I just upgraded to Yosemite, but now I can't get beyond the login screen on startup without using a usb mouse. After that my blutooth keyboard, magic mouse and trackpad all work okay.

In Yosemite, can't login without usb mouse.

Hello jimpetty,
After reviewing your post, I have located an article that can help with Bluetooth connections. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing.
Bluetooth Quick Assist
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!

Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex

What now? Hard drive replaced 10 days ago but now iMac won't go beyond the grey screen.

Hard drive replaced after inability to get beyond grey, sometimes blue, screen. It's been working fine for the past ten days but now it's stuck at the grey screen. After 3 or 4 minutes, it'll restart itself and the whole cycle begins again. Did a Hardware Test from the disc. First time it appeared to have passed but again not getting beyond the grey screen, did another. This time it froze half way through. Any suggestions? This is an iMac 24", 2009 with large architectural programs installed (Vectorworks).

Not sure what to suggest at this point. I don't think a smc and pram reset will do anything useful for this case but you could give it a try as a desperation move.
If the machine could stay up long enough I would try to make a backup. If not, at least try to copy off that Vectorworks stuff on to a drive. Maybe it will stay up long enough to get just that.
By the way, if you had the AHT boot disk you should also have the installer disk. If you boot from it you could try to run Disk Utility from there to try to repair the boot drive. just in case it's only a problem of a corrupt disk.

I signed up for sync on one computer and got a pairing code on the second computer but now I can't bring up the pairing screen on the first computer. Why not?

I set up sync on the first computer, then got a sync code on the second computer. Now I can't bring up the sync screen on the first computer to sync them together.

Hi shopper104, <br>
# Click the Home button (or type about:home in the location bar) to bring up the default Firefox home page.
# At the bottom of the home page, click the Sync link to open the Sync settings window.
# Then click the Pair a device link and the Firefox Sync Setup window will open.
# Enter the twelve character code generated on your other device and click Next.
# When the code is accepted you will see a Device Connected message and your device will immediately begin syncing. Click Finish to close the setup window.
<br><br>
More information can be found in these articles:
* [[Firefox Sync - Take your bookmarks, tabs and personal information with you]]
* [[How do I set up Firefox Sync?]]
* [[How do I add a device to Firefox Sync?]]
Hope that helped you! Please report back.

Just upgraded to 6.1 now safari kicks me off to the home screen

I just updated to 6.1 two days ago, and today I can't get my email or get on Safari. My emails do continue to get pushed to my phone but when I tap on one to read it, the screen locks up for a second and then kicks me off to my home screen. The same thing goes for Safari, when I go to type in a web address, it locks up for a second and goes back to my home screen. I reset my phone four different times, and then finally reset it to the factory settings, and still it's doing the same thing. Anyone having this same issue?

This has happened to me a couple times with Safari, but not on every web page. I am also having the window randomly scroll back to the top for no reason at all. While reading it will do this, I'll scroll back down and shortly after it will scroll back to the top. Like the other problem it isn't on every web page, but very annoying. I'm wondering if it is a problem reading code on certain pages and if the two are related?
I'm having no problems with Mail (crossing fingers)
Message was edited by: James Hix1
Message was edited by: James Hix1

After updating my Mac mini gets to the login screen, but I can't click on anything. The arrow is there and I can move it around, but doesnt allow me to click on anything

I have a Logitech mouse and keyboard that worked fine before the update. Now I can't get past the login in screen, because I'm unable to click on anything. I have the arrow and it moves around,but won't click on anything

Try using the arrow keys to move around. Press enter to the account you want to go to. I don't know if you can access the password bar after this... it's all I know for now.

I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. Help please. Thanks

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

IMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store

iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.

Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index

Sms . i did upgrade for os6 but now i can not see my messages, its empty

sms . i did upgrade for os6 but now i can not see my messages, its empty

Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

I upgraded to IOS7 and now I can't get past the icloud terms and conditions page. I press agree and the box pops up however I can't click on agree or disagree. Please help

i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup. I click agree and then a small box appears to click agree again and I can't choose agree or disagree. I just need my ipad to work... help

Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this

just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this to you. Just gives me a blank tab and WILL NOT DO ANYTGHING!!!

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I just upgraded to Yosemite, but now I can't get beyond the login screen on startup without using a usb mouse. After that my blutooth keyboard, magic mouse and trackpad all work okay.

Similar Messages

Maybe you are looking for