I keep getting an error when I try to open iTunes, can anyone help me pleas
This is the information I get in the Error window
Error Signature
AppName:itunes.exe
AppVer: 6.0.5.20
ModName: unknown
ModVer: 0.0.0.0
Offset: 10001040
Reporting details:
This error includes: information regarding the condition of iTunes when the problem occurred; the operating system version and computer hardware in use; your Digital Product ID, which could be used to identify your license; and the IP address of your computer.
Offset: 10001040
an "itunes has encountered a problem ..." message on launch citing that offset is almost invariably caused by a broken QuickTime. (itunes needs a fully functional QT in order to work properly.)
try to open your QuickTime. does it launch properly? or do you get an error message, or some other peculiar behavior, or find that it isn’t on your PC at all?
if you get an error message (or peculiar behavior, or find that it’s missing), the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Installers … get the one that doesn’t mention itunes 6
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
Similar Messages
-
AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99220) -
I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623) -
help
Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors in iTunes?
-
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
I keep getting this error when I try to download apps or songs : MZCommerce.CreditBalance Mismatch.Mobile_message Can someone tell me how to get rid of this? It is very aggravating when trying to use the IPAD.
Try to go to Settings and then Store. Tap to your Apple ID and select View Apple ID. Now choose to check your payment information and when you're done tap Done. I had to rewrite my three digit code of the credit card and now it works.
Oh, I also activated Genius for Apps but I don't think it makes any difference. -
I am upgrading from iPhone 3 to 5. I have backed up my 3 on iTunes. I keep getting an error when I try to download all info to the 5. The error says I have disconnect my phone but I haven't. Happened multiple times. Any help would be appreciated.
Are you running iTunes 11.0.1 (current version)? If not, get it at http://www.apple.com/itunes
-
Why do I keep getting an error when I try to sync to iTunes? The error says "you don't have enough privileges?"
Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!
That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results. -
I get a runtime error when I try to open itunes, any help?
I get a runtime error when I try to open itunes, any help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I keep getting this message when I try to open FCP X. "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7". To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
I have no idea what this means. Particularly the part about "Brian-Massmans-Computer-7." I don't even know what computer that is.
I'm guessing it could have something to do with the fact that I've still got FCP 5 installed. But it's not running.Try repairing permission in the Disk Utility and rebooting,
-
I keep getting invalid signature when I try to downloand itunes 11.1. I have tried to just do a download and i have tried to change internet options to accept downloads without valid signature. but it still does not work. anyone have suggestions?
I just tested it (on 10.6.8) and it worked perfectly well, so it may be something on your computer. You could try creating a new user account on your Mac and using that to try downloading. You can then install on that account and it will be available on your normal one.
-
after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?
I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick! -
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
-
I'm getting this message when I try to open iTunes: This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes. (-42037) What do I do?
Do a back up then try reinstalling.
You should always back up before do an update, upgrade, anything with the system in case something goes wrong. That way you still have a current copy of your data.
Try starting in safe mode, then running the update. This will disable most 3rd party sofwarelike anti virus and other things prople put on their machines that can cause problems.
Safe mode:
Power off, power on holding the shift key, continue to hold until you see the progress BAR then re;ase and allow to finish booting. Note this will take longer than a regular boot. Login and try running software update or use the link here to download. Use an ethernet connection if possible as it is much less prone to corruption than wireless.
http://support.apple.com/kb/DL1614
After download and install logout and restart normally.
Maybe you are looking for
-
SQL Server 2005 SP2 Failed to install the update
I just purchased a Dell PC and during the start up one of the updates that tried to install was SQL Server 2005. I tried turning off my Anti Virus program and the install failed again. Everything I've read about this problem is too technical for me.
-
Parameter passing issue for HTMLDB report page
Hi, I have created a HTMLDB report based on SQL query in which the where clause column needs to takeup dynamic value each time. So I have defined a hidden item on the page PUSERID of Source type "Static Assigment". And this variable is used in SQL as
-
InContext and Spy Tabbed Panels
First I have to get it out of the way that I'm with everyone else who thinks it's silly that there is no indication as to what the InContext service will cost. Even if you could throw a ballpark out there it would help people decide whether or not to
-
Managing data connections (5800)
I'm looking for documentation on how to manage the data connections on my 5800. I presume the documentation would be similar on other s60 phones. For example: - Can I get applications to always connect silently to one of my previously configured wifi
-
Missing "disabled" state in skin
I have a custom component CircleProgress.mxml with two states: "default" and "other", using a skin with the same two states defined. But during compilation, there appears an error in the skin file: The required skin state "disabled" is missing. I don