I just want to mount my external USB drive (connected to AEBS)!!

I'm sure there's a post out there, but I have yet to find it after repeated searches for this topic. I've got to be missing something very very simple. I'll try to be complete on the set-up, please let me know if I've missed any configuration...
MacAlly FW/USB 2.0 enclosure, connected via USB (powered) hub to AEBS. AEBS is running 7.4.1. I can "see" the drive under the "Disks" option in the Airport Utility:
http://images46.fotki.com/v1506/photos/4/48510/325829/disk1-vi.jpg
However, I can't seem to mount/access the disk. (Yes I do have Finder->Prefs->Show Items:Servers checked)
The disk will mount when connected directly to my MBP via FW:
http://images43.fotki.com/v1505/photos/4/48510/325829/DISK4-vi.jpg
I believe I have FileSharing correctly configured (I've since changed from AE pass to disk password):
http://images46.fotki.com/v1506/photos/4/48510/325829/Disk2-vi.jpg
Lastly, my AEBS (named "office") does appear under the SHARED tab, and allows me to connect using my disk password. However, there's nothing there...?
http://images50.fotki.com/v1512/photos/4/48510/325829/disk5-vi.jpg
I must be missing something very easy, feels like I've almost got it! Any help greatly appreciated. Thanks.
Andy

Andy, your post did not indicate how your drive was formatted.
AEBS wants to see a drive format of HFS+. FAT32 should work as well.
Might be something to check if you have not already done so.

Similar Messages

Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack

How to share external USB drive connected to airport time capsule

I have a 4TB Seagate USB Hard Drive connected to my Airport Time Capsule. The Time Capsule connected to a newer iMac running Maverick.
I use the Time Capsule for Time Machines Backups and as a Router, as it was designed for.
I want to use the external Seagate drive to share content with other devices (Mac, IOS, Windows) on my home network
Problem: I cannot figure out how to SHARE the external Seagate drive so that any other devices can see it.
Steps tried: Go to System Preferences, Sharing, and I am unable to add this Seagate drive to list of sharable objects. It is grayed out.

the drive is formatted as AppleShare. Is that a potential problem?
No, that is the correct setting if you want to share out the drive.
Finally, when I run Disk Utility I don't see the Seagate drive (nor the Time Capsule) at all.
Remember that the Time Capsule is a network drive. Any other drive connected to the USB port on the Time Capsule is also a network drive.
Disk Utility cannot be used on a network drive. It only works on a drive that is directly attached to a Mac. If you need to partition the USB drive or something similar, you will need to connect it directly to your Mac for the operation.
Otherwise, everything looks correct in AirPort Utility.

External Hard Drive connected to AEBS does not auto mount

Just upgraded from Tiger 10.4.11 to Leopard 10.5.5. I have a AEBS running 5.3.2 airport utility with a LaCie HD connected to it.
In Tiger, my external hard drive would auto mount onto the desktop every time the computer turned on or woke up from sleeping etc.
In Leopard, my external drive will not auto mount. It does not show up in the sidebar under devices. It does not show up in the disk utility. To access it, I have to go the the finder sidebar, select my AEBS under shared, then select my HD. Also, I did check show connected servers and external disk on the desktop in the finder preferences. Also, not sure if this matters but the icon on my external drive on my desktop is the blue drive with three people holding hands and not the brighter blue one with the wireless signal logo.
In tiger my external HD basically acted like any other folder that was always there and not like a networked drive that I had to go and connect to. I want to go back to that. I heard this has to do with leopord no longer having the airdisk utility??
thanks

Try making an alias of one of the top-level folders in your external (AEBS-connected) drive, drag it to the desktop, and then put it in your Login Items.
--> System Preferences/Accounts/Login Items
You can simply drag the folder alias into the Login Items window.
When you next log in, the folder will be automatically opened. Alas, it doesn't give you instant access to the entire external drive, but you can back out a level to see the entire drive. It isn't quite what you had with Tiger, but perhaps it will suffice.
If you leave the aliased folder on your desktop, you have a skinny approximation to the mounted volume that you had with Tiger.

