I keep getting a Fatal Exception Error on start up, and I can only run in safe mode on my dv6
I keep getting a Fatal Exception Error on start up, and I can only run in safe mode on my dv6, can anyone please help? I don't really want to reset it back to factory defaults as I will have to re-install everything. I have tried going back via system restore, but it keeps telling me that there are no restore points? I am running Windows7 64 bit OS
Thanks in advance.
This question was solved.
View Solution.
Hi,
Start the notebook in Safe Mode and let Windows fully load. Hold down the Windows key and press R. In to the Run box type msconfig and hit enter. In the following window, click the Start up tab, remove the tick next to each start up item and then click Apply to make the change. Restart the notebook and see if it now boots normally. If it does, re-enable one start up item at a time, click Apply and reboot to check if it still runs ok. Keep doing this until you encounter the problem and you will know the last program you set to start is causing the issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?
> So now my question is, how can i fix this problem?
Use the Toshiba recovery disk or the Toshiba HDD recovery option.
If you dont have the Toshiba Recovery disk try the HDD recovery:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
This works only if the recovery image files from Toshiba are still on the HDD:
If you installed the system using another disk as Toshiba recovery disk, this recovery option will not work. -
Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
NVDA(Video): Channel exception! exception type = 0x1 = Fifo: Fifo Method Error
NVDA(Video): Channel exception! exception type = 0x6 = Fifo: Parse Error
My iMac freezes and crashes and I get the above message in the kernel log. I have done a few reinstalls from time machine but it comes back.
I get to the point where I want to erase the disk and do a clean install but I get afraid that the kernel will panic during install/ I will lose the registration keys to software/ or that I am just wasting my time.
Has anyone truly fixed this? Is an erase and install going to help?
My first crash happened a week or so after updating to 10.6.8. I was watching videos in full screen mode. When I pressed esc it froze. (Sometimes the audio continues but the iMac is frozen.)
So I stopped use Chrome but it followed me to Safari. I like YouTube Videos and can't watch them in safe mode -no sound.
After installing from a time machine back-up and just re-installing my Mac will boot normally but it doesn't last long and I often can't even boot to CD. It sometimes crashes in the finder.
What's going on?
This computer is old but should have tons of life left- if you've been here how did you get out of this mess?
How much is it going to cost me to get my computer back?
I can't do a hardware test because I don't know where the original disks are but tech tools and the system profiler assure me everything is OK.
Any moral support is welcome.It could be a failing drive or logicboard (GPU), it is old and has probably served you well, you can take to an Apple store and they will diagnose it for free, and give you your options, but it is old and are you willing to pay much money to have it repaired? You are probably better off replacing it.
There is some software for data ercovery such as Disk Warrior, but it's not cheap.
Or ask about this program
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
You can try shutting down and try a SMC reset
http://support.apple.com/kb/HT3964
and see if it will boot, if it does try to do a back up, but something sounds as though it may be in failure mode.
Good luck -
Why do I keep getting messages from Vista saying Firefox has a serious virus? Also I can't bring up the icon to let me do the scan.
You should never respond to such messages as they are only scams to get you to buy their software.<br />
If you install that software and "let it scan" then you will most likely get infected with malware. -
I keep getting a green screen whenever I play videos and I can't find the "Display" Settings
In fact, I don't think I even have a "Display" box. I looked at the step by step tutorial but whenever I right click there is not "display" box. I'm using a Windows 8 laptop. And the problem started a few days ago. Every video I play is green screen. I thought it was just on youtube but I went to other websites and it's the same problem. How can I fix this? Please help, thank you!
"Green" stuff usually indicates a conflict with the graphics drivers, but I would think that that Windows 8 would have the latest drivers already installed.
What is your display adapter, device driver & date? See http://forums.adobe.com/thread/945765 -
Error Message Employee Group must be 9 and Subgroup can only be- Terminatio
Hi Gurus,
I am trying to execute the Action Termination with action reason 71- Retiree normal. In the Actions infotype IT0000. I am getting the below error. I have checked all the configuration checked T529A, T503*, T528B etc... All are maintained correctly. When trying to execute with other action reason it is getting saved.
