I just upgraded to ios7 but why does my keyboard on my ipad mini not work now

Does anyone have an answer for this ?

Is it the built in keyboard or a bluetooth keyboard? If the restet don't work try to reset all settings from settings > general > reset if its the built in keyboard. If bluetooth keyboard, unpair the device from the settings> Bluetooth> and restore the network settings from settings > general > reset and then re-pair the keyboard and iPad.

Similar Messages

  • Why is the Pages app for iPad Mini not working?

    For the last few days I have been having major issues with the word processing application Pages for the iPad. It is taking a very long time to show me my documents, then it takes just as long to open up documents. Then when it finally opens up the document I have selected; the entire functionality is extremely slow and sluggish.
    I turned the iPad on and off several times to see if that would help. I deleted the pages app. I even freed up some extra space on the iPad. None of these things have resolved anything.
    If it is at all relevant I am using the most recent version of Pages (especially since I re-downloaded it). I am also using the latest version of iOS 8 on the iPad. My iPad is synched to iCloud. I have a maximum storage capacity of 20 gb (to which I have only used 675 kb). I am using the first generation iPad Mini (which is the very first iPad mini)
    What could be the problem?
    Should I reset the factory settings of the entire iPad? I'm at a loss of how to resolve this.

    The problem may be due to slow internet access to icloud where the document is being stored and saved.
    Try creating a new document which is not on iCloud to see how the performance is.

  • Why does it appear that mi ipad mini Appleid is now in use and I can not activate iMessage or FaceTime?

    When I try yo activate my Apple id for face time or iMessage I can not do ir. It says that the Apple id is now in use, ADN that its imposible yo validate.

    Is it possible the you are mistakenly trying to create a new account using the existing ID?  That would result in the error you describe. 
    Tell us exacly what you are doing to activate your ID for facetime or iMessage.  What is the process?

  • Why does the screen on my iPad mini jump around?  Apps open and close, I can't get back to the home screen.  Is my mini possessed?

    Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps.  I reboot and still it happens.  Any suggestions?

    If the unit has NEVER been jailbroke, first try a system reset.  It cures many ills and it's quick, easy and harmless...  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Why does the keyboard on my iPad split into two sides

    Why does the keyboard on my iPad split into two sides?

    To elaborate a little more Nick, that is a feature designed to make it easier to type when holding the iPad with both hands.
    If you tap the icon in the lower right of the keyboard, you will see the option to Merge the keyboard back together. If you hold the icon and drag your finger up and down, you will move the keyboard.
    Hope that helps!

  • I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    Hello there, Bromers87.
    It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    and
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why does a movie I bought on iTunes not work without internet?

    Why does a movie I bought on iTunes not work without internet?

    As long as the film has been fully downloaded (or synced from your computer's iTunes) then you should be able to watch it in the iPad's Videos app without needing to be online - is that how you are trying to view it ?

  • I have just upgraded to ios7 but cant seem to close any apps to save battery, on the old system it was just a double click and deleting the icons along the bottom of the screen, how do i do it now?? any help?

    i have just upgraded to ios 7 but cant seem to close any apps to save battery life, on th eold system it was just a double click and  deleting the icons along the bottom of the screen, any ideas how to now?
    Help?

    Close inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe up on the screenshot of the app you want to exit.
    3. The app will fly off the screen

  • My ipad just upgraded to ios7 but now i cant remember my passcode

    my ipad just upgraded to ios 7 but now i cant remember the passcode since i didnt use it before

    Hey freaknik!
    I have an article for you that can help you with that issue:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • So I just upgraded to an iphone 5 from a 4s becaused the screen did not work any longer, however, my 4s still works so I've got everything still but for some reason it will only transfer half my music to itunes so I can't get all my music onto new phone

    Hi there
    So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
    Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
    Can anyone help please?
    Thank you

    Thank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
    All that happens is it just flicks through it all and won't play any of it???
    As in I select the song and it just flicks back one screen (if I am making sense).....
    I am really stuck and cannot work out what's gone wrong that's all.
    Considering a reset of my new iphone and trying again but done that once and it's still the same.

  • Just upgraded my Cannon MP Navigator App for my multi-purpose printer/scanner not working correctlly

    After upgrading to Yosemite MP Navigator App for my Cannon scanner not working properly, Buttons are not active and do not respond .... it works on my laptop with Mavericks ... I will be reverting back to Mavericks .. I use my Scanner a lot . Apple please fix this problem.

