I keep getting a "Transcoding error" when I try to burn a blu ray. I have elements 8 and the clip is only about 8 1/2 minutes long

I have 4gb of ram and running Vista. Dont know why I keep getting this error, its not like I'm burning a full 2 hour movie.
any help would be appreciated.

b
Thanks for the update.
Please remind me, are you still working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1, and are your plans to incorporate your new internal hard drive into the Windows Vista 32 bit computer setup?
In Photoshop Elements 8, the path to the Scratch Disks should be Full Editor/Edit Menu/Preferences/Performance and the available Scratch Disks choices there. See Description under the Scratch Disks list for overall suggestions.
In Premiere Elements 8.0/8.0.1, the Scratch Disks will be found under the program's Edit Menu/Preferences/Scratch Disks.
Just do not move, delete, or rename any files/folders that are source media in a saved/closed project.
Major consideration is to check the new drive periodically to confirm that the drive letter is ot changing on you.
Did you know that you can import a raw format image into Premiere Elements, but you need to install the Camera Raw plug-in in Premiere Elements as well as Photoshop Elements. But, in a 32 bit operation and dealing with the huge dimensions of the raw image, image size is going to be a consideration in Premiere Elements 8.0/8.0.1.. The program will not let you import a still image with a total pixel count greater than 16777216 pixels.
ATR Premiere Elements Troubleshooting: PE: Maximum Still Image Size
More later. Sounding good.
ATR

Similar Messages

When i try to burn a blu ray it says failed

when i try to burn a blu ray disc it says failed i have burned a few before without any trouble

OK. So create a new user account – or trash your preferences – and see whether that resolves the problem. If you trash the prefs, you may want to use Digital Rebellion's Prefence Manager.
And just to confirm, Share options other than disk burning work OK?
Russ

HT1657 I'm getting a 42110 error when I try to play my rented movie. I've downloaded the movies twice but it's saying they aren't downloaded !

I'm getting a 42110 error when I try to play my rented movie from the istore. I've downloaded the movies twice but it's saying they aren't downloaded !

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

HT1222 MY 3 RD GENERATION KEEPS GETTING A DOWNLOAD ERROR WHEN I TRY AND DOWNLOAD THE IOS 7.02.

Everytime I try I try to update the software to IOS 7.0.2 ON my third generation IPAD, i keep getting a "download error" message

Try downloaded the update through iTunes on the computer instead of over wifi in the iPad.

I keep getting a 'program error' when I try to import an image

I just downloaded photoshop cc and when I try to import an image into my project it keeps giving me a 'program error' Does anyone else have this problem?

OK, then I don't know what would be causing it.
We haven't seen such problems on MacOS 10.9.
What else did you change on the system since it was last working?

I keep getting a Validation Error when I try to publish my site

I continually update my site and every time I've done it before I just click Publish and it updates all the changes I've made; but now when I click publish it tries to log in to sign in to Business Catalyst for a bit and then I get a Validation Error that says "Access using your AdobeID has timed out. Check your network connection and try again." My network connection is fine and I can log in using my AdobeID no problem so I have no idea why it's not working.

Hello,
Please try the following steps:-
1)Sign out of muse using Help-->Sign out.
2)Close all the adobe apps.
3)Sign out of CC app by expanding the top right gear like symbol-->Preferences-->Account-->Sign Out.
4)Sign in back to CC app.
5)Launch muse and try publishing again.
Regards,
Neha

I am now getting transcoding errors when I try to burn a DVD. Usually this can be overcome, but my latest project resists burning. Is it possible for a project to be too complicated?

Suggestions would be welcome!

Dear ATR
    I am using Première Elements 10 on a Mac Pro
    I was trying to burn to DVD-VIDEO widescreen, although I tried all the
options in desperation including folders!
    Space required was about 3.7 GB, but instead of filling the space
available, as it didn¹t work, I tried 2.5 GB without success.
    I use all Timeline menu markers including red ones to indicate the end
of a movie, as there are several in the project. Scene markers and stop
markers can therefore be close. Where there were red frames around button, I
moved the buttons away from each other as required.
    By complicated, I meant that my movies tend to include transitions
throughout movies and stills background music titles - clipart and
dialogue, which I considered might be too much for the system to handle!
    Since I posted my query, I have taken a lot of transitions out of the
movie (I usually choose a default transition of ³cross dissolve² between
each video/still in the set-up). This has worked, and subject to re-viewing
the movie, I am hoping that it is the cure and I will reset the defaults
accordingly.
    Thanks for you interest in my problem.
Best regards,
TopCat38.

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT2534 I keep getting unable to purchase when I try to download from app store on my ipad

I keep getting "unable to purchase when I try to update from app store

Contact iTunes Customer Service and request assistance...
Use this Link > Apple Support iTunes Store Contact

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

First, turn off your CAPS lock. Typing in all CAPS is considered screaming/yelling and many will simply ignore your posting.
Are you currently having issues? Is it when trying to purchase only on the device? Are you able to complete purchases via iTunes on your computer?

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

HT3728 I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

Hi Philjp,
If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Regards,
- Brenden

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

I keep getting a "Transcoding error" when I try to burn a blu ray. I have elements 8 and the clip is only about 8 1/2 minutes long

Similar Messages

Maybe you are looking for