I want to backup an external hard drive connected with time capsule

What to do? I want a macbook air but realise that the storage is limited. I want to have en external HDD connected through time capsule or similar to access storage "wirelessly". I want everything backed up automatically through time capsule. I understand time capsule does not back up connected external HDDs unfortunately. If it did my problem would be solved. How should I do? Can a two time capsule solution be possible where one is used för storage and the other for time machine also backing up time capsule nr 1?
I do not want to loose all my photos! They won´t fit a macbook air... I have tried "crash plan" wich is one of many ckoud solutions to try and take care of all my hundreds of GBs but it doesn´t work well. Takes forever to backup and it keeps loosing contact with the external HDD i have connected through the time capsule.
This must be a very common need but I find no good solutions?!
Thanks!

You are right.. there is no decent solution from Apple..
You need a proper NAS.. not a backup target for TM.. which is what the TC is.
Look at Synology and QNAP.. they are not cheap but will work fine with Macs, TM even although it can be messy setting up. But the real NAS will auto backup to a USB drive.. plus the raid system offers protection against a dead drive.
Some people use a Mac Mini as a server.. (you don't need server version OS on it).. but the disk expansion is going to cost you as much as the true NAS.

ITunes library on external USB drive connected to Netgear R7000 router

I have my iTunes Library on an external USB hard drive. When the drive is connected directly to my iMac, I access the library by Option-Launching iTunes at which point I am asked to choose or create an iTunes Library. I choose the library on the external HD and everything is fine,
However when I connect the same HD to the USB3 port on my R7000, I am not able to choose the library successfully. When I Option-launch iTunes and select the iTunes library I get an error that says, "The iTunes application could not be opened. An unknown error occurred (13008)"
Curiously I am able to navigate to the Readyshare iTunes library. For example I can get too this file...
Jazz>iTunes Media>Music>Acoustic Alchemy>The New Edge> 01 Oceans Apart.m4a
and when I do a "quick look" on my iMac by pressing the space bar on that file, it plays. However when I double-click on that file, I get the same error that "The iTunes application could not be opened. An unknown error occurred (13008)"
Anyone have any idea what the problem is?

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

Single-user mode: How to mount and access an external USB drive?

My MacBook Pro HD is acting up. Cannot boot normally or into "safe mode". Cannot reinstall OS without wiping out the HD. Need to recover some critical files but DiskUtil First Aid and Restore options cannot successfully complete. Problem traced down to "invalid node structure" which means I either have a hardware problem or my filesystem partition directory structure is corrupted. I need to recover some files that are not backed up (timin issue with my regular backup process).
I can boot into single-user mode, mount the root file system (/sbin/mount -uw /) and can see/navigate the rot filesystem structure via good UNIX command line. Here's what I would like to do (in single-user mode):
1. Mount an external USB drive (250 GB already formatted as Mac OS X Extended)
2. Copy various files and/or directories from my HD to the external USB drive (UNIX cp command)
I realize I could go spend $$ for the Disk Warrior or Data Rescue products (or something similar) that SHOULD help me recover my HD or files, but it seems silly to do this when I can see, touch and taste them from within single-user mode....
Comments? Suggestions?
TIA --
Trent
P.S. Once I've recovered my files, I'll try to reformat the HD and then reinstall the OS. And THEN go have Apple look at my machine (thank goodness for AppleCare coverage)!

