I just upgraded to Maverick but need scanner driver for Epson Workforce WF-3520

Epson says to download it from Apple Store but I cannot find the file to download. Need to get it soon!

http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

Similar Messages

  • I need a driver for Epson Photo Stylus 2200 for OS 10.5.8 PPC

    I need a driver for Epson Photo Stylus 2200 for my  OS 10.5.8 Power PC G5. Does anyone know where to locate one? Epson does not support this version of the Mac. They have  drivers for 10.4 and 10.6, but not for 10.5. Perhaps there is someone has a clue as to where I can find an original driver disk or download  for the my Epson.
    Thanks

    Hmmm, not sure what this Common Updater is, but...
    http://www.epson.com/cgi-bin/Store/support/SupportDownloading.jsp?BV_UseBVCookie =yes&licenseoid=17774&download=https%3a%2f%2fftp.epson.com%2fdrivers%2fepson1428 4.dmg&pn=Stylus+Photo+2200&pc=Epson+Stylus%26%230174%3b+Series&ft=Drivers&return page=%2fsupport%2fsupDetail.jsp&returnparams=%26infoType%3dDownloads%26oid%3d144 02%26platform%3dOSF_M_X5
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14402&infoType=Down loads

  • I have just upgraded from MAVERICKS to YOSEMITE. My ageing EPSON CX3600 will no longer work.  APPLE support gave me advice which did not work. How do I progress short of buying a new printer?

    I have just upgraded from MAVERICKS to YOSEMITE OS 10.10.  I have 4GB of memory.
    Since upgrading my ageing EPSON CX3600 will no longer print.  I get the error message ;COMMUNICATION ERROR.
    Apple support gave me advice which hasn't worked including deleting the printer via system preferences and rhen restoring it after rebooting the system
    Any ideas please.

    Epson Stylus CX3600
    Epson Stylus CX3600 : Drivers & Software
    There is also a driver for it at
    Gutenprint for Mac OS X

  • Cannot install scanner driver for Epson 1650 Perfection

    This isn't making sense to me. I was running Snow Leopard on another drive and was using my Epson Perfection 1650 scanner just fine. I bought a 2TB drive and installed Snow Leopard and am booting from that now and my scanner isn't recognized. If I try to open the Epson Scan utility, it just quits before it fully opens. I downloaded the scanner driver from Epson's website again and when I try to install it, the installer quits before it is fully open.
    I did a Repair Permissions but that didn't help.
    I tried manually copying the Epson Scanner Module folder from my Library on the other drive to the Library on this new drive and that didn't help.
    I found a webpage on Apple's site listing scanners that are compatible with Snow Leopard and mine is listed. It claims most drivers are installed with the system. If so, how come my scanner isn't working now? But it did work in Snow Leopard on my other drive. I can boot from the other drive and use the scanner now, but I want to be able to use it from this drive.

    I have been able to use OmniPage X in Snow Leopard with only one problem. I think it is because I did not try to instal it. It came across with my auto transfer from earlier software/hard drives. It reads documents but does not scan because I haven't transferred over my old twain files. I understand that the OmniPage twain file may not work in Snow Leopard but there is a freeware twain driver which I haven't tried.
    So if you are having problems installing OmniPage on your Intel Mac, try copying over the app, (OS9 style) from an older Mac which has an old OSX system on which OmniPage X successfully installed.
    I use VueScan to scan pages from my scanner, save the multiple pages as a pdf, open OmniPage and get it to import the pdf file. Then I do steps 2, 3 and 4 manually (though you could do all steps automatically). The result is much better and incredibly accurate text - much better than in the olden days when I could scan directly into OmniPage. The only things occasionally misread are numbers, particularly fractions.
    I am scanning two pages at a time and the VueScan OCR, though it otherwise does a quite accurate job, tends to blend the two pages together, so it is not useful for me. It would be far too slow to scan in each page separately.
    It's a shame that Caere sold OmniPage to Scansoft. I remember getting regular messages about improved accuracy upgrades and I'd always buy them. Caere cared. Scansoft does not, even though OmniPage still is the best OCR software for the Mac.
    If Scansoft is not interested in upgrading OmniPage for the Mac, maybe it should stop hogging it and sell it to someone who would be interested in looking after its users.

  • Abobe Elements 12 thinking that my operating system was good.  I just upgraded to Mavericks - but in installing Elements - I learn I need 10.7.0 or higher.  Do I have an option now?

    I purchased Adobe Elements 12 thinking that my operating system was good.  I'm not all that familiar with Apple Operating Systems yet.  A bit confusing with Lion, Mavericks and OS vxx.x.xx - I know I upgratede to Mavericks - but I evidently need 10.7.0 or higher so ... I figured if my OS was up-to-date ... but really, Apple has three different operating systems and software only works with some of it?  I think I'm confused
    Do I have an option now?  The photo editing software seems to work but the Photo Organizing portion doesn't even open. 

    Mavericks = OS 10.9,
    Mountain Lion = OS 10.8,
    Lion = OS 10.7
    So what you have is higher than 10.7.0 and Adobe Elements 12 should be happy.
    If some part of AE 12 is not working, that should be sorted out with Adobe.
    Try this site:   https://helpx.adobe.com/photoshop-elements.html

  • Scanner driver for Epson AL CX16NF

    Hello,
    I have a multi function printer Epson AL CX16NF.
    I found the driver for the printer but not for the fax and scanner options.
    I am using it on my network (wired or wireless).
    It works fine under my windows systems.
    I use Lion 10.7.1.
    Any suggestion?
    Cheers

    I have contacted Epson and for now it's useless as the driver they give me is for Snowleopard
    Now I have done another test.
    Deinstalled all my printers, and reinstalled. but without success.
    By the way, meanwhile I am experimenting another issue, is that I can print only once when I install the driver and then I am not able

  • Need SL Driver for Epson 1000 ICS'.

