I keep getting a can not get mail message yet I'm getting mail

I Keep getting message "can not get mail" but im getting mail?

Hi Mel82384,
Do you have multiple email accounts on your iPhone? It is possible that one (or more) of them are functioning correctly and others are not. I would suggest that you troubleshoot using the steps in this article - 
iOS: Troubleshooting Mail
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    What OS are you running.. this is usually only a problem in Mavericks.
    If so I recommend you mount the hard disk manually..
    Use Go, Connect to server.
    Type in the IP address if static.. eg
    AFP://10.0.1.1
    Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
    Type in
    AFP://TCname.local Where TCname is replaced with the actual name.
    You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
    Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

  • My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

    My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

    Connect the iPod to your syncing computer and restore it via iTunes.  However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup.  For recovey mode see:
    iPhone and iPod touch: Unable to update or restore
    "If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
    Above is from:
    http://support.apple.com/kb/ht1212

  • I have just downloaded all of my music into the new itune's however all of my music has an "!" buy it and I get an error saying "original file can not be found". How do I get my music back?

    I have just downloaded all of my music into the new itues, however; all of my music has an "!" but it and I get an error that says " original file can not be found".
    How do I get my music back?

    Ok, I had a glitch, forced to restart, and lost my train of thought.
    Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
    But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
    If you moved the itunes folder, it needs to go back.
    I can't  download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
    You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
    If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

  • I can not download Adobe reader. I am getting error message 1936. Can you help?

    I can not download Adobe reader. I am getting error 1936. Can you help?

    What is your operating system?  Is there anything else beside the number 1936?

  • I got a movie (the mist) from the itoons store. My ipad says I can not be played. How do I get this to work on my IPad?

    I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

    can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • HT2731 Can not open Itunes on my computer,i get error msg MSVCR80.dill is missing from your computer . What do i do?

    Can not open itunes on my computer,I get error msg MSVCR80.dill is missing from your machine. What do I do?

    Work through the user tip: https://discussions.apple.com/docs/DOC-6562

  • I can not uninstall bonjour or itunes.  I get a error message that it is on a netwok resource that is unavailable.  help get it off so i can load a newer version.

    I can not uninstall bonjour or itunes. I get a error message that it is on a netwok resource that is unavailable. help get it off so i can load a newer version.
    I had a issue when my bonjour was deleted so I tried to delete all apple itms and then reinstall them but a few are left behind and I can not delete them so that when I try to reinstall itunes a error comes up that it can not delete a older version. Help me delete or fix this.

    Doublechecking before proceeding:
    so that when I try to reinstall itunes a error comes up that it can not delete a older version.
    At that point in time is it saying that it can't remove the older version of itunes or the older version of bonjour? (Either could be possible in this context, given your other symptoms, and whichever one is mentioned will make a difference to the treatment method.)

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • I use google with firefox, everytime i open firefox and begin browsing or go to check my mail i get a firefox not responding error message on top left of screen. How do i get rid of this?

    Question
    I use google with firefox, everytime i open firefox and begin browsing or go to check my mail i get a firefox not responding error message on top left of screen. How do i get rid of this?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

    When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
    == This happened ==
    Every time Firefox opened
    == I tried to download firefox. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

    When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
    When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
    If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
    Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

  • I cannot open Beats Audio. Get a, "Can not find startup file" message

    I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon  I get a, "Can not find startup file" message

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ```````````````````````````````````````
    If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Can not find some messages in Mail using search

    I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

    Hi lnaki vila
    I'm using pi 7.0 version
    i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
    in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
    i'm getting the response that's fine because its a synchronous communication
    i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to  ENGINE_TYPE and current value is HUB(Integration server)
    thanks in advance
    regards
    Satish

  • How do I get past, "Can't save preferences message" in PS CS6?

    Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.
    Get me past this message. Please! Nothing I have read applies exactly to eliminating this infuriating message. How do I get past, “Can’t save preferences message” in PS CS6?
    Message was edited by: RustyBucket12

    Thanks for showing an interest… But!
         I have tried all the regular stuff. This problem only showed up in OSX Lion. Up till then all was well at Snow Leopard and Adobe CS5.5 Suite. After upgrading to OSX Lion all Hell broke loose. Quite a catastrophe of conflicts. In Design wouldn’t launch. A problem with Suitcase Fusion 4. But PS CS6 had two major problems. One the Epson Artisan 835 could not be seen in Imports. A conflict between 32 and 64 bit formats and again, drivers. But the most persistent and perplexing problem has been that of the preferences. Oh and one other thing, whenever you quit the program, PS CS6, a message appears saying that the program has quit for no good reason and did I want to send a report to Adobe and/or Mac. Well I must have sent them a thousand reports. What I most suspect is file damage and incompatibility. What I have tried has not found the files to replace those that will reset themselves. i.e. .plst etc. without buggering up the works. I have tried to figure out what might have caused such changes between Snow and Lion other than the well known differences regarding supported stuff, formats and out of date software i.e. Rosetta. Some how or other I suspect damaged files. The kind of damage where a single character is missing and nothing works but no file checker in the world can detect as screwing up the works. Now in several cases a lot of re-installation has been done. But again no help. So putting a finger on the culprit file(s) has not been easy. Fortunately this machine has four active drives so reverting back to where all was OK is easy. But as for going forward, well that is at a standstill.
        So, if any body out there has any insight to these three problems I would be most interested to see what you got.
    Many Thanks

Maybe you are looking for