I keep getting a pop up to install firebug and its getting really irritating. I think it could harm my computer (because my computer has warned me it might be a virus). How can i make the pop up go away?
you keep sending a pop up message saying that i need to install firebug. Its getting annoying... really annoying. Please make it go away. My computer warns me it might be a virus or affect my computer in some way. I see no need for this firebug. Just make the pop up go away please.
''moderator deleted the email address in the title of this thread - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines''
You probably installed an extension which requires Firebug to be installed. Get rid of that extension and that message won't appear any more.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Similar Messages
-
HT5129 How can I make this pop up go away?
How can I make the mobile me pop up go away, do not use, never have, use the cloud.
You probably installed an extension which requires Firebug to be installed. Get rid of that extension and that message won't appear any more.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
Pop Up - how can I make the window in the backround visible?
Hi,
when I create a popup, the window in the background becomes unvisible as long as the popup is not closed. how can I make the background window become visible when the popup is open? I can hardly believe, that such a basic feature is not supported. But on the other hand, I also have some problemes with the sizing of the pop up...
Help is highly appreciated.
Kind Regards
Felix...just found this thread. And I am not very happy about what I read. Is your system 701 or higher?
Re: Confirm Popup in Web Dynpro, window size
Cheers
Felxi -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below -
How can i make the optimiser to skip this full table scan ??
Hi,
I am trying to tune the below query, I have checked up all the possibilities to skip the full table scan on vhd_calldesh_archive, But am unable to find the predicate in the where clause, which is letting the optimiser to choose the full table scan on vhd_calldesk_archive table, which is very large one. how can i make the optimiser to skip this full table scan.
Please check the below sql script and explain plan ,
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name,
c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id,
f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc,
a.received_time,a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS resolved_min,
CASE
WHEN a.orgid in (1,100,200) THEN a.orgid
ELSE j.regionorgid
END AS region
,(SELECT coalesce(MAX(upddate),a.upddate) FROM lcc.vhd_callstatus stat WHERE stat.call_id = a.call_id
) as stat_upddate
,(SELECT team_desc from lcc.vhd_teams t where t.team_id = a.assignment_team) as team_desc
,a.eta_date
,coalesce(a.caller_contact, b.telephone) AS caller_contact
,coalesce(a.caller_email, b.email) as email
,a.affected_users
,a.outage_time
,a.QA_DONE
,a.LAST_ACTION_TEAM
,a.LAST_ACTION_USER
,INITCAP (k.full_name) AS last_action_username
,a.last_action_date
,l.team_desc as last_action_teamdesc
,a.refid
,INITCAP (lu.full_name) AS logged_name
,a.pmreview
,a.status as main_status
FROM lcc.vhd_calldesk_archive a
LEFT OUTER JOIN lcc.lcc_userinfo_details b ON b.user_name = a.caller_id
INNER JOIN lcc.com_organization c ON c.code = a.orgid
INNER JOIN lcc.vhd_applications d ON d.appl_id = a.appl_id
INNER JOIN lcc.vhd_modules e ON e.appl_id = a.appl_id AND e.module_id = a.module_id
INNER JOIN lcc.vhd_calltypes f ON f.call_type_id = a.call_type_id
INNER JOIN lcc.com_rptorganization j ON j.orgid = a.orgid AND j.tree = 'HLPDK'
LEFT OUTER JOIN lcc.lcc_userinfo_details g ON g.user_name = a.upduserid
LEFT OUTER JOIN lcc.vhd_callmode h ON h.mode_id = a.mode_id
LEFT OUTER JOIN lcc.vhd_environment i ON i.appl_id = a.appl_id AND i.env_id = a.env_id
LEFT OUTER JOIN lcc.lcc_userinfo_details k ON k.user_name = a.last_action_user
LEFT OUTER JOIN lcc.vhd_teams l ON l.team_id = a.last_action_user
LEFT OUTER JOIN (select CALL_ID,upduserid FROM lcc.VHD_CALLDESK_HISTORY P where upddate
in ( select min(upddate) from lcc.VHD_CALLDESK_HISTORY Q WHERE Q.CALL_ID = P.CALL_ID
group by call_id)) ku
ON ku.call_id = a.call_id
LEFT OUTER JOIN lcc.lcc_userinfo_details lu ON NVL(ku.upduserid,A.upduserid) = lu.user_name;
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2104 | 3667K| 37696 |
| 1 | UNION-ALL | | | | |
| 2 | NESTED LOOPS OUTER | | 2103 | 3665K| 37683 |
| 3 | VIEW | | 2103 | 3616K| 35580 |
| 4 | NESTED LOOPS OUTER | | 2103 | 823K| 35580 |