Resolution:
1) Boot system in single-user mode (SUM) with external HD attached.
2) Execute the following UNIX CLI commands once SUM boot process is completed:
# fsck -fy
# mount -uw /
# mkdir /Volumes/target_directory
# mount -t hfs -w /dev/diskXXX /Volumes/target_directory
# cp -RXv /source_directory /Volumes/target_directory
Where XXX is the device-level name for your external HD's data partition. In my case this was /dev/disk1s2. It may take some experimentation to identify this device name if your system has multiple HD's.
3) Verify contents were successfully copied onto the /Volumes/target_directory.
Comments and observations:
- Do NOT use "/" as your source directory - cp will make a second (redundant) copy of /volumes/target_directory
- I was able to successfully copy ALL files off my HD despite the fsck command's "invalid node structure" error message with this simple procedure. YMMV, depending on the state of your HD.
- The repeated disk0s2: I/O error warnings displayed during the SUM boot process did not seem to have a negative effect on this procedure. I also received this same error warning intermittently as I navigated the mounted filesystem did not seem to be a problem, either. Again, YMMV.
Commercial software:
I downloaded ProSoft Engineering's Data Rescue 3 product (trial version) before spending $99 to attempt to recover my "bad" HD's data via mounting to a good system with FW target mode. It could not successfully complete its "QuickScan" process and immediately hung on block 0 of 390M during its "Deep Scan" process. The product did seem to function properly on an operational system. ProSoft's technical support was responsive and helpful but had no answer for my "Deep Scan" error.
I did not attempt to use Alsoft's Disk Warrior 4 product. I could not find any trial software available and was reluctant to spend $100 based upon the mixed reviews and comments on this discussion forum as well as other reviews. Alsoft does claim to address the "invalid node structure" error in their marketing materials. Hindsight being 20/20 - I saved $100 by using this simple procedure.
Final note:
Neither Leopard nor Snow Leopard's installation DVD could recognize the bad internal HD when trying to do a reinstall. While DiskUtil was able to "see" the bad internal drive it immediately failed when I tried to do an "erase and format". Took the system to my local Apple store and the Genius ran a tool called "SMART Utility" from Volitans Software (www.volitans-software.com). SMART utility confirmed that my HD was bad so it was replaced. AppleCare pays for itself (once again!).

TimeMachine wearing out external USB drives??

I have noticed an issue with external USB drives connected to my iMac. I have been using one as a TimeMachine target and have had to replace three of them over the past two years as they eventually fail and no longer mount. I am not sure if it is an issue with TimeMachine or not, but I have noticed that the USB drive seems to spin up every 15 minutes even if there isn't a backup scheduled, which could be wearing it out prematurely. Once the iMac goes to sleep the drive does not spin up. My third drive started whining a few days back and Disk Utility will no longer repair the drive. Anyone with a similar issue?

Hiya mem16421,
this is definitely related to timemachine. the following could solve your issue:
{quote: wrote:}{quote}I spoke to apple about it today and they suggested the > following course of action:
1. disable time machine
2. delete the spotlight index on the external drive
3. allow spotlight to rebuild the index
4. re-activate time machine
The above is from another forum and pertains to 10.5.x. And it shows a console entry that might look familiar to yours. Maybe the failure is due to TM trying to write permanently to an incorrectly formatted drive or a drive that wants to "go to sleep"? (hence my previous comment).

Network Drives/External USB Drives?

If I have a NAS box on the network or a couple of external USB drives connected to computers on my network, will Network Magic "see" them and allow me to share folders on them with the rest of the network?
Thanks...

Cartaphilus1946 wrote:
Thanks for the prompt reply. I was hoping that since the USB drive will be mapped to a drive letter that it could be shared. But I guess not. I may just invest in a NAS interface like the one from Iomega for my USB drives.
Hi Cartaphilus1946,
What type of Interface is being employed by the USB Drives?
If SATA, you could move all the existing files and folders onto the computer, then buy either the D-Link DNS-321 or D-Link DNS-323 which has a built-in FTP Server. They use SATA Hard Drives.
Just a thought.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Recover from TM to external usb drive while in normal operation

I know only one point where the recovery process can be started, it is the recovery mode cmd+R.
As soon as in recovery mode the Mac is not available for other tasks.
The situation is that a TM backup resides in network.
We like to test that backup by recovering it to an external usb drive.
For this we need to boot in recovery mode.
However the test should take place in background so the regular tasks can continue normally.
How to start recovery from TM on network to external usb drive connected to Mac
but while Mac is in normal operation?