Employee Group must be 9 and Subgroup can only be
Message no. Z7016
Appreciate help from any of the SAP Gurus.
Thanks
Naveen AvalurHi Donnie,
Thanks for your quick turnaround. The answer was very helpful. We are working along with our programmers.
Will let you know if the solution is found.
Thanks
Naveen Avalur -
Error message says "This page requires a plugin that can only run in 32-bit mode"
When I try to write an email from my BT site I get the following message
"This page requires a plugin that can only run in 32-bit mode"
Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
I have only had this problem since updating to the latest FirefoxPrevious versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.
-
I can't update, I keep getting a "Fatal error during installation. Error 1603" message
I can't update, I keep getting a "Fatal error during installation. Error 1603" message
ireeeeen wrote:
Oh it's from photoshop elements 5.0
hopefully you can answer my question
You'll have more luck in the Elements forum:
http://forums.adobe.com/community/photoshop_elements -
HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.
I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.
There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before. -
Fatal exception errors after IE7 upgrade
After accepting the MS Auto update of IE6 to IE7 I had "Fatal
exception error - DW is terminating" even when clicking on Help.
Errors included "Browse_back enabled in toolbars.xml" and "get
CurrentValue in AddressURL.htm" when trying to switch between
loaded pages.
I tried re-installing Dreamweaver MX but the problems didn't
disappear until I used the Uninstall IE V7 option in Windows
Add/Remove programs (not the one in Windows Components) - which
removes V7 and rolls back to V6.
Having wasted some hours and had severe stress and finding no
solutions on the MS website, Adobe support or with Google - I
thought I would share my experience to help others with the same
problem.I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
For this issue, you can contact Microsoft support directly(http://support.microsoft.com). -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Trying to redownload but keep getting a "lost connection error"
In the past, I had some problems with my laptop so I recently re-installed Windows 7 yesterday. I got everything running fine. But today, I am having problems with flash player. Youtube videos don't play correctly and some websites don't display like they are supposed to. So, I tried redownloading adobe flash player, but I keep getting this "Lost connection" error. What is the problem and how do I fix it? I'm using FireFox, btw. It seems to work on Google Chrome but I like using FireFox better.
Try using these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are taking a long flight this week, and I wanted to have something new to watch. I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
If I can get them to download them on my iMac computer, can I then transfer them to my iPad? How is this done? (Please pardon an older lady's ignorance, and thank you for any assistance!)
JodyHello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.
Maybe you are looking for
-
To add a new condition type in Sales order programatically
Hello, I want to add a condition type (ZXXX) with an amount in sales order programatically. I want to add the condition type in the item. I am able to add the price (amount) and condition type (ZXXX) manually in the sales order through t code crmd_or
-
File to IDOC:how do i relate inbound idoc with generated idoc in the R/3
hi experts; can any body tell me how can i relate the IDOC number genrated in the PI with the generated IDoc number in the SAP R/3 system for file to IDOC scenario? in SAP PI for tcade idx5, idoc no is:12002 but in SAP R/3 in tcode WE05, idoc no is:8
-
Add one more segment in item Category Key Flexfeild
Hi I want to add one more segment in item Category Key Flexfeild and that is not a mandatory feild. What are the implications if I add one more segment in KFF? Does it effect anywhere in the system? Please let me know your thoughts. Thanks
-
Again same problem error 0xE8000003 pls help again i don't know it keep doing that
Again same problem error 0xE8000003 pls help again i don't know it keep doing that please help with that
-
Wrong JSP page in the Browser text field
Hi, I'm using Glassfish as JSF Container and have some strange problem with JSF navigation. The navigation itself works but according to the JSF spec the browser address field should stay the same for all pages/outcomes if 'redirect' is not specified