| 5 | NESTED LOOPS OUTER | | 2103 | 774K| 33477 |
| 6 | NESTED LOOPS OUTER | | 2103 | 685K| 31374 |
| 7 | NESTED LOOPS | | 2103 | 636K| 29271 |
| 8 | NESTED LOOPS | | 2103 | 603K| 27168 |
| 9 | NESTED LOOPS OUTER | | 2103 | 558K| 25065 |
| 10 | NESTED LOOPS OUTER | | 2103 | 515K| 22962 |
| 11 | NESTED LOOPS | | 2103 | 472K| 20859 |
| 12 | NESTED LOOPS | | 2103 | 429K| 18756 |
| 13 | NESTED LOOPS OUTER | | 4826 | 890K| 13930 |
| 14 | NESTED LOOPS OUTER | | 4826 | 848K| 9104 |
| 15 | NESTED LOOPS | | 4826 | 754K| 4278 |
|* 16 | TABLE ACCESS FULL | COM_RPTORGANIZATION | 75 | 1050 | 3 |
| 17 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK | 64 | 9344 | 57 |
|* 18 | INDEX RANGE SCAN | VHD_CALLDSK_ORGID | 2476 | | 7 |
| 19 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 20 | FILTER | | | | |
| 21 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 22 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 23 | FILTER | | | | |
| 24 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 25 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 26 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 27 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 28 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 29 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 30 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 31 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 32 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 33 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 34 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 35 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 36 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 37 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 38 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 39 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | 1 |
|* 40 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 41 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 42 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 43 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 44 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 45 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 46 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 47 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 48 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 49 | NESTED LOOPS OUTER | | 1 | 1785 | 13 |
| 50 | VIEW | | 1 | 1761 | 12 |
| 51 | NESTED LOOPS OUTER | | 1 | 1656 | 12 |
| 52 | NESTED LOOPS OUTER | | 1 | 1632 | 11 |
| 53 | NESTED LOOPS OUTER | | 1 | 1608 | 10 |
| 54 | NESTED LOOPS | | 1 | 1565 | 9 |
| 55 | NESTED LOOPS | | 1 | 1549 | 9 |
| 56 | NESTED LOOPS | | 1 | 1535 | 9 |
| 57 | NESTED LOOPS OUTER | | 1 | 1513 | 8 |
| 58 | NESTED LOOPS OUTER | | 1 | 1492 | 7 |
| 59 | NESTED LOOPS | | 1 | 1471 | 6 |
| 60 | NESTED LOOPS | | 1 | 1450 | 5 |
| 61 | NESTED LOOPS OUTER | | 1 | 1430 | 4 |
| 62 | NESTED LOOPS OUTER | | 1 | 1421 | 3 |
| 63 | TABLE ACCESS FULL | VHD_CALLDESK_ARCHIVE | 1 | 1401 | 2 |
| 64 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 65 | FILTER | | | | |
| 66 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 67 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 68 | FILTER | | | | |
| 69 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 70 | TABLE ACCESS BY INDEX ROWID| VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 71 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 72 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 73 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 74 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 75 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 76 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 77 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 78 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 79 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 80 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 81 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 82 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 83 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 84 | TABLE ACCESS BY INDEX ROWID | COM_RPTORGANIZATION | 1 | 14 | |
|* 85 | INDEX UNIQUE SCAN | COM_RPTORG_PK | 1 | | |
| 86 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | |
|* 87 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 88 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 89 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 90 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 91 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 92 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 93 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 94 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 95 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