Aimed goal is quite simple.
Whole OS X Mavericks installation has to be restored from Time Machine backup, whereby
Time Machine backup is in LAN on some NAS
It has to be restored/recovered to usb drive connected to the Mac those TM backup is of
The recovery process has to run in background
In foreground the regular job can be conducted (means the OS X is in normal operation)

Can Time Machine backup USB Drive connected to Airport Extreme Base Station

I need a new N based wireless router. I would prefer to get just the $179 Base Station and not the $299 Time Capsule. I already have a nice external USB 500GB drive that I would connect to the AEBS. So, once I have this new wireless router/base station installed at home and I have the external USB drive connected to it, can my new Macbook Air with a USB connected 400GB drive be used to backup what is on the Macbook Air and also backup the 500GB USB drive info that is connected to the extreme base station?
Thanks
tj

I found this when searching Apple's web site but it is old, October 2007, and said it could not be done. Has this changed since then?
Here is what I found.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
* Last Modified on: October 26, 2007
* Article: 306833
Time Machine in Mac OS X 10.5 Leopard can be used to back up to many kinds of Mac OS Extended-formatted drives, but it does not support AirPort Extreme's AirPort Disk feature.
Time Machine can back up to another Mac running Leopard with Personal File Sharing, or to a Leopard Server volume, or an Xsan storage device.

Cannot mount external USB drive with FDisk_partition_scheme

Due to some recent mac issues in my lab, we updated one of the computers to Maverick 10.9.4 from Snow Leopard 10.6.8 yesterday. Anyhow, this seems to have erased the ability of the mac to read or mount several identical USB drives with the NTFS format (WD My Passport Ultra 500GB USB3.0). It could do it yesterday when it was OSX 10.6.8, but not today (OSX 10.9.4). The drives still work fine on other OSX 10.6.8, Windows 8.1 and Ubuntu 14.04 computers (this is appears to be a problem with the Maverick 10.9.4 operating system itself, rather than the flash drives which work flawlessly with every other computer I've tried). I want to remove data from the computer to create backups on the USB drives (no, I don't want to create an online backup or buy a new set of USB drives).
diskutil can see the drives, but cannot verify or repair them as they lack a GUID (GPT) partition scheme. I'm assuming this is the root of the problem. Manually mounting the drives does not work. Installing the ntfs-3g driver also did not work (I was using this to write to the NTFS drives until we upgraded OS's). Installing the WD Passport drivers for OSX also did not work. How do I get the mac to mount these drives?
I could reformat one USB drive and then copy to the others, but this would be extremely inconvenient and take days of copying files back and forth (and would prefer to fix the mac rather than go through this with every NTFS drive I own). If I did this, the FAT32 hard drive format would not be suitable, as format is unable to handle the extremely large sequencing datasets I need to transfer. I'm not super familiar with hard drive formats, but in the event we cannot get Maverick to actually work could someone possibly suggest a format able to handle large file sizes (the largest file I need to move is ~60GB) and be compatible with Windows 8.1 / OSX 10.9.4 / Ubuntu 14.04 as well?
Another workaround I thought of would be just to install an Ubuntu partition on the mac and get the files off through the Linux install. Which is also inconvenient, but would probably be faster than trying to reformat the drives and copy everything over onto them again given the amount of data I want to transfer.
Unrelated, but is there any way to view files and folders in the OSX root directory besides through Terminal? It seems like this functionality was also removed when we "upgraded" from Snow Leopard. (At this point, if it were up to me I would wipe all of the macs we own and replace them with Ubuntu... even the most minor of tasks always require some sort of workaround with them... at my wits end here ).

Yeah this definitely appears to be a problem specifically with this mac. It's been having all sorts of weird problems lately, and we figured that upgrading to Maverick might fix them (but instead we got new problems).
To give an update on this, I ended up reformatting one of the drives to HFS+ and disabled journaling. It now recognizes the drive again, and I'm pulling the files off that way. I looked at exFAT, but it looks like HFS+ has much better Linux support (Windows is read-only but that's only a minor annoyance, as the algorithms to process the data only run on UNIX machines anyways). It's a shame I couldn't keep using NTFS (had to copy over literally EVERYTHING again...) but whatever. Again, no solution for the issue (where this mac can't read NTFS drives).
@rkaufmann87 - To give a bit more explanation, we recently had to disable online backups because apparently the sheer amount of data causes Time Machine to freeze the computer and fail every time it has a scheduled backup (original issue we thought that upgrading to Maverick would solve... didn't work). The hard drive has been having a lot of issues when it begins to reach max capacity as well. So I am pulling off all of my files to external hard drives and deleting the local copy before we attempt to back up online again. And the data would probably take me a year and a lot of money to recreate (for the curious, it's high throughput sequencing data). I'm choosing not to take any chances as a result.