    I recently got the last PC out of my house, and I am stuck with this epson all in one 1000 ics. I understand that I might not be able to complete capability of the unit, but does anyone know of a generic driver that will allow me to print, and possibly to scan.
    Thanks

    HI,
    Try Google for a GIMP driver for that model number.
    Might be help here also...
    Mac OS X v10.6: Printer and scanner software
    Mac OS X v10.6: Mac 101 - Printing
    Check out "Kappys" post in this thread... http://discussions.apple.com/thread.jspa?threadID=2205605&tstart=0
    Also, run Software Updates from your Apple Menu. Apple may have a driver available.
    Carolyn

  • I just upgraded to Mavericks and can't use my Epson Scanner

    Everytime I try to import with my Epson V600 scanner Photoshop just crashes.   Anyone have this happen and find a solve?

    Thanks for the help, part of it was that I was  using CS3 and that's a big problem with Mavericks.   Instead of spending hours working around it I bit the bullet and signed up for the photoshop cc service.  A bit steep but it's solved several problems.  I do have to say that I really like some of the new features so I'm not as annoyed by Adobe's blackmail as I could be.

  • Hi, I just upgraded to mavericks and need help!

    When I purchaced the mac I was married and my ex set it up using her apple id. I have no idea what her id is. Can anyone help or did I throw away my cpu because I upgraded.

    Purchases and downloads made via the App Store are tied to an Apple ID and you don't have one.
    How did you download Mavericks? Her old ID?
    Then you'll need to revert the machine to its "original" OS (the version it shipped with), Get your own Apple ID and download Mavericks again.

  • I reinstalled Win7 Pro on nc6320 but need a driver for Fingerprint Reader.

    Win7 Pro is now installed on my nc6320 but the Fingerprinter reader software does not work. I have seen similar requests but they do not work for the nc6320.  Thanks.

    Hi:
    Below is the fingerprint driver you need:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Additionally, if you want to use the fingerprint logon feature you need to download and install the Protect Tools security manager
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    If you are missing any other drivers, just use the Vista drivers.
    You card reader won't work unless you install this driver which is not listed on your notebooks support and driver page.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Paul

  • Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

    Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

    Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
    Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
    The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
    Do one of the following:
    USB
    Connect your product to your Mac using a USB cable and make sure the product is turned on.
    Wireless
    Connect your product to your router wirelessly and make sure the product is turned on.
    Note: You'll need to use the product's control panel to establish the connection to your router.
    Ethernet
    Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
    Select the menu on your Mac, then Software Update.
    Do one of the following:
    If you see an update from Epson, select UPDATE to install it.
    Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
    Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
    For more information on scanning in OS X, see our Image Capture FAQ.

  • I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    If your Mac is from the age of Mac OS X 10.8.2:
    How to find your Mac's model and age?
    Contact AppleCare to request the prebundled iPhoto be uploaded to the Mac App Store, or the Mac App Store support.
    This is just a user to user forum.  This link goes direct to the Apple Store support:
    http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling

  • Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

    Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

    Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

  • I want to upgrade to mavericks but my disk needs to be repaired but i have the wrong disk

    i want to upgrade to mavericks but my disk needs to be repaired with a disk. so i did a disk utility verify and it told me i needed to repair it with another disk. 
    but my mac was preinstalled with snowleopard and the disk that came with it is mac 10.5 so when i tried to do a start up with the disk it just freezes the moment i click on the start up disk. (did this by trying holding down option/alt button since holding down the C button just locks my screen to the gray screen)
    and 'repair disk' is greyed out.  and i read somewhere that you can't boot with a disk that is lower than what the mac is.
    what can i do?
    in case anyone asks for my model:
    it is a macbook pro early 2011 model with preinstalled snowleopard

    You need to boot using the 10.6 Snow Leopard DVD that you bought from the Apple Store.
    If your machine had 10.5 when you got it then in order to upgrade to 10.6.8 you must have purchased 10.6. If you've lost that DVD you can buy it again from the Apple Store.

  • Need help: just upgraded to Mavericks, now can't use audio interface.

    I just upgraded to mavericks, and now Itunes and my other programs don't recognize my audio interface.
    It's a MobilePre USB preamp. I tried uninstalling and re-installing the driver without success. Interesting, QuickTime sends audio to the external preamp, the sound is filled with static. I've tried playing with latency, but that doesn't help.
    I can't understand why Quicktime recognizes the external device, but Itunes doesn't. Suggestions are appreciated.
    My machine is 21.5 inch late 2009 model with a 3.06 GHz Intel Core 2 Duo processor and 12 GB of RAM.

    Hope this references the equipment you are using.
    The last update to the drivers is 1.1.3 Nov 2012
    http://avid.force.com/pkb/articles/en_US/download/MobilePre-Drivers?popup=true&N ewLang=en&DocType=1450&q=MobilePre
    If this is correct perhaps an email to Avid could help. I would think that they need to update their drivers to suit Mavericks.
    There is also a link on that page to an article about Pro Tools and state that it is not supported on Mavericks at this time.

Maybe you are looking for