Predicate Information (identified by operation id):
16 - filter("J"."TREE"='HLPDK')
18 - access("J"."ORGID"="A"."ORGID")
20 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
22 - access("SYS_ALIAS_2"."CALL_ID"="A"."CALL_ID")
23 - filter(MIN("Q"."UPDDATE")=:B1)
26 - access("Q"."CALL_ID"=:B1)
28 - access("H"."MODE_ID"(+)="A"."MODE_ID")
30 - access("D"."APPL_ID"="A"."APPL_ID")
32 - access("F"."CALL_TYPE_ID"="A"."CALL_TYPE_ID")
34 - access("L"."TEAM_ID"(+)="A"."LAST_ACTION_TEAM")
36 - access("I"."APPL_ID"(+)="A"."APPL_ID" AND "I"."ENV_ID"(+)="A"."ENV_ID")
38 - access("E"."APPL_ID"="A"."APPL_ID" AND "E"."MODULE_ID"="A"."MODULE_ID")
40 - access("C"."CODE"="A"."ORGID")
42 - access("K"."USER_NAME"(+)="A"."LAST_ACTION_USER")
44 - access("B"."USER_NAME"(+)="A"."CALLER_ID")
46 - access("G"."USER_NAME"(+)="A"."UPDUSERID")
48 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_4"."UPDUSERID_162","SYS_ALIAS_4"."UPDUSERID_25"))
65 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
67 - access("SYS_ALIAS_2"."CALL_ID"="SYS_ALIAS_1"."CALL_ID")
68 - filter(MIN("Q"."UPDDATE")=:B1)
71 - access("Q"."CALL_ID"=:B1)
73 - access("H"."MODE_ID"(+)="SYS_ALIAS_1"."MODE_ID")
75 - access("D"."APPL_ID"="SYS_ALIAS_1"."APPL_ID")
77 - access("F"."CALL_TYPE_ID"="SYS_ALIAS_1"."CALL_TYPE_ID")
79 - access("L"."TEAM_ID"(+)=TO_NUMBER("SYS_ALIAS_1"."LAST_ACTION_USER"))
81 - access("I"."APPL_ID"(+)="SYS_ALIAS_1"."APPL_ID" AND "I"."ENV_ID"(+)="SYS_ALIAS_1"."ENV_ID")
83 - access("E"."APPL_ID"="SYS_ALIAS_1"."APPL_ID" AND "E"."MODULE_ID"="SYS_ALIAS_1"."MODULE_ID")
85 - access("SYS_ALIAS_1"."ORGID"="J"."ORGID" AND "J"."TREE"='HLPDK')
87 - access("C"."CODE"="SYS_ALIAS_1"."ORGID")
89 - access("B"."USER_NAME"(+)="SYS_ALIAS_1"."CALLER_ID")
91 - access("SYS_ALIAS_1"."UPDUSERID"="G"."USER_NAME"(+))
93 - access("K"."USER_NAME"(+)="SYS_ALIAS_1"."LAST_ACTION_USER")
95 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_3"."UPDUSERID_162","SYS_ALIAS_3"."UPDUSERID_25"))
Note: cpu costing is offI've tried to look thru your sql and changed it a bit. Of course not testet :-)
Your problem isn't the archive table! I tried to remove the 2 selects from the select-clause. Furthermore you have a lot of nested loops in your explain, which is a performance-killer. Try getting rid of them, perhaps use /*+ USE_HASH(?,?) */.
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name, c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id, f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc, a.received_time, a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS resolved_min,
CASE
WHEN a.orgid IN (1, 100, 200)
THEN a.orgid
ELSE j.regionorgid
END AS region,
COALESCE (stat.upddate, a.upddate) AS stat_upddate,
t.team_desc, a.eta_date,
COALESCE (a.caller_contact, b.telephone) AS caller_contact,
COALESCE (a.caller_email, b.email) AS email, a.affected_users,
a.outage_time, a.qa_done, a.last_action_team, a.last_action_user,
INITCAP (k.full_name) AS last_action_username, a.last_action_date,
l.team_desc AS last_action_teamdesc, a.refid,
INITCAP (lu.full_name) AS logged_name, a.pmreview,
a.status AS main_status
FROM lcc.vhd_calldesk_archive a, lcc.lcc_userinfo_details b, lcc.com_organization c,
lcc.vhd_applications d, lcc.vhd_modules e, lcc.vhd_calltypes f, lcc.com_rptorganization j,
lcc.lcc_userinfo_details g, lcc.vhd_callmode h, lcc.vhd_environment i, lcc.lcc_userinfo_details k,
lcc.vhd_teams l,
(SELECT call_id, upduserid
FROM lcc.vhd_calldesk_history p
WHERE upddate IN (SELECT MIN (upddate)
FROM lcc.vhd_calldesk_history q
WHERE q.call_id = p.call_id
GROUP BY call_id)) ku,
lcc.lcc_userinfo_details lu,
(SELECT call_id, MAX (upddate)
FROM lcc.vhd_callstatus
GROUP BY call_id) stat,
lcc.vhd_teams t
WHERE a.caller_id = b.user_name(+)
AND a.orgid = c.code
AND a.appl_id = d.appl_id
AND a.appl_id = e.appl_id
AND a.module_id = e.module_id
AND a.call_type_id = f.call_type_id
AND a.orgid = j.orgid
AND j.tree = 'HLPDK'
AND a.upduserid = g.user_name(+)
AND a.mode_id = h.mode_id(+)
AND a.appl_id = i.appl_id(+)
AND a.env_id = i.env_id(+)
AND a.last_action_user = k.user_name(+)
AND a.last_action_user = l.team_id(+)
AND a.call_id = ku.call_id(+)
AND NVL (ku.upduserid, a.upduserid) = lu.user_name(+)
AND a.call_id = stat.call_id
AND a.assignment_team = t.team_id; -
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I make the sort default "by date" in iPhoto?