Cannot mount external USB drive

During a recent update I remember pacman asking about replacing some package with another package to handle disk mounting. I think the added package was "gnome-volume-manager" or "gnome-disk-utility" (or both). I didn't see any postings describing problems with doing this, so went ahead and allowed the change. Now it's a few days later and I find I cannot mount an external USB hard drive anymore. It has an entry in fstab, and although I have tried mutiple edits of the device to associate the drive with, nothing works.
The disk used to associate with /dev/sdb1. Now this device no longer exists. Here is what has happened to my /dev/sd* entries:
brw-rw---- 1 root disk 8, 0 2009-10-27 11:08 /dev/sda
brw-rw---- 1 root disk 8, 3 2009-10-27 11:08 /dev/sda3
brw-rw---- 1 root disk 8, 1 2009-10-27 11:08 /dev/sda1
brw-rw---- 1 root disk 8, 2 2009-10-27 11:08 /dev/sda2
brw-rw---- 1 root disk 8, 4 2009-10-27 11:08 /dev/sda4
brw-rw---- 1 root storage 8, 16 2009-11-04 13:00 /dev/sdb
Trying to force association with "/dev/sdb" "/dev/sda5" (or some other number not in use) or "sdb1" (or 2,3,4, whatever) just yields "special device ... does not exist".
Does anybody know how to deal with this?
Does anybody know what package(s) I replaced when the update in question took place? I think I'd like to reverse whatever happened.
And on another note, I think another gnome-based package also recently replaced a package relating to printing. Yesterday I discovered I have printing problems too:
At first there were no printers found. Although cups is supposed to start according to rc.conf, cupsd was not running. I started it manually and then all the printers showed up again, though I cannot print duplex (again, worked fine before). What is going on with these gnome packages?!? Anyone know which package(s) I need to remove (and then what to put back) to make printing work like it used to also?
thanks much.

oddly, fdisk -l shows nothing, even for disks which are mounted (eg. /dev/sda4). when I insert a standard USB thumb drive, the following show up properly:
brw-rw---- 1 root storage 8, 32 2009-11-05 10:50 /dev/sdc
brw-rw---- 1 root storage 8, 33 2009-11-05 10:50 /dev/sdc1
and I am able to mount and use the drive as usual.
The external drive I've been struggling with has xfs for filesystem type. After using the thumb drive, /dev/sdb showed up spontaneously, but no /dev/sdb1. attempting to mount gives:
mount: /dev/sdb is not a valid block device
or
mount: special device /dev/sdb1 does not exist
depending on which device is specified in fstab.
I am thinking that either a) my ability to mount xfs filesystems has somehow been hosed, or b) there is something wrong with drive, which must have spontaneously failed very recently (it is less than 1 yr old, but this happens from time to time).
If the drive is okay, any ideas about how mounting xfs filesystems could have been broken by recent upgrades?
btw, the fstab entry (which worked fine until a couple days ago) is: /dev/sdb1 /mnt/external_1 xfs rw,noauto,user,exec 0 0

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

I have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

i have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

Did you format the external disk on Windows? If you did this, probably the external disk is formatted in NTFS. OS X can't write on this format, so it's normal that it doesn't allow you to copy the files.
In this case, you have three possibilities:
1. Install Paragon NTFS. This program allows you to write on NTFS partitions.
2. Copy the hard drive content to your internal disk and format the external disk with Mac OS Extended (Journaled). Do it only if you are going to use the external disk only with OS X.
3. The same as the last one but formatting it with exFAT. This filesystem is compatible with Windows (XP, Vista, 7, 8) and OS X (10.6.5 and newer), so you can write and read files on external disks formatted with it on Windows and OS X, but you may have problems on Linux

I just want to mount my external USB drive (connected to AEBS)!!

Similar Messages

Maybe you are looking for