I just upgraded to LR6 from LR5 and it will not load.

When I start it, the opening screen comes up along with the Library page. The last processed image is there but it's under the LR6 opening image. The small "Loading" dialog box is there, but it's not doing anything. I've rebooted, deleted LR5, rebooted and have let it sit for 15 minutes. I then click on Library and the upper part of the screen goes black and the mouse pointer turns into a circle and just sits. If I click again, the screen becomes a translucent white and that's the end. I get the "Program is not responding" dialog box. I have to close the program. I've done this several times with no change. Any ideas?
David

Well, I tried a couple of suggestions I got from other sites to no avail. Then I deleted LR6 and reloaded it....same result. I guess that means that I will have to contact support via phone. That doesn't make me happy and why? Because they will tell me to do this, that and there fore which should have been written into the software in the first place. I have a "regular" computer; a Win7 64 bit machine on which LR5.7 works just fine.
David

Similar Messages

Just upgraded to OS X Mavericks and mail will not open

Just upgraded to OS X Mavericks and mail will not open

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Just got a new iphone 4s and it will not load yahoo emails. gives message of the connection to the server failed

new iphone 4s will not load yahoo emails, gives message of the connection to the server failed

Perhaps you should use this iPhone email setup assistant to re-enter your Yahoo account settings. If you do that, simply go to Settings > Mail, Contacts, Calendars and delete your current Yahoo account, then use the assistant to re-establish it.
iPhone Email Setup

Just upgraded to 10.6.3 and now will not recognise old library

When I upgraded to 10.6.3, I got a message asking my to create a new Library. OK I thought Apple knows what it is doing. So I created a new Library - itunes1 and now when opening itunes it is itunes1 and empty of all music, podcasts and playlists.
How do I get them back? I am running windows 7

Actually thanks, have sorted it by deleting itunes and repairing, then whe nasked for itunes library not creating a new one - moron, just pointing it at the old one

I just purchased a movie from iTunes and it will not download on either my new macbook and iMac. Keep getting error 8008.

I have been having this problem with other movies for about a week now. I just tried my new macbook pro to see it it would download on it but I received the same error code 8008 (corrupt).
I have about 60 movies I would like to download and back-up but it is happening on all of them.

You probably need to delete your iTunes media downloads folder. From http://support.apple.com/kb/TS3297:
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

I am using i phone 3GS and just upgraded it to ios 6 and it is not reading my sim..please help!!!!

I am using i phone 3GS and just upgraded it to ios 6 and it is not reading my sim..please help!!!!

It's maybe because your iphone was jailbroken or hacked?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version whichi understand is unsafe...what to do?

# Question
I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?

That was probably caused by your Firewall blocking the newly installed version of Firefox.
No known security issues with Firefox 3.6.17, which was just released this past week.

HT4623 I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store and Safari keeps crashing

I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?

Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

PIONEER DVD-RW DVR-105:
Firmware Revision:          A506
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

Try this:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT1338 When I try to start my Garageband 6.05 I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks

When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks

I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it.

I just upgraded to LR6 from LR5 and it will not load.

Similar Messages

Maybe you are looking for