On one of my computers, every time I load an event, it goes to the top of the library and I have to go to "sort/by date" to get it to go to the end or bottom of the library...where I want it.
On my other computers, the default seems to be "by date" normally....
How can I make the default sort option "by date?"
Thanks.I am not by that computer now. But that makes sense.
I combine events that are imported into that iPhoto. I suppose that would qualify as manually sorting....right?
Still, shouldn't there be a way to overide that and make "date" the default. That is, if your observation is correct.
(I'll take a look tomorrow....)
Thanks!! -
With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?
I got the 5s and everytime I try and change the picture on my lock screen the picture is 10x way to big. I try and resize it and make it smaller but it will nto get smaller.
How can I fix this?See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
How can I make the marker event pulse width longer in NI-FGEN?
I want to generate a marker event on PF0 line using NI-FGEN.I can set the marker event pulse width but when I was trying to make the pulse width units as 65 I was getting an error-1074115931.
How can I make the marker event pulse width longer without using script as I am using PXI-5412 which is not supporting Script.
Can anyone help me out in doing the same?Unforunately, as you mentioned, the PXI-5412 does not support scripting mode. This will limit you to 1 marker using sequence mode. However, the PXI-5421 and PXI-5422 would allow the functionality.
As far as making the pulse width longer, and as the KnowledgeBase Article that you linked to discusses, I don't think it will be possible to create a marker as long as 1us - 10ms using just the Marker properties and without using scripting. You can still try to do this with property nodes and see if you can get a usable result. Start with an example such as "Fgen Arb Waveform Marker" and use the "Marker Position" value to set the start time (you would want 0 here it looks like), and then "Marker Event Pulse Width Value" to change the pulse length, but again I am afraid you will probably reach the maximum of 640 ns here. If you're not able to get this going with the property node, you will need either a FGEN card that supports scripting or another card that does Digital I/O to accomplish this.
Thanks!
Stephanie S.
Application Engineer
National Instruments -
How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?
How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.
Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button. -
HOW CAN I MAKE THE GRIDLINES IN A NUMBERS SPREADSHEET PRINT
I have created a numbers spreadsheet, but when I print it, there are no gridlines. Because the spreadsheet is a page and a half wide it is hard to follow across to get to the right data. How can I make the gridline print?
Question asked and answered several times.
Enter the Inspector of Tables and define the borders to fit your needs.
Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 20:34:59
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
How can i make the order in PDF?
Dear experts,
Can any one help me with user exit or BADI to obtain the number spool the order (ME23N) when save the order. I need converted the order in PDF.
How can i make the order in PDF?.
Thanks in advence,
Regards,
Alejandro.open the print program associated with output type and make changes to get pdf.
see these link for code
[smartform pdf|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/smartform%2boutput%2bto%2bpdf%2bformat]
[scriipt pdf|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/converting%2bscripts%2boutput%2binto%2bpdf%2bform]
Maybe you are looking for
-
Hi all! I am considering buying the ViewSonic VX2240w 22" LCD monitor http://www.viewsonic.com/products/lcddisplays/xseries/VX2240w/ Do you think it will look alright when I hook it up w/ DVI/VGA cable with my 15" MacBook Pro (lowest MBP model) I'll
-
Accessing LDAP in a custom JAAS login module
Hi, I have developed a custom jaas login module in CE 7.1. I created a java dc which contains a class extending AbstractLoginModule. This DC is deployed on to the server using an EAR DC. I am trying to access LDAP in the custom login module. I am try
-
How to make an standalone java application that uses mysql driver
Hi, I have an application that makes connection to a mysql database, on my computer, I set on classpath the driver address, so everithing works fine. The problem is that I want to execute my application from other computers, where the classpath does
-
Buttons for the slideshow are broken
Hi, new to iWeb and all the web composing stuff so I may miss something. I made slideshows from my albums on a site i'm currently building but suddenly, the left and right arrows and pause buttons don't appear anymore. I checked the published site on
-
I have spent a lot of time searching for a way to remove plugins. I have found lots of work-rounds and lots of people criticising this lack of a built in option. Allowing plugins to be silently install is a security risk and causes stability issues.