you may experience a decrease in cellular signal strength" keeps popping up on my phone.  I haven't tried to put any accessories on my phone other than the charger that came with it and my ipod cord that I already had.  I have reset the phone with the home and sleep button but this did not help.  The message pops up like every 10 minutes or every time I try to text.  It's getting to be quite annoying....any suggestions?

    Get a new unused tooth brush and clean out the dock connector area at the bottom of the iphone. I have had this haapen before and there is probobly lint causing it. Cleaning it out fixed it for me.

  • I just started receiving this error: "This accesory is not optimized for this I-Phone." What does this mean? I don't have any accessories attached. Should I be concerned?

    A small amount of coffee spilled on my phone this morning.  I dried it immediately, but my phone has started giving me the following error:  "This accessory is not optimized for this I-Phone - You may experience noise caused by celullar interference and a decrease in cellular strength."  Since then I have not been able to manually adjust my ringer volume & I can't use I-Tunes w/o my ear buds. Why is this happening & what can I do to fix this?

    Clean the dock connector with a soft dry brush.

Maybe you are looking for

  • Problem with htmlb:chart after upgrade

    We just upgraded from BW 3.0, WAS 6.20 to BW 3.5, WAS 6.40.   Testing revealed that my htmlb:chart would no longer work.  I just got a white screen whether using Internet Explorer or Netscape.  After much digging, I found that the values for charttyp

  • Accounting doc not generated at the time of billing

    Hi Scenario is that we are going to import some products from thailand for onward local sales. New product is opened with price control v and price determination 2-(transaction based). With this setting, and without running cost estimae, we have comp

  • My screen is not turning when I turn the iPad

    My screen is not turning when I turn the iPad. I need help so if I turn my the screen should turn

  • Required FSMO Roles to Bring up Domain Controller

    I have an unusual situation.  Our network team is moving to a new vendor for our WAN circuits and this change which has left our network split. I have 10 domain controllers which can't talk to the other seven domain controllers. This situation will l

  • Oracle10g DB connections are reset automatically

    Hi All, I am using Oracle 10g thin driver with Oracle 10g R1. I have made a customized db connection pool which I use as required to get a db connection. At times the connections in the conn pool remain idle for more than 1-2 hours. After this time,