    I have the same problem with a Canon MP530 under Yosemite. I'm not sure why Canon can't get their act together to have updated drivers and software. Very aggravating.
    I can confirm that pmt513's workaround works. That's fine for single pages. But what about batch scanning?
    Here's another partial workaround. The main MP Navigator interface still allows you to do the scanning, both single pages and batches. You just can't save, send, or export those scans. But the temporary files are on your disk in TIF format. If you don't mind taking those and converting them to PDF or JPG (which you can do in Preview), then just look in the following folder to the files:
    ~/Library/Caches/Temporaryitems/MP Navigator 2.2/SCN_MFP
    I have put an alias to it on my desktop so that I can easily access the scans. Be sure to copy the TIF files out before you close (and thus clear) the MP Navigator window as that also clears the files from that cache folder.
    I hope this helps some of you.

  • Why does my phone screen flash red an not work??

    why does my phone not work an keep flashing red??

    Is the computer closing down and restarting whilst left unattended ?
    Is the computer running other tasks in the background eg downloading, security upgrades/scans, or disk indexing ?
    Have a look at
    *[[Firefox hangs##w_hang-after-prolonged-use]] - after prolonged use;
    * and note suggestion to use session restore feature to prevent this

  • Why does email address auto-fill in mail not work?

    When composing a new email, if I understand correctly, as you type the name, a suggestion SHOULD pop up with the address of the person.
    This works perfectly in iOS (iPhone/iPad) but does not work on both my MacBook Pros...
    What is the solution?
    I tried deleting all contacts, export to CSV, re-import etc. but to no avail...
    Thanks for your help
    Michael
    Los Angeles

    HI...I have the same question because in uograding from Mountain Lion to Mavericks, I find I can no longer get addresses to "autofill"...guess what , I did exactly what Linc Davis suggested and there is NO autmatically complete address box...which existed before in M. Lion!!  Any other suggestions...I thought these things were ment to UP grade and not complicate life even more?!!!

  • Why does it show my officejet 4622 as not working with an app when it shows it does in the info.help

    My printer is an hp officejet 4622.  I'm sorry to say I need step to step info as I am self taught 70 yr old trying to move forward. Thanks

    Hi vitamary;
    Hope you are doing well welcome to the HP forums
    can you be more specific in what is the problem that you are having, what app is showing that the printer is not working?
    Is your computer running Windows or is a Apple computer,
    letm e know this information and I will do my best to help you.
    Regards;
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Why is the sync option from iMac to iPad mini not working

    I have a IMac and an iPad mini (new)
    I have iPassword on my Mac and have set up the option on both Mac and iPad to sync iPassword between the 2 .
    Part of this set up is setting up 'secret' word and when on the ipad all i have to do is entering the "secret" word which I have down and use the otpion to Sync Now.  in
    I does not work - message I receive is " Sync Problem"  The operation could'nt be completed Connection refused -
    Error domain - NSPOSIXErrorDomain Code +61 - The operation could'nt be completed . Connection refused
    Please advise
    Sue

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Adobe Bridge CC (64 bit) shows in my Start menu but will not open.

    Adobe Bridge CC (64 bit) showed installed on my Start menu and on the apps CC section. I cannot open Bridge from either the Start Menu or the File Menu on CC PS CS6. I'm on Windows 7, 64 Bit. I also can no longer use Print Maintenance functions on my

  • Can't open raw files from Nikon D4s in CS3

    I recently purchased a Nikon D4s & can't open my RAW files in CS3 or Lightroom, do I need a Photoshop upgrade.  I noticed the D4s has an minimum ACR plugin requirement of 8. Thanks Kate

  • Error in JMS receiver channel - XI - Weblogic

    Hi Experts We are also having the situation that we are sending messages from XI to Weblogic server with the help of JMS Adapter. The Queue is available in Weblogic server. Our configuration of JMS receiver Adapter is JNDI Lookup Name of Queue Connec

  • Combo Box - List Value Property

    I have a combo box in a form (Forms 10G) which is populated at runtime using values from a parameter table.But when I generate the form it gives a warning message that the list item property has to be filled . The combo box should display only the va

  • Designer 6i / Erwin / MS Visio

    this is a question for Modeling experts experienced with Erwin, Visio and Oracle's Designer. 1. does Designer provide all the modeling functionality Erwin or Visio provides ? 2. does Designer support UML in its entirety ? 3. is there a comparative st