I keep getting a partial frame from the same website on the left side of the screen no matter what I'm viewing. How do I get rid of it?

I even removed the site that keeps appearing on the left side as a bookmark. It is always the same. I've tried right click "This Frame" and all the resulting options to no avail.
I just want the link I choose to fill the entire screen without about 20% being used up by the same partial frame on the left side.

Oh, that's part of Voice Over? Ok, I had the audio turned off, so I wasn't hearing anything, hence my confusion.
Awesome, thanks for your help!
Dave

Similar Messages

I have updated my iPad 2 to 7.0.2. After syncing to iTunes I noticed that in Safari on my MacBook Pro one of the Bookmark tabs has been emptied. Also, on the iPad I am getting a dark keyboard that stays on the screen no matter what is going on behind it

Lots of strange things happening after installing 7.0.2. Mail and Safari routinely quit on me. Keyboard appears for no reason and doesn't go away. After syncing to iTunes on my MacBook Pro one of the bookmark tabs got emptied out. Is there no one cracking the whip anymore at Apple?

Using iCloud to sync bookmarks between your Mac and iPad?
If so, on the iPad tap Settings > iCloud. Swich Safari off then back on.
On your Mac, open System Preferences > iCloud
Deselect the box next to Safari then reselect it.
Give iCloud a few minutes to re sync your bookmarks.
If you are using iCloud, don't sync Safari bookmarks on iTunes. That could be why the bookmark tabs got emptied out.

My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I wen

Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?

Sync with the same computer iTunes that you normally sync with.

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.

Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

I just bought the AIrport Extreme to replace an older Linksys wireless g router. But I am still getting a fairly low signal, not showing much improvement from the previous router. What gives?

I just bought the airport extreme router to replace my older linksys g router because of a poor signal. Now that I have the new router running, I'm not seeing much improvement from the previous router! What gives?

I too recently bought the Extreme to replace an old Linksys G and discoverd that the range of the new Extreme was surprising less than the Linksys.
Nothing had changed otherwise; both routers were installed in the same place (on floor, under a cabinet in the middle of my house).
I returned the Airport Extreme to Amazon and bought another (the latest version), and the same problem exists, i.e., I can't get a signal at the corners of my small home with the Airport, where I once could with the Linksys.
I'm puzzled, but think that difference must be that the Linksys has 2 large external antennas and the Extreme's antennas are mounted internally.
I've also noticed that Apple sells a wall mount for the Airport Extreme and am assuming this is to get the Airport up and out into the open in order to improve its 'send and receive' characteristics, no?
If your Extreme is hidden in a cabinet or under some piece of furniture, I suggest you move it into the open and see if this helps extend its range.
Hope this helps.
John

After updating an app, the app disapears from the screen and is not accesible anymore. In "aankopen" I can not download the game again. There is no little cloud behind it anymore where I can click on. How can I get the app on my tablet again?

After updating the app blitz brigade, the app disapears from the screen and is not available anymore. It is not possible to download it again because there is no cloud behind it anymore in the app store. But I made in app buys, so I spend a lot of money and now I can not acces the game. Does anybody know how I can get acces again to my game and get my levels back as well?

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

Have the same problem here... don't know what to do...

I have deleted the speed dial from the browser unfortunately, so what should i do to get it back

i have deleted the speed dial from the browser unfortunately, so what should i do to get it back . please get me the solution as soon as possible

The Speed Dial extension is available for download here:
https://addons.mozilla.org/en-US/firefox/addon/speed-dial/

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer.

Making simple Cross desolves at the end of still photo clips from my library. Not making a clean disolve beteen. Single frames from the previous clip are flashing half way through the desolve. Did both a drag and drop and insert disolve.

Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.

Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.

How do I continually loop frames with a 20 second pause in each frame from the same scene without going to the next scene?

How do I continually loop frames with a 20 second pause in each frame from the same scene without going to the next scene? There are buttons for the other scenes in these frames. The below works well until I am at the last frame in scene one, then it goes to the next scene and plays. How can I make scene one a continually loop.
stop();
var timer:Timer = new Timer(20000,0);//<--
timer.addEventListener(TimerEvent.TIMER, timerHandler);
timer.start();
function timerHandler(event:TimerEvent):void {
    this.nextFrame();
    //or if you want to jump e.g 5 frames
    this.gotoAndStop(this.currentFrame+5);
Thank you for any help.

For this code to work, you need to empty the first frame and place all the photos a frame ahead. Then, place this code on the first frame. DONE!
If you need more help, I'll try to answer it the fastest I can.
Oh, and I could actualy make your photos fade out and fade in as they rotate from frame to frame, it would be awesome. Just tell me if you want me to do it. Good luck
import flash.display.Scene;
import flash.events.TimerEvent;
stop();
var timer:Timer = new Timer(2000,0);
timer.addEventListener(TimerEvent.TIMER, timerHandler);
timer.start();
function timerHandler(event:TimerEvent):void {
if (this.currentScene.name == "Scene 1") {
if (this.currentFrame != this.currentScene.numFrames) {
   this.nextFrame();
} else {
   this.gotoAndStop(2);
nextFrame();

I keep getting a partial frame from the same website on the left side of the screen no matter what I'm viewing. How do I get rid of it?

Similar Messages

Maybe